Phase-field approach to simulate BCC-B2 phase separation in the AlnCrFe2Ni2 medium-entropy alloy

Journal of Materials Science - Phase separation is a relevant mode of transformation for microstructure development in multicomponent alloys. Its occurrence can drastically alter the composition...     

Divide-and-Conquer Matrisome Protein (DC-MaP) Strategy: An MS-Friendly Approach to Proteomic Matrisome Characterization

Currently, the extracellular matrix (ECM) is considered a pivotal complex meshwork of macromolecules playing a plethora of biomolecular functions in health and disease beyond its commonly known mechanical role. Only by unraveling its composition can we leverage related tissue engineering and pharmacological efforts. Nevertheless, its unbiased proteomic identification still encounters some limitations mainly due to partial ECM enrichment by precipitation, sequential fractionation using unfriendly-mass spectrometry (MS) detergents, and resuspension with harsh reagents that need to be entirely removed prior to analysis. These methods can be technically challenging and labor-intensive, which affects the reproducibility of ECM identification and induces protein loss. Here, we present a simple new method applicable to tissue fragments of 10 mg and more. The technique has been validated on human ovarian tissue and involves a standardized procedure for sample processing with an MS-compatible detergent and combined centrifugation. This two-step protocol eliminates the need for laborious sample clarification and divides our samples into 2 fractions, soluble and insoluble, successively enriched with matrisome-associated (ECM-interacting) and core matrisome (structural ECM) proteins.     

Use of coffee by‐products for the cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus and its impact on biological properties of extracts thereof

Incorporating spent coffee grounds (SCGs), a by‐product from coffee brewing, in growth substrate of beneficial edible mushrooms is an approach that has to be further studied due to its potential positive outcomes: environmental impact mitigation, production costs reduction and beneficial impact on consumer health. Hence, cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus was tested using SCG which enabled maximum production yield of P. citrinopileatus which was of 25.1% (w/w). Variable antidiabetic potential was observed between aqueous and enzymatic extracts (3.8%–29% inhibition) regardless species and substrates, whereas aqueous extract of P. citrinopileatus grown in substrate without SCG stood out presenting the highest antioxidant activity and inhibition activity of angiotensin I‐converting enzyme (IC₅₀ = 123 μg mL^?1). Ethanolic and aqueous extracts of both Pleurotus species grown in the presence or absence of SGC proved to be an interesting prebiotic source for growth of Bifidobacterium animalis Bo in comparison with fructooligosaccharides (FOS).     

Methodology for Estimating Streamflow by Water Balance and Rating Curve Methods Based on Logistic Regression

Both water balance (WB) and rating curve (RC) are methods for estimating streamflow. The first is mostly used to estimate reservoir outflows, while the second is usually adopted in hydrometeorological network streamflow gauges. While WB uses hourly collected data, the RC estimates streamflow using current water level and extrapolation techniques. The objective of this study was to analyze variations in the reservoir’s hourly outflow at Queimado Hydroelectric Power Plant (HPP Queimado) and to propose a method to evaluate whether the estimate of the daily outflows, obtained by the WB method, is similar to the flow values obtained at a conventional station. The logistic regression (LR) model was used because it is a method that adopts binary, categorically dependent variables to identify the event of interest. The results showed that the values of streamflow, obtained from an average of two daily readings, were a good representation of the flows in the region. The LR was able to identify atypical data, especially in the rainy season. This means that data consistency analysis can be faster and safer, when adequately employed and considering the proposed conditions, contributing to both management policies and the management of water resources.

     

The status and perspectives of nanostructured materials and fabrication processes for wearable piezoresistive sensors

Microsystem Technologies - The wearable sensors have attracted a growing interest in different markets, including health, fitness, gaming, and entertainment, due to their outstanding...     

Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.     

