Electrical conduction in plasma polymerized thin films of γ‐terpinene

Plasma polymerized γ‐terpinene (pp?GT) thin films are fabricated using RF plasma polymerization. MIM structures are fabricated and using the capacitive structures dielectric properties of the material is studied. The dielectric constant values are found to be in good agreement with those determined from ellipsometric data. At a frequency of 100 kHz, the dielectric constant varies with RF deposition power, from 3.69 (10 W) to 3.24 (75 W). The current density–voltage (J?V) characteristics of pp–GT thin films are investigated as a function of RF deposition power at room temperature to determine the resistivity and DC conduction mechanism of the films. At higher applied voltage region, Schottky conduction is the dominant DC conduction mechanism. The capacitance and the loss tangent are found to be frequency dependent. The conductivity of the pp?GT thin films is found to decrease from 1.39 × 10^?12 S/cm (10 W) to 1.02 × 10^?13 S/cm (75 W) and attributed to the change in the chemical composition and structure of the polymer. The breakdown field for pp–GT thin films increases from 1.48 MV/cm (10 W) to 2 MV/cm (75 W). A single broad relaxation peak is observed indicating the contribution of multiple relaxations to the dielectric response for temperature dependent J?V. The distribution of these relaxation times is determined through regularization methods. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42318.     

Revisiting tetranitrophenolsulfonephthalein

Among the vast series of phenolsulfonephthalein dyes, the nitro derivatives and especially 3,3′,5,5′‐tetranitrophenolsulfonephthalein (nitrophenol crimson) remain practically unexplored, whereas the halogen and alkyl derivatives have been studied comprehensively. This striking difference is probably due to the enormous influence of the four NO₂ groups on the properties of the dye. As a result, the protolytic behaviour is unlike even that of tetrabromo phenolsulfonephthalein, and the recognised scheme of acid–base and tautomeric equilibrium of the sulfonephthaleins is unable to explain it. The molecular form H₂R was isolated as a sultonic tautomer, and an X‐ray crystal structure analysis was carried out. Our studies of the UV‐vis absorption spectra in water, methanol, dimethyl sulfoxide, acetonitrile, acetone, and dichloromethane, as well as in aqueous micellar solutions of surfactants, allowed us to evaluate the true molar absorptivity of the dianion R^2?, and to elucidate the enormous tendency to form yellow trianionic carbinol ROH^3?, even in the presence of traces of H₂O. Nuclear magnetic resonance and electrospray data confirm the proposed scheme of ionisation and tautomerism of nitrophenol crimson.     

Chemical reactions in spherically symmetric problems of mechanochemistry

A stress-assisted chemical reaction front propagation in a linear elastic solid is considered. The reaction between gas and solid constituents is sustained by the diffusion of the gas through the transformed material. The consideration is based on the kinetic equation in a form of the dependence of the reaction front velocity on the normal component of the chemical affinity tensor that in turn depends on stresses and gas concentration. Spherically symmetric problems of mechanochemistry are solved for the reaction front propagation in a sphere, in a body with a spherical hole and in an inclusion placed into an infinite medium. It is demonstrated how stresses can enhance, retard and even lock the reaction. The effects of the sign and value of the reaction front curvature are also examined.     

Resource potential for wind-hydrogen power in Ukraine

The paper provides an assessment of the current wind energy potential in Ukraine, and discusses developmental prospects for wind-hydrogen power generation in the country. Hydrogen utilization is a highly promising option for Ukraine's energy system, environment, and business. In Ukraine, an optimal way towards clean zero-carbon energy production is through the development of the wind-hydrogen sector. In order to make it possible, the energy potential of industrial hydrogen production and use has to be studied thoroughly.Ukraine possesses huge resources for wind energy supply. At the beginning of 2020, the total installed capacity of Ukrainian wind farms was 1.17 GW. Wind power generation in Ukraine has significant advantages in comparison to the use of traditional sources such as thermal and nuclear energy.In this work, an assessment of the wind resource potential in Ukraine is made via the geographical approach suggested by the authors, and according to the «Methodical guidelines for the assessment of average annual power generation by a wind turbine based on the long-term wind speed observation data». The paper analyses the long-term dynamics of average annual wind speed at 40 Ukrainian weather stations that provide valid data. The parameter for the vertical wind profile model is calculated based on the data reanalysis for 10 m and 50 m altitudes. The capacity factor (CF) for modern wind turbine generators is determined. The CF spatial distribution for an average 3 MW wind turbine and the power generation potential for the wind power plants across the territory of Ukraine are mapped.Based on the wind energy potential assessment, the equivalent possible production of water electrolysis-derived green hydrogen is estimated. The potential average annual production of green hydrogen across the territory of Ukraine is mapped.It is concluded that Ukraine can potentially establish wind power plants with a total capacity of 688 GW on its territory. The average annual electricity production of this system is supposed to reach up to 2174 bln kWh. Thus, it can provide an average annual production of 483 billion Nm³ (43 million tons) of green hydrogen by electrolysis. The social efficiency of investments in wind-hydrogen electricity is presented.     

Noise Effect on Ice Surface Softening During Friction

The ice surface softening by friction is investigated considering the additive non-correlated fluctuations of the shear strain and stress, and the temperature. The premelting is construed by the Kelvin–Voigt equation for shear strain and by the relaxation equations of Landau–Khalatnikov type for shear stress and temperature. Taking into account the noises in these equations, the Langevin and Fokker–Planck equations are derived. Their analysis is based on the investigation of extrema of the distribution function, i.e., steady-state values of the shear strain using the Stratonovich interpretation. The phase diagrams are constructed, where the noises intensities and thermostat temperature determine the regions of ice, softened ice and their mixture (stick–slip rubbing). We present that domain of ice friction is bounded by relatively small background sliding block temperatures and fluctuation intensities of the stress and temperature. The ice film softens with growth of the stress noise intensity even at small thermostat temperatures. The friction force time series for all rubbing modes are calculated and compared with experimentally observed ones.     

On a neutron detector based on TlInSe<Subscript>2</Subscript> crystals intercalated with a lithium isotope

The possibility of increasing the sensitivity of a neutron detector based on a TlInSe₂ crystal by introducing the ⁶Li isotope into this crystal is investigated. Introduction of the isotope is conducted by the method of electrochemical intercalation from aqueous and nonaqueous solutions of LiCl and also from the melt of the LiCl–KCl eutectic. It is shown that intercalation by the electrochemical method from a LiCl solution in propylene carbonate, performed along the “c” axis of the crystal (along strong bond chains) is efficient. The attained concentration of introduced lithium amounts to (1–1.2) × 10²¹ cm^–3, which increased the sensitivity of the detector by approximately four times. Good agreement between the calculated and experimental values of the detector sensitivity is demonstrated.     

Wear resistance of coatings manufactured by electric spark plating with Al-Sn electrodes

The effect of the anomalously high wear of the quenched steel counterbody was found during the testing of coatings manufactured by electric spark plating (ESP) with an AlSn alloy (20 wt % Sn). The presence of SnO₂ nanofibers in the coating composition, which are formed during the ESP with an electrode tool made of this alloy, is assumed to be the main reason for the above effect.     

Laser spark propagation along the beam in stationary gases at low pressures

A study of space-time evolution of the laser spark induced with the Nd: YAG laser in stationary gases at low pressures has been realized with the aid of high-speed photography. A mechanism to explain light propagation along the beam is proposed. Calculated data are in a good agreement with the experimental ones. The article was translated by the authors.     

Design-theoretical study of cascade CO2 sub-critical mechanical compression/butane ejector cooling cycle

In this paper an innovative micro-trigeneration system composed of a cogeneration system and a cascade refrigeration cycle is proposed. The cogeneration system is a combined heat and power system for electricity generation and heat production. The cascade refrigeration cycle is the combination of a CO₂ mechanical compression refrigerating machine (MCRM), powered by generated electricity, and an ejector cooling machine (ECM), driven by waste heat and using refrigerant R600. Effect of the cycle operating conditions on ejector and ejector cycle performances is studied. Optimal geometry of the ejector and performance characteristics of ECM are determined at wide range of the operating conditions. The paper also describes a theoretical analysis of the CO₂ sub-critical cycle and shows the effect of the MCRM evaporating temperature on the cascade system performance. The obtained data provide necessary information to design a small-scale cascade system with cooling capacity of 10 kW for application in micro-trigeneration systems.