Equivalent transformations for the mixed lumped Brune-type sectionand uniform transmission line

As an analytical method for nonuniform transmission lines (NTLs) equivalent transformations are extended to a more general case, namely a mixed lumped Brune-type section and a uniform transmission line (unit element, UE). Circuits consisting of a cascade connection of a lumped Brune section and a UE are equivalent to one consisting of a cascade connection of a nonuniform transmission line whose characteristic impedance distribution is expressed with a trigonometric function and a lumped Brune section. This equivalent transformation method is easily applied to a circuit consisting of a lumped C section and a UE. The equivalent circuit is a circuit consisting of an NTL and a lumped C section. In this case, the characteristic impedance distribution of the NTL may be expressed in terms of a hyperbolic function. Exact network functions of the NTLs are easily obtained from the equivalent circuits without solving the telegrapher's equation. By considering the limiting case of these equivalent transformations, equivalent transformations for circuits consisting of a cascade connection of a lumped resonance circuit and a circuit and a uniform transmission line are derived     

Some Theoretic Results on a Digital EMG Signal Processor

As is well known, a general EMG signal processing scheme includes a prewhitening filter, a v-order detector, a smoothing filter, and a relinearizer. In this paper, a theoretical analysis of such a scheme is carried out, including a detector characteristic which presents a logarithmic behavior.     

Unifying probabilistic and variational estimation

A maximum a posteriori (MAP) estimator using a Markov or a maximum entropy random field model for a prior distribution may be viewed as a minimizer of a variational problem.Using notions from robust statistics, a variational filter referred to as a Huber gradient descent flow is proposed. It is a result of optimizing a Huber functional subject to some noise constraints and takes a hybrid form of a total variation diffusion for large gradient magnitudes and of a linear diffusion for small gradient magnitudes. Using the gained insight, and as a further extension, we propose an information-theoretic gradient descent flow which is a result of minimizing a functional that is a hybrid between a negentropy variational integral and a total variation. Illustrating examples demonstrate a much improved performance of the approach in the presence of Gaussian and heavy tailed noise. In this article, we present a variational approach to MAP estimation with a more qualitative and tutorial emphasis. The key idea behind this approach is to use geometric insight in helping construct regularizing functionals and avoiding a subjective choice of a prior in MAP estimation. Using tools from robust statistics and information theory, we show that we can extend this strategy and develop two gradient descent flows for image denoising with a demonstrated performance.     

Filter-embedded design and its applications to passive components

A design in which a filter is embedded in a fiber fixed on a substrate is proposed. It was successfully applied to the fabrication of low loss fiber optic components for a single-mode fiber transmission system. These components have a wide operational temperature range. The design is easily adapted to a multifilter or multifiber component. Filter embedding is achieved in two ways. One is to insert a thin filter chip in a slit which is machined into a fiber fixed on a substrate by a dicing saw (filter inserted type). The other is to evaporate a filter film directly on a fiber end face and butt this fiber to another fiber on a guide groove on a substrate (filter evaporated type)     

环Zn上椭圆曲线的密钥交换协议

设n=pq,p,q为奇素数,环Z_n上的椭圆曲线E_n(a,b)的SOM密钥交换协议与QV密钥交换协议均选取E_n(a,b)上的阶为M_n=lcm{#E_p(a,b),＃E_q(a,b)}的点G作为公钥(称G为基点),并且限定其对应的E_p(a,b)和E_q(a,b)均为循环群,这就限制了这两个协议只能选择一类特殊的椭圆曲线E_n(a,b)构作密钥交换协议.本文指出,E_p(a,b)和Eq(a,b)均为循环群这一限定是不必要的.本文给出了E_n(a,b)上存在阶为M_n的点G的一个充分必要条件,并给出一个例子,其中E_p(a,b)为循环群,E_q(a,b)为非循环群,且对应的E_n(a,b)上有阶为M_n的点G.同时,本文选取E_n(a,b)上阶为lcm{n₁,m₁}的点作为基点,这里n₁,m₁分别为E_p(a,b)和E_q(a,b)的最大循环子群的阶.这样,就能够选择更多的椭圆曲线E_n(a,b),用来构作密钥交换协议(包括将两方之间的密钥交换协议扩展到三方).     

A W-Band Air-Cavity Filter Integrated on a Thin-Film Substrate

In this letter, a W-band air-cavity filter has been developed on a thin-film substrate using a lossy silicon substrate as a base plate, which is suitable for a mm-wave system-on-package. The lossy silicon suppresses a parasitic substrate mode excited in a thin-film substrate, while a coupling loss between a transmission line and a resonator is minimized by etching the backside of the lossy silicon substrate underneath the coupling area. In the backside etching process, 70 mum of silicon was left for mechanical support of the thin-film substrate. The resonator was fabricated using a low-cost silicon micromachining technique and was flip-chip integrated on a thin-film substrate. The fabricated air-cavity resonator showed an unloaded Q of 851 at a resonant frequency of 94.18 GHz. Improvement in the coupling loss by the backside etching process was verified with measurement results. The fabricated filter exhibited an insertion loss of 1.75 dB and a return loss better than 14.5 dB with a 1.3% 3 dB fractional bandwidth at a center frequency of 93.8 GHz.     

Remote-controlled platoon merging via coder-estimator sequence algorithm for a communication network

In this paper, a platoon-merging control system is considered as a remotely located system with a state represented by a stochastic process. In this system, it is common to encounter situations where a single decision maker controls a large number of subsystems, and observation and control signals are sent over a communication channel with finite capacity and significant transmission delays. Unlike a classical estimation problem where the observation is a continuous process corrupted by additive noise, there is a constraint that the observation must be coded and transmitted over a digital communication channel with finite capacity. A recursive coder-estimator sequence is a state estimation scheme based on observations transmitted with finite communication capacity constraint. In this paper, we introduce a stochastic model for the lead vehicle in a platoon of vehicles in a lane considering the angle between the road surface and a horizontal plane as a stochastic process. In order to merge two platoons, the lead vehicle of the following platoon is controlled by a remote control station. Using the coder-estimator sequence, the remote control station designs the feedback controller. The simulation results show that the inter-vehicle distance and the deviation from the desired inter-vehicle distance are well regulated.     

Simultaneous compression and amplification of ultrashort pulses atMHz repetition rates

The authors report simultaneous compression and chirped pulse amplification at megahertz repetition rates of ultrashort pulses using a cavity-dumped dye laser with a pumping argon ion laser as the amplifier. In a single stage, the pulse is compressed by a factor of 25 and the energy per pulse is simultaneously increased by a factor of 2, without reducing the repetition rate. Starting with a pulse that has a duration of 4.3 ps and a peak power of 5.8 kW, a pulse with a duration of 170 fs and a peak power of 294 kW is obtained. A second stage of pulse compression is used to obtain a broadband pulse with a duration >~50 fs and a peak power of ~100 kW at 2 MHz     

A note on the iterative application of Bayes' rule

Alterations in probability densities produced by iterative application of Bayes' rule are analyzed. Computational requirements for finding a sequence of a posteriori densities remain reasonable despite a growing sample size if and only if a sufficient statistic expressible as a vector of fixed dimension exists. The existence of such a sufficient statistic also insures existence of reproducing a priori probability densities (a priori probability densities insuring that the a posteriori densities are in the same family). The theory is applied to find a class of sequential Bayes estimators for a Gaussian covariance matrix, and to treat a variety of adaptive "Bayesian learning" schemes in a unified manner.     

Two-port active coupled microstrip antenna

A multilayer structure, based on a patch antenna coupled through a nonresonant slot to a pair of feeding microstrips is a versatile module which can be used as a radiating and resonating element in a number of different configurations. Direct connection to a low cost transistor in a feedback loop results in a very simple active antenna, as reported. Different termination conditions at the four microstrip ports give rise to a number of alternative configurations for active generation/detection and multipatch arrays.<>     

High-speed sensory-motor fusion based on dynamics matching

This paper discusses a design concept of a sensory-motor fusion system to achieve high performance in a dynamic changing environment. From the viewpoint of a dynamic system, the new concept called "dynamics matching" is proposed to match the dynamics constraints of a system. Based on this concept, we describe a high-speed vision chip that has a general purpose parallel processing array along with a photodetector all in a single silicon chip. Next we describe a new sensory-motor fusion system which consists of a hierarchical parallel processing system, a vision chip system, and a multifingered hand-arm. All sensory feedback, including visual feedback, can be achieved in 1 ms. In addition, as an application of the system, we demonstrate high-speed grasping using visual and force feedback.     

Stereo‐Vision‐Based Human‐Computer Interaction with Tactile Stimulation

If a virtual object in a virtual environment represented by a stereo vision system could be touched by a user with some tactile feeling on his/her fingertip, the sense of reality would be heightened. To create a visual impression as if the user were directly pointing to a desired point on a virtual object with his/her own finger, we need to align virtual space coordinates and physical space coordinates. Also, if there is no tactile feeling when the user touches a virtual object, the virtual object would seem to be a ghost. Therefore, a haptic interface device is required to give some tactile sensation to the user. We have constructed such a human‐computer interaction system in the form of a simple virtual reality game using a stereo vision system, a vibro‐tactile device module, and two position/orientation sensors.     

Compact and low-loss interleave filter employing lattice-form structure and silica-based waveguide

This paper describes a compact and practical interleave filter with uniform multi/demultiplexing properties and a wide operational wavelength range realized by using a lattice-form structure and a silica-based waveguide. In the design, we optimized the bandwidth by controlling the lattice stage number and the loss ripple in the spectrum. Moreover, we propose a novel coupler with a large fabrication tolerance, a new tandem configuration that provides uniform characteristics and low dispersion, a polarization dependence compensation method, and a folded configuration, which are effective in realizing a high-performance interleave filter. Based on the above techniques, we fabricated a 50-GHz channel spacing interleave filter by using planar-lightwave-circuit technologies and demonstrated that it performed well throughout the C-band, exhibiting a low insertion loss of about 2 dB, a low chromatic dispersion of within +/-20 ps/nm, a 1-dB passband width of over 34 GHz, and a 30-dB stopband width of over 25 GHz, which are sufficient for a 10-Gbps transmission system.     

A Note on Loaded Line Synthesis (Correspondence)

The purpose of this note is to present an alternate derivation of a formula for the synthesis of a loaded line. The problem is to determine the values of the normalized susceptances a and c mounted an exact quarter-wavelength apart along a uniform line. These are arranged in the order a, c, c,. . .c, a to achieve a loaded line with a given phase shift and perfect match. In order to analyze a particular line design for standing-wave ratio and phase shift over a band of frequencies on a digital computer, it is worthwhile to know the values of the susceptances to many more decimal places than one would achieve from a simple graph.     

Real-time algorithm for retinal tracking

Conventional retinal laser photocoagulation is presently performed by an ophthalmologist manually aiming a low-power laser beam at a desired site and firing a high-power laser for a preselected interval of time. To automate this process a retinal tracker must acquire a target, track small saccades, and identify loss of track during a large saccade. The authors successfully implemented a real-time algorithm that used a simple computer, video digitizing card, low light video camera, and fundus camera to perform rudimentary tracking on a photograph of a retina undergoing smooth circular motion. The algorithm tracked speeds up to 5 Hz, or 27°/s, which equated to the retina moving in a 525 μm diameter circle     

Admittance of a waveguide radiating into stratified plasma

A slot covered by a stratified plasma is assumed to radiate into a wide waveguide instead of free space. The slot admittance approximates the free space admittance of the slot for waveguide diameters exceeding 6 to10lambda. For thick plasma layers the computed slot admittance checks with earlier admittance calculations for a laterally unbounded plasma. When approximating a plasma profile of a typical hypersonic re-entry, a multilayer plasma model in a wide waveguide appears to provide a more accurate slot admittance than a single-layer approximation in a laterally unbounded geometry.     

Improvement of the design of 180° rat-race hybrid

An innovative and simple design for a 180° rat-race hybrid is proposed which has a substantially improved phase shift characteristic over a large bandwidth compared with that of a conventional rate-race hybrid. The proposed hybrid has been fabricated with a three-dimensional technology to benefit from a high level of integration. It exhibits a bandwidth of 31% from 28.8 to 39.4 GHz with -15 dB input and output matching, a coupling loss of 4.6 dB with a power dividing balance better than 1.1 dB, and a phase balance better than 2     

Virtual impedance control for a regional dynamic voltage restorer

A dynamic voltage restorer (DVR) can be installed in a middle-voltage (MV) power grid, to concurrently protect a cluster of sensitive loads from voltage sags. To further improve its efficiency and reduce the difficulty in its implementation, a novel control strategy for operating such a DVR as a virtual impedance in series with sensitive loads is proposed in this paper. In addition to its usual function of compensating for voltage sags, such a DVR can also operate as a virtual inductance, to function as a fault current limiter (FCL) during a downstream fault, or a virtual capacitance, to function as a series compensator (SC) to compensate the voltage loss along the feeder line during heavy load. Based on a dual-loop control design, strategies for operating a DVR as a series virtual inductance and a virtual capacitance are proposed, and methods for tuning the parameter values and a stability analysis of the whole system are presented. The feasibility and effectiveness of the proposed method are verified by simulations using the PSCAD software, and experimental results obtained using a prototype DVR are presented.     

An X‐Band Carbon‐Doped InGaP/GaAs Heterojunction Bipolar Transistor MMIC Oscillator

This paper addresses a fully‐integrated low phase noise X‐band oscillator fabricated using a carbon‐doped InGaP heterojunction bipolar transistor (HBT) GaAs process with a cutoff frequency of 53.2 GHz and maximum oscillation frequency of 70 GHz. The oscillator circuit consists of a negative resistance generating circuit with a base inductor, a resonating emitter circuit with a microstrip line, and a buffering resistive collector circuit with a tuning diode. The oscillator exhibits 4.33 dBm output power and achieves ?127.8 dBc/Hz phase noise at 100 kHz away from a 10.39 GHz oscillating frequency, which benchmarks the lowest reported phase noise achieved for a monolithic X‐band oscillator. The oscillator draws a 36 mA current from a 6.19 V supply with 47.1 MHz of frequency tuning range using a 4 V change. It occupies a 0.8 mm × 0.8 mm die area.