Environmentally Friendly Graphene Inks for Touch Screen Sensors

Graphene-based materials have attracted significant attention in many technological fields, but scaling up graphene-based technologies still faces substantial challenges. High-throughput top-down methods generally require hazardous, toxic, and high-boiling-point solvents. Here, an efficient and inexpensive strategy is proposed to produce graphene dispersions by liquid-phase exfoliation (LPE) through a combination of shear-mixing (SM) and tip sonication (TS) techniques, yielding highly concentrated graphene inks compatible with spray coating. The quality of graphene flakes (e.g., lateral size and thickness) and their concentration in the dispersions are compared using different spectroscopic and microscopy techniques. Several approaches (individual SM and TS, and their combination) are tested in three solvents (N-methyl-2-pyrrolidone, dimethylformamide, and cyrene). Interestingly, the combination of SM and TS in cyrene yields high-quality graphene dispersions, overcoming the environmental issues linked to the other two solvents. Starting from the cyrene dispersion, a graphene-based ink is prepared to spray-coat flexible electrodes and assemble a touch screen prototype. The electrodes feature a low sheet resistance (290 Ω □⁻¹) and high optical transmittance (78%), which provide the prototype with a high signal-to-noise ratio (14 dB) and multi-touch functionality (up to four simultaneous touches). These results illustrate a potential pathway toward the integration of LPE-graphene in commercial flexible electronics.     

Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

Energy efficiency of fibre reinforced soil formation at small element scale: Laboratory and numerical investigation

This paper explores the aspects related to the energy consumption for the compaction of unreinforced and fibre reinforced samples fabricated in the laboratory. It is well known that, for a fixed soil density, the addition of fibres invariably results in an increased resistance to compaction. However, similar peak strength properties of a dense unreinforced sample can be obtained using looser granular soil matrices mixed with small quantities of fibres. Based on both experimental and discrete element modelling (DEM) procedures, this paper demonstrates that less compaction energy is required for building loose fibre reinforced sand samples than for denser unreinforced sand samples while both samples show similar peak strength properties. Beyond corroborating the macro-scale experimental observations, the result of the DEM analyses provides an insight into the local micro-scale mechanisms governing the fibre-grain interaction. These assessments focus on the evolution of the void ratio distribution, re-arrangement of soil particles, mobilisation of stresses in the fibres, and the evolution of the fibre orientation distribution during the stages of compaction.     

CO2 sequestration by magnesite mineralisation through interaction of Mg-brine and CO2: integrated laboratory experiments and computerised geochemical modelling

ABSTRACT

Several Carbon Capture and Storage (CCS) techniques have been studied including injections of carbon dioxide (CO₂) into the mature and/or depleted hydrocarbon reservoirs and deep saline aquifers. This work aims to test storing CO₂ into the magnesium-rich evaporite strata and also into the stratigraphic intervals containing Mg-rich brines. The test simulates Mg-carbonation of the synthetic solution obtained from the Mg-evaporite mineral, bischofite – both experimentally in the laboratory condition and also through computerised geochemical simulation. The laboratory experiments, which resulted in the crystallisation of anhydrous magnesite, were analysed. The TOUGHREACT^TM, Geochemist’s Workbench^TM (GWB) and PHREEQC^TM software simulated the experiments as computerised geochemical model and tested the results for natural geological conditions. The geochemical simulations successfully demonstrate the immense CCS potential for the Mg-evaporite (as well as the sedimentary strata charged with Mg-evaporitic brine) at their subsurface geological occurrences at elevated pressure-temperature and high salinity.     

The effects of porosity,asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends

Asphalt concrete is the prevailing material used for road surface construction. Its adequate characteristics in providing stability, durability and driving safety are controlled by complex interactions between its components. Thus, it is important to estimate the sensitivity of asphalt concrete mechanical properties as a function of its volumetrics. For this study, different combinations between asphalt content (3.5, 5 and 7.5%) and porosity values (above 4%) were used in order to disassociate these properties. The influence of mixing in fiberglass (0.5%) was also analyzed. It was found that porosity is significantly more relevant than the asphalt content in the prediction of tensile strength and resilient modulus of fiber-free asphalt concretes. In fiber-reinforced mixtures, the mechanical properties are improved by increasing the asphalt content, which suggests a better bonding between fibers and aggregates. For both cases, decreasing porosity is beneficial. By grouping both sets of results, it was possible to create a unique theoretical curve for both the tensile strength (q_t) and the resilient modulus (RM). The RM/q_t ratio was 5800 for the fiber-free group, and 3900 for the fiber-reinforced group - suggesting a better fatigue life indicator for asphalt concretes when fibers are added.     

Effect of RF magnetron sputtering parameters on the optimization of the discharge capacity of ternary lithium oxide thin films

Journal of Materials Science: Materials in Electronics - The increasing demand for lithium-ion batteries has stimulated the investigation of new compounds in order to reduce the costs and the...     

Combining 1,3-Ditriazolylbenzene and Quinoline to Discover a New G-Quadruplex-Interactive Small Molecule Active against Cancer Stem-Like Cells

Quadruplex nucleic acids are promising targets for cancer therapy. In this study we used a fragment-based approach to create new flexible G-quadruplex (G4) DNA-interactive small molecules with good calculated oral drug-like properties, based on quinoline and triazole heterocycles. G4 melting temperature and polymerase chain reaction (PCR)-stop assays showed that two of these compounds are selective G4 ligands, as they were able to induce and stabilize G4s in a dose- and DNA sequence-dependent manner. Molecular docking studies have suggested plausible quadruplex binding to both the G-quartet and groove, with the quinoline module playing the major role. Compounds were screened for cytotoxicity against four cancer cell lines, where 4,4′-(4,4′-(1,3-phenylene)bis(1H-1,2,3-triazole-4,1-diyl))bis(1-methylquinolin-1-ium) ( 1 d ) showed the greater activity. Importantly, dose–response curves show that 1 d is cytotoxic in the human colon cancer HT-29 cell line enriched in cancer stem-like cells, a subpopulation of cells implicated in chemoresistance. Overall, this study identified a new small molecule as a promising lead for the development of drugs targeting G4 in cancer stem cells.     

Microstructure and flexural strength of the Y:TZP/BG composite

The addition of bioactive glasses to a Y:TZP matrix represents a feasible alternative to provide bioactivity to this material and optimize osseointegration. This work evaluated the effect of the BG concentration (0 and 10 wt%) and the sintering temperature (1200°C and 1300°C) on the microstructure, relative density, and flexural strength of the composite Y:TZP/BG. The Y:TZP and Y:TZP/BG powders were uniaxially pressed and sintered at 1200°C or 1300°C for 1 h. The microstructure was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray Spectroscopy. Relative density was calculated from density values obtained using the Archimedes’ principle. For the flexural strength, specimens (n = 6) were fractured in a biaxial flexural setup using a piston-on-three-balls fixture in a universal testing machine. Bioactivity test was performed in simulated body fluid solution. The results suggested that BG addition decreased the grain size of the composite, increased porosity and caused a significant decrease in the relative density and flexural strength. Crystalline phases of calcium stabilized cubic zirconia and sodium zirconium silicate were formed after the addition of BG. Finally, it was concluded that composite specimens sintered at 1300°C showed the highest density values and larger grains compared to those sintered at 1200°C.