Resource potential for wind-hydrogen power in Ukraine

The paper provides an assessment of the current wind energy potential in Ukraine, and discusses developmental prospects for wind-hydrogen power generation in the country. Hydrogen utilization is a highly promising option for Ukraine's energy system, environment, and business. In Ukraine, an optimal way towards clean zero-carbon energy production is through the development of the wind-hydrogen sector. In order to make it possible, the energy potential of industrial hydrogen production and use has to be studied thoroughly.Ukraine possesses huge resources for wind energy supply. At the beginning of 2020, the total installed capacity of Ukrainian wind farms was 1.17 GW. Wind power generation in Ukraine has significant advantages in comparison to the use of traditional sources such as thermal and nuclear energy.In this work, an assessment of the wind resource potential in Ukraine is made via the geographical approach suggested by the authors, and according to the «Methodical guidelines for the assessment of average annual power generation by a wind turbine based on the long-term wind speed observation data». The paper analyses the long-term dynamics of average annual wind speed at 40 Ukrainian weather stations that provide valid data. The parameter for the vertical wind profile model is calculated based on the data reanalysis for 10 m and 50 m altitudes. The capacity factor (CF) for modern wind turbine generators is determined. The CF spatial distribution for an average 3 MW wind turbine and the power generation potential for the wind power plants across the territory of Ukraine are mapped.Based on the wind energy potential assessment, the equivalent possible production of water electrolysis-derived green hydrogen is estