Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.     

Different durations of whole raw soybean supplementation during the prepartum period: Measures of cellular immune function in transition cows

The objective of this study was to evaluate different durations of whole raw soybean (WS) supplementation (diet rich in n-6 fatty acid) during the prepartum period on cellular immune function of dairy cows in the transition period and early lactation. Thirty-one Holstein cows were used in a completely randomized design and assigned to 4 experimental groups (G) [G90, G60, G30, and G0 (control)] supplemented with a diet containing 12% of WS from 90, 60, 30 and 0 d relative to the calving date, respectively. Cows were dried off 60 d before the expected calving date. After parturition, all cows were fed a diet containing 12% of WS until 84 DIM. Blood samples were collected before the morning feeding (d ?56 ± 2, ?28 ± 2, ?14 ± 2, ?7 ± 2, at the day of partum, 7 ± 2, 14 ± 2, 28 ± 2, and 56 ± 2 relative to parturition). Cell phenotyping and phagocytosis assays were carried out using monoclonal antibodies and flow cytometry technique. Duration of WS supplementation linearly increased the percentage of blood CD3⁺ cells, as well as increased the percentage of blood CD8⁺ cells in the postpartum period, notably in G30, whereas the lowest values were observed in G0. Further, the duration of WS supplementation linearly increased the reactive oxygen species median fluorescence intensity of CH138⁺ cells after phagocytizing Staphylococcus aureus in the postpartum period. Longer periods of WS supplementation linearly increased phagocytosis median fluorescence intensity of CH138⁺ cells in the prepartum period of cows. Duration of WS supplementation linearly increased the percentage of blood CD14⁺ cells producing reactive oxygen species when stimulated either by Staph. aureus or Escherichia coli in the postpartum period. In conclusion, longer periods of WS supplementation during late lactation and the dry period (beginning on d 90 of the expected calving date) alter the leukocyte population and improve neutrophil immune response in the postpartum period with no detrimental effects on cow performance.     

Effect of RF magnetron sputtering parameters on the optimization of the discharge capacity of ternary lithium oxide thin films

Journal of Materials Science: Materials in Electronics - The increasing demand for lithium-ion batteries has stimulated the investigation of new compounds in order to reduce the costs and the...     

Microstructure and flexural strength of the Y:TZP/BG composite

The addition of bioactive glasses to a Y:TZP matrix represents a feasible alternative to provide bioactivity to this material and optimize osseointegration. This work evaluated the effect of the BG concentration (0 and 10 wt%) and the sintering temperature (1200°C and 1300°C) on the microstructure, relative density, and flexural strength of the composite Y:TZP/BG. The Y:TZP and Y:TZP/BG powders were uniaxially pressed and sintered at 1200°C or 1300°C for 1 h. The microstructure was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray Spectroscopy. Relative density was calculated from density values obtained using the Archimedes’ principle. For the flexural strength, specimens (n = 6) were fractured in a biaxial flexural setup using a piston-on-three-balls fixture in a universal testing machine. Bioactivity test was performed in simulated body fluid solution. The results suggested that BG addition decreased the grain size of the composite, increased porosity and caused a significant decrease in the relative density and flexural strength. Crystalline phases of calcium stabilized cubic zirconia and sodium zirconium silicate were formed after the addition of BG. Finally, it was concluded that composite specimens sintered at 1300°C showed the highest density values and larger grains compared to those sintered at 1200°C.     

Electrospun curcumin/polycaprolactone/copolymer F-108 fibers as a new therapy for wound healing

The application of fibers associated with drugs is a promising alternative to meet the clinical needs of tissue repair. Curcumin exhibits great cicatricial potential because it has numerous pharmacological properties. This research aimed to produce fibers of polycaprolactone and copolymer F-108 associated with curcumin and to evaluate in vivo their action on the process of wound healing. The fibers were produced by electrospinning technique and characterized by scanning electron microscopy (SEM), X-ray diffractometry (XRD), and fluorescence microscopy. They were applied in cutaneous wounds of rats for the analysis of photoacoustic permeation and histological study. The characterization showed that the electrospinning allowed the preparation of homogeneous material with curcumin. The fibers benefited healing of the wounds and allowed the permeation of curcumin at all stages. The use of PCL/F-108 fibers allowed the elaboration of a new curcumin delivery system, improving its bioavailability and action in the healing of excisional wound. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48415.     