Low-cost deployment proposal to urban mobility in smart cities

Rational use of cars in smart cities can represent an economical and cheaper way to decrease the quantity of cars on the roads to better the life quality of the populations. This paper presents a low-cost deployment proposal called “URCa project” to reach these goals and proposes a paradigm change by sharing the cars considering some logistic aspects including car ride mechanism. Technical feasibility to deploy this solution was checked by means of a proof of concept. The concept was proven by passenger counting and license plate that are essential information in this solution were obtained taking photographs, applying two types of recognition algorithms and sending the results to be stored and evaluated by analytic data processes of a transit regulatory agency showing that this project is technically viable. The low-cost solution was justified by a financial analysis based on both costs (URCa solution and a bridge) that has shown a ratio of 1:10,000.

     

An experimental evaluation of cross-layer routing in a wireless mesh backbone

Over the latest few years, cross-layer design in wireless networks has drawn great attention from the research community. One of the main arguments in favor of such techniques is that the hop-count metric alone is not enough to capture the specificities of wireless links (e.g., interferences, collisions, fading). In this paper, we address a simple yet fundamental question: What are the real improvements that cross-layering can bring to routing performance when compared to the simple hop-count metric? In our experiments, we consider the backbone of a real wireless mesh network composed of 12 routers deployed in an office building. We focus on the stability of routes and their persistence. In spite of the nature of cross-layer metrics that take into account information from different layers, lets them be very reactive to changes, we observe that using these metrics, pairs of nodes tend to mainly use the same set of two or three routes between them.     

On the performance of heterogeneous MANETs

Recent decades have witnessed the birth of major applications of wireless communication technology, further supported by the increasing capabilities of portable devices, low cost and ubiquitous presence. Despite radio technology diversity, a great deal of existing research focuses on a single and isolated wireless technology at a time, where homogeneous elements are identified by IP addresses. This work presents a heterogeneous technology routing (HTR) Framework, targeted towards scenarios where the heterogeneity of devices and networking technologies is present. Our contribution is many fold. It consists of a framework, which encompasses a process for bootstrapping networks, a routing protocol capable of dealing with multiple network interfaces, and a tuning with multipath extensions. We evaluate the performance of the bootstrap, routing and multipath mechanisms by way of simulation and an actual testbed implementation. The multipath evaluation simulates HTR networks with WiMAX, 3GPP LTE and Wi-Fi support. Results show that our proposal can effectively improve the data delivery ratio for ad-hoc networks and that it reduces the end-to-end delay without major impact on network energy consumption. As part of HTR tuning, we investigate next the impacts of tuning the HELLO refresh interval timer on route convergence and its subsequent energy consumption reduction during this phase. We also compare our tuned HTR with the widely used optimized link state routing protocol. Results show that varying the HELLO refresh interval can improve the convergence time and reduce the energy consumption without major impact on network behavior. Our proposal also includes a new distributed address allocation algorithm, namely, the dynamic node configuration protocol (DNCP). This paper conducts a comparative analysis between the Prime, Prophet and the DNCP schemes using static and dynamic topologies in terms of network setup time, energy consumption and control message overhead. Results show that the DNCP had a lower battery power consumption and less control message overhead while it slightly suffers with regard to setup.

     

Ultrastructure of dermal denticles in sharpnose shark (Rhizoprionodon lalandii) (Elasmobranchii,Carcharhinidae)

The presence of denticles in the external surface, oral cavity, fins, and clasper of Elasmobranchii has been widely reported. These structures, called body denticles, may be observed on the body surface of sharks. Dermal and oral denticles are made up by a basal plate that is embedded in the dermis, forming a peduncle that grows from the base to the crown. These denticles may protect the skin against abrasion, and improve hydrodynamics and gill arches function. Rhizoprionodon lalandii is a widely distributed and very common species in Brazilian coastal areas. The aims of this study was to compare the morphology of oral and body denticles of R. lalandii to understand the implications of these structures in the behavior of these animals. Morphological analysis showed that there are differences between dermal and oral denticles, which are related to their role in different body regions. Body denticles have three cusps, and well‐defined crests and ridges, and literature data suggest that suggest that hydrodynamics is their main function. Most of the oral denticles have only one cusp, and their morphology and distribution showed that their main functions are preparing food to be swallowed and protecting the oral cavity against abrasion. Microsc. Res. Tech. 78:859–864, 2015. © 2015 Wiley Periodicals, Inc.