RTD/HEMT串联型共振隧穿三极管的设计与研制

对RTD/HEMT串联型共振隧穿三极管进行了设计和研制.测量结果表明:最大电流峰谷比为17.6∶1,棚压对峰值电压调控能力在1.5～7.7范围内,-3dB截止频率为4GHz,此种器件可与HEMT在结构和工艺上兼容,可应用于HEMT高速电路.     

RTD/HEMT串联型RTT的设计与研制

依据RTD/HEMT串联型RTT的概念,设计了RTD/HEMT单片集成材料结构,该结构采用分子束外延技术生长.采用湿法化学腐蚀、金属剥离、台面隔离和空气桥互连技术,研制了RTD/HEMT串联型RTT,并对RTT及RTT中RTD和HEMT的直流特性进行了测试.测试结果表明:在室温下,器件具有明显的栅控负阻特性,正接型RTT的最大峰谷电流之比在2.2左右,反接型RTT的最大峰谷电流之比在4.6左右.实验为RTD/HEMT串联型RTT性能的优化和RTD/HEMT单片集成电路的研制奠定了基础.     

RTD/HEMT串联型RTT的设计与研制

依据RTD/HEMT串联型RTT的概念,设计了RTD/HEMT单片集成材料结构,该结构采用分子束外延技术生长.采用湿法化学腐蚀、金属剥离、台面隔离和空气桥互连技术,研制了RTD/HEMT串联型RTT,并对RTT及RTT中RTD和HEMT的直流特性进行了测试.测试结果表明:在室温下,器件具有明显的栅控负阻特性,正接型RTT的最大峰谷电流之比在2.2左右,反接型RTT的最大峰谷电流之比在4.6左右.实验为RTD/HEMT串联型RTT性能的优化和RTD/HEMT单片集成电路的研制奠定了基础.     

120nm栅长晶格匹配InGaAs/InAlAs HEMTs 器件研制

利用新型的PMMA/PMGI/ZEP520/PMGI四层胶电子束光刻胶研制出一种性能卓越的T型栅,该T型栅栅头宽980纳米,栅脚宽120纳米,有效地减小了栅的寄生电阻和电容效应, 增强了器件的高频特性。利用该T型栅工艺制备出的120nm栅长晶格匹配In0.53Ga0.47As/In0.52Al0.48As InP基HEMT器件获得了优越的直流和高频性能,电流增益截止频率和最大单向功率增益频率分别达到190 GHz 及 146 GHz。文中的材料结构和所有器件制备均为本研究小组自主研究开发。     

碳致深能级引起的AlGaN/GaN HEMT电流崩塌现象

AlGaN/GaN HEMT良好的功率特性虽然被大量报导,但其电流崩塌现象仍是一个令人困扰的问题,作者通过实验证明了导致其电流崩塌的一个因素.两个AlGaN/GaN样片被分别放在纯氮气和掺碳的氮气气氛中快速退火,利用XPS证明了后者中的碳元素含量远远大于前者.比较二者的I-V特性曲线,可发现碳杂质的引入可使AlGaN/GaN HEMT电流崩塌程度大大增加.分析表明:由碳杂质引入导致的深能级使得负栅压下俘获沟道中的载流子在正栅压下不能立刻释放,从而引起AlGaN/GaN HEMT中的电流崩塌现象.     

碳致深能级引起的AlGaN/GaN HEMT电流崩塌现象

AlGaN/GaN HEMT良好的功率特性虽然被大量报导,但其电流崩塌现象仍是一个令人困扰的问题,作者通过实验证明了导致其电流崩塌的一个因素.两个AlGaN/GaN样片被分别放在纯氮气和掺碳的氮气气氛中快速退火,利用XPS证明了后者中的碳元素含量远远大于前者.比较二者的I-V特性曲线,可发现碳杂质的引入可使AlGaN/GaN HEMT电流崩塌程度大大增加.分析表明:由碳杂质引入导致的深能级使得负栅压下俘获沟道中的载流子在正栅压下不能立刻释放,从而引起AlGaN/GaN HEMT中的电流崩塌现象.     

一种新型的常通型GaN HEMT器件

对新型常通型GaN HEMT器件的特性和参数进行了研究。阐述了其静态特性、动态特性及电流崩塌问题。针对其动态特性,与相近规格的Si MOSFET器件（TK2Q60D）在开通、关断时间与栅源电压的关系方面进行了对比,探讨了常通型GaN HEMT器件在不同输入电压和不同开关频率下的电流崩塌现象,并采用Boost电路,对常通型GaN HEMT器件和Si MOSFET器件的最高工作频率能力进行了对比。实验结果表明,常通型GaN HEMT器件具有更高的工作频率,且工作频率的升高不影响电流崩塌现象。     

直流大电压下GaN HEMT电流崩塌效应探索

基于GaN HEMT器件物理和实验分析测试结果，提出了一种GaN电流崩塌效应的新物理模型. 研究表明，在大漏极电压条件下，沟道电子易于注入到GaN缓冲层中，并被缓冲层中的陷阱所俘获，耗尽二维电子气，从而导致电流崩塌效应. 该模型描述了电流崩塌效应与缓冲层中陷阱的相互关系，并获得了电流崩塌前后迁移率与二维电子气浓度乘积的归一化值. 该结果可望用于GaN HEMT器件进一步的理论探讨和实验研究.     

RTD与HEMT在InP衬底上的单片集成

在半绝缘的50nm InP衬底上采用分子束外延的方法生长了RTD与HEMT的集成材料结构.RTD室温下峰谷电流比最高达到18.39,阻性截止频率大于20.05GHz.栅长为1μm的HEMT截止频率为19.8GHz,最大跨导为237mS/mm.由多个RTD串联形成的多峰值逻辑以及HEMT栅压调节RTD电流的特性也得以验证.     

GaN HEMT器件22元件小信号模型

采用了新型的包含22元件的GaN HEMT小信号模型,通过增加与栅源电容Cgs和栅漏电容Cgd并联的电导Ggsf和Ggdf来表征GaN HEMT栅漏电情况.结果表明22元件小信号模型拟合度提高,物理意义更为明确.同时重点改进了寄生电容参数的提取方法,可有效地提取新型栅场板、源场板器件小信号参数.由算法提取的参数值可准确反映GaN HEMT器件的物理特性.     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.