Determination of sensory thresholds of Mentha piperita L. essential oil in selected tropical fruit juices and efficacy of sensory accepted concentrations combined with mild heat to inactivate foodborne pathogens

This study determined the compromised acceptance threshold (CAT) and rejection threshold (RT) of Mentha piperita L. essential oil (MPEO) in cajá, guava and mango juices. The MPEO concentrations below the RT values were evaluated alone or combined with mild heat treatment (MHT; 54 °C) to inactivate ≥5-log₁₀ of Escherichia coli O157:H7 and Salmonella Enteritidis PT 4 in the same juices. The CAT of MPEO varied from 0.30 to 0.32 μL mL⁻¹, while the RT was 1.34 or 1.36 μL mL⁻¹ in the tested juices. Only concentrations of MPEO close, or higher than the RT caused ≥5-log₁₀ reductions in the tested pathogens in cajá, guava and mango juices. Combined with MHT, concentrations of MPEO below the RT reduced ≥5-log₁₀ of both pathogens in juices. These findings indicate that MPEO concentrations below the RT in combination with MHT is a feasible preservation technology to ensure the safety of tropical fruit juices.     

Proteome changes in lamb semimembranosus muscles associated with the inclusion of sunflower cake in their diet

A diet based on sunflower cake for lambs was assayed in order to reuse biodiesel industrial by-products with the aim of reducing livestock costs and evaluating their influence on meat quality. To achieve these goals, sixteen male lambs were fed diets containing different levels of sunflower cake (control, 5%, 10% and 15%). Afterwards, their semimembranosus muscles were analysed by two-dimensional electrophoresis coupled to mass spectrometry and their functional protein association was examined using STRING. Structural and metabolic proteins in the lambs’ proteomes changed significantly according to their diet. Fifteen proteins showed significant changes caused by the inclusion of sunflower cake, and the most differentially abundant structural proteins were detected in 2-DE gels from the lambs. Differentially abundant metabolic proteins such as ENO3 (enolase 3), MDH1 (malate dehydrogenase) and ALDH1A1 (retinal dehydrogenase) have been proposed as biomarkers of quality parameters in other species.     

Development of Brazilian steel construction

This article presents a concise short overview of the development of the steel industry in Brazil, with the emphasis on civil construction. The relatively rapid increase in the application of steel structures for both low and tall buildings and the modern bridges in Brazil are the results of an extensive effort of the steel producers and the improvement of steel courses and research programmes in several universities and institutions during the last two decades. The steel industry in collaboration with the universities, which have provided the results of their recent studies, contributed to the improved steel technologies and composite construction. Data, supplied by the Brazilian Institute of Metallurgy, IBS, is presented on the actual steel production and fabrication with regard to application in civil engineering. Case studies of steel structures, such as multi-storey buildings, space structures, light gauge steel construction and bridges, are presented and commented on. Further, steel structures subjected to corrosion or to fire, as well as steel and composite semi-rigid joints, are mentioned and finally the Brazilian experience with steel architecture is introduced.     

Effects of porosity,dry unit weight,cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures

One of the conventional ways to improve the mechanical behavior of soils is to mix them with cementing agents such as cement, lime and fly ash. Recently, introduction to alternative materials or sub-products that can be adopted to improve the soil strength is of paramount importance. Therefore, the present study aims to investigate the effects of porosity (η), dry unit weight (γ_d) of molding, cement content (C) and porosity/volumetric cement content ratio (η/C_iv) or void/cement ratio on the unconfined compressive strength (q_u or UCS) of silty soil–roof tile waste (RT) mixtures. Soil samples are molded into four different dry unit weights (i.e. 13 kN/m³, 13.67 kN/m³, 14.33 kN/m³ and 15 kN/m³) using 3%, 6% and 9% cement and 5%, 15% and 30% RT. The results show that with the addition of cement, the strength of the RT–soil mixtures increases in a linear manner. On the other hand, the addition of RT decreases q_u of the samples at a constant percentage of cement, and the decrease in porosity can increase q_u. A dosage equation is derived from the experimental data using the porosity/volumetric cement content ratio (η/C_iv) where the control variables are the moisture content, crushed tile content, cement content and porosity.