Coupled-line-based millimeter-wave CMOS spiral power dividers with tapered TLs

Analog Integrated Circuits and Signal Processing - We propose a power divider comprising of two parallel λ/4 coupled lines with a shared input signal line. An isolation resistor R is included...     

Detection of fresh palm oil adulteration with recycled cooking oil using fatty acid composition and FTIR spectral analysis

There is a growing concern over the food safety issue related to increased incidence of cooking oil adulteration with recycled cooking oil (RCO). The objective of this study was to detect fresh palm olein (FPO) adulteration with RCO using fatty acid composition (FAC) and Fourier-transform infrared spectroscopy (FTIR) spectral analyses combined with chemometrics. RCO prepared in the laboratory was mixed with FPO in the proportion ranged from 1% to 50% (v/v) to obtain the adulterated oil samples (AO). FACs for FPO, RCO, and AO were determined using gas chromatography equipped with a flame ionization detector (GC-FID). The compositions of most fatty acids in RCO lied within the normal ranges of Codex standard, except for C8:0, C10:0, C11:0, C15:0, trans C18:1, and polyunsaturated fatty acids (PUFAs), C20:5. PUFAs showed a consistent decreasing trend with increasing magnitude of change with respect to increasing adulteration level and thus might be a good indicator for detecting FPO adulteration with RCO. The evaluation parameters (coefficient of determination, root mean standard error) of the FTIR-partial least square (PLS) model of palm oil adulteration with recycled oil are R² = 0.995 and 3.25, respectively. For FTIR spectral analysis, the distinct variations in spectral regions and aberrations in characteristic bands between FPO and RCO were observed. The optimized PLS calibration model developed from normal spectral of the combined region at 3602–3398, 3016–2642, and 1845–650 cm^?1 overpredict the adulteration level. On the other hand, the discriminant analysis classification model was able to classify the FPO and AO into two distinct groups. Improvement of the principles of combined techniques in authenticating AO from fresh oil is beneficial as a guideline to detect adulteration in cooking oil.     

Study on emotion recognition and companion Chatbot using deep neural network

Multimedia Tools and Applications - With the development of technology, the importance of the research on speech emotion recognition and semantic analysis has increased. The research is primarily...     

A novel route for synthesis of alumina–chromium carbide composites from PTFE-activated Cr2O3/Al/C combustion

Fabrication of alumina-chromium carbide composites was investigated by PTFE-activated Cr₂O₃/Al/C combustion synthesis. PTFE was employed as not only a reaction promoter, but a carburizing agent. Three reaction systems were prepared with different contents of carbon for the synthesis of Cr₂₃C₆, Cr₇C₃, and Cr₃C₂. The amounts of PTFE were selected to ensure combustion synthesis in the SHS (self-propagating high-temperature synthesis) mode and to provide carbon in quantities of 15 and 25?mol% of the total carbon. Experimental results showed that the combustion wave velocity and temperature decreased with increasing carbon, but increased with PTFE. A correlation between combustion wave velocity and temperature contributed to determination of the activation energy E_a =?89.15?kJ/mol for the combustion reaction. The increase of PTFE also improved formation of chromium carbides. As a result, the Cr₂₃C₆– and Cr₇C₃–Al₂O₃ composites were produced with almost no impurities. Due to a loss of carbon in carbothermic reduction, the Cr₃C₂–Al₂O₃ composite was obtained with Cr₇C₃ as the secondary carbide. SEM micrographs and DES analyses indicated that spherical carbide grains with a size of 0.5–3.0 μm were synthesized.     

Properties of polyamide 6,10/poly(vinyl alcohol) blends and impact on oxygen barrier performance

The oxygen transmission rate, average volume of free‐volume cavities (V_f) and fractional free volume (F_v) of polyamide 6,10 (PA610)/poly(vinyl alcohol) (PVA) (i.e. PA610_xPVA⁰⁵_y, PA610_xPVA⁰⁸_y and PA610_xPVA¹⁴_y) blend films reduced to minimum values when their PVA contents reached corresponding optimal values. Oxygen transmission rate, V_f and F_v values obtained for optimal PA610_xPVA^z_y blown films were reduced considerably with decreasing PVA degrees of polymerization. The oxygen transmission rate of the optimal bio‐based PA610₈₀PVA⁰⁵₂₀ blown film was only 2.4 cm³ (m²·day·atm)^?1, which is about the same as that of the most often used high‐barrier polymer, ethylene–vinyl alcohol copolymer. Experimental findings from dynamic mechanical analysis, differential scanning calorimetry, wide‐angle X‐ray diffraction and Fourier transform infrared spectroscopy of the PA610_xPVA^z_y blends indicate that PA610 and PVA in the blends are miscible to some extent at the molecular level when the PVA contents are less than or equal to the corresponding optimal values. The considerably enhanced oxygen barrier properties of the PA610_xPVA^z_y blend films with optimized compositions are attributed to the significantly reduced local free‐volume characteristics. © 2017 Society of Chemical Industry     

Heat Killed Lactobacillus reuteri GMNL-263 Reduces Fibrosis Effects on the Liver and Heart in High Fat Diet-Hamsters via TGF-β Suppression

Obesity is one of the major risk factors for nonalcoholic fatty liver disease (NAFLD), and NAFLD is highly associated with an increased risk of cardiovascular disease (CVD). Scholars have suggested that certain probiotics may significantly impact cardiovascular health, particularly certain Lactobacillus species, such as Lactobacillus reuteri GMNL-263 (Lr263) probiotics, which have been shown to reduce obesity and arteriosclerosis in vivo. In the present study, we examined the potential of heat-killed bacteria to attenuate high fat diet (HFD)-induced hepatic and cardiac damages and the possible underlying mechanism of the positive effects of heat-killed Lr263 oral supplements. Heat-killed Lr263 treatments (625 and 3125 mg/kg-hamster/day) were provided as a daily supplement by oral gavage to HFD-fed hamsters for eight weeks. The results show that heat-killed Lr263 treatments reduce fatty liver syndrome. Moreover, heat-killed Lactobacillus reuteri GMNL-263 supplementation in HFD hamsters also reduced fibrosis in the liver and heart by reducing transforming growth factor β (TGF-β) expression levels. In conclusion, heat-killed Lr263 can reduce lipid metabolic stress in HFD hamsters and decrease the risk of fatty liver and cardiovascular disease.     

Structure-Activity Relationship and Crystallographic Studies on 4-Hydroxypyrimidine HIF Prolyl Hydroxylase Domain Inhibitors

The 2-oxoglutarate-dependent hypoxia inducible factor prolyl hydroxylases (PHDs) are targets for treatment of a variety of diseases including anaemia. One PHD inhibitor is approved for use for the treatment of renal anaemia and others are in late stage clinical trials. The number of reported templates for PHD inhibition is limited. We report structure–activity relationship and crystallographic studies on a promising class of 4-hydroxypyrimidine-containing PHD inhibitors.     

Physical study of room‐temperature‐cured epoxy/thermally reduced graphene oxides with various contents of oxygen‐containing groups

In this study, the effects of different oxygen‐containing group contents in thermally reduced graphene oxides (TRGs) for enhancing the physical properties of epoxy nancomposites was examined. The epoxy/TRG nanocomposites (ETNs) were prepared by a room temperature curing method in the presence of TRGs containing different oxygen‐containing groups and were then characterized by Fourier transform infrared spectroscopy. TRG contents with higher oxygen‐containing group contents (ca 33%) were found to show better dispersion capability in the epoxy matrix than TRGs with lower oxygen‐containing group contents (ca 11%) based on morphological observations by transmission electron microscopy. The better dispersion capability of TRGs with higher oxygen‐containing group contents in ETN membranes was found to lead to significantly enhanced mechanical strength, thermal stability and thermal conductivity based on measurements of dynamic mechanical analysis, tensile tests, thermogravimetric analysis and by the transient plane source technique. © 2014 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry