Discussing Arab Spring’s effect on scientific productivity and research performance in Arab countries

Scientometrics - This research letter discusses whether Arab Spring explains the changes in research productivity and impact of Arab countries by identifying non-sociopolitical factors that can be...     

Numerical assessment of tunnel collapse: a case study of a tunnel at the East–West Algerian highway

Bulletin of Engineering Geology and the Environment - Construction of long tunnels in difficult sites is associated with various risks. Such risks are usually resulted on one hand from the lack of...     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.     

Chain extension of polyamide 6/organoclay nanocomposites

Thermal degradation of polyamide 6 (PA6)/organoclay nanocomposites is a serious impediment to wider applications of these nanocomposites. In this study, a solution is proposed based on the well‐established use of chain extenders. As in PA6, thermal degradation, in the absence of moisture, produces broken polymer chains with amide end groups, a chain extender with anhydride functionalities, known to be strongly reactive with amide groups, was used to reconnect the chains. Experiments conducted using a laboratory twin‐screw extruder were first checked, through transmission electron microscopy observations, to have produced good organoclay intercalation and exfoliation into PA6. Following from this, samples with the chain extender added were produced and characterized. The data obtained were conclusive in the effectiveness of the chain extender: for the chain extended nanocomposites, there is an enhancement in the value of the complex viscosity by 7 times and in the storage modulus by 88 times, while the tensile modulus increased by 57% compared with the neat PA6. The nonchain extended nanocomposite achieved in comparison an enhancement of 2 times the value of the complex viscosity and 19 times the storage modulus while the tensile modulus increased by 53% compared to the neat PA6. These data provide conclusive proof on the rationale that anhydride functionalities should be sought when developing chain extenders for PA6 nanocomposites. POLYM. ENG. SCI., 59:1233–1241 2019. © 2019 Society of Plastics Engineers     

Siting of PV power plants on inclined terrains

Most of the studies conducted on solar energy assessment and solar system siting focus on flat terrains that are usually difficult and expensive to acquire in urban areas. This paper investigates the possibility of using inclined terrains for siting photovoltaic (PV) power plants surrounding urban area. Both analytical analysis and simulations are carried out in order to analyse and validate the effectiveness and benefits of the use of inclined land for PV siting. Geographical information system and numerical weather prediction were used to implement the suggested original approach and to select suitable inclined terrains for the PV system installation and to calculate the total generation potential for energy production. Muscat, the capital of Oman, was selected as a reference for the implementation of this approach.     

Ceria and zirconia modified natural clay based nickel catalysts for dry reforming of methane

Ce and Zr promoted Fe/Cu-modified natural clay based catalysts were prepared and tested in dry reforming of methane (DRM) at temperatures from 600 to 800 °C. The physicochemical properties of these catalysts were analyzed by means of N₂ adsorption, X-ray diffraction (XRD). H₂-temperature programmed reduction (H₂-TPR) and CO₂-temperature programmed desorption (TPD). Ce and Zr promotion resulted in a considerable increase of the catalytic activity. This increase can be mainly ascribed to an improved reducibility of Ni species, together with slightly higher Ni⁰ crystal size, that, on the other hand, also catalyze undesired parallel reactions resulting in carbon formation, such as direct methane decomposition. Both Ce and Zr presence also promoted the presence of weak and medium strength basic sites, which are thought to favor CO₂ adsorption and desorption on the catalyst surface, leading to enhanced catalytic activity.     

On the performance of heterogeneous MANETs

Recent decades have witnessed the birth of major applications of wireless communication technology, further supported by the increasing capabilities of portable devices, low cost and ubiquitous presence. Despite radio technology diversity, a great deal of existing research focuses on a single and isolated wireless technology at a time, where homogeneous elements are identified by IP addresses. This work presents a heterogeneous technology routing (HTR) Framework, targeted towards scenarios where the heterogeneity of devices and networking technologies is present. Our contribution is many fold. It consists of a framework, which encompasses a process for bootstrapping networks, a routing protocol capable of dealing with multiple network interfaces, and a tuning with multipath extensions. We evaluate the performance of the bootstrap, routing and multipath mechanisms by way of simulation and an actual testbed implementation. The multipath evaluation simulates HTR networks with WiMAX, 3GPP LTE and Wi-Fi support. Results show that our proposal can effectively improve the data delivery ratio for ad-hoc networks and that it reduces the end-to-end delay without major impact on network energy consumption. As part of HTR tuning, we investigate next the impacts of tuning the HELLO refresh interval timer on route convergence and its subsequent energy consumption reduction during this phase. We also compare our tuned HTR with the widely used optimized link state routing protocol. Results show that varying the HELLO refresh interval can improve the convergence time and reduce the energy consumption without major impact on network behavior. Our proposal also includes a new distributed address allocation algorithm, namely, the dynamic node configuration protocol (DNCP). This paper conducts a comparative analysis between the Prime, Prophet and the DNCP schemes using static and dynamic topologies in terms of network setup time, energy consumption and control message overhead. Results show that the DNCP had a lower battery power consumption and less control message overhead while it slightly suffers with regard to setup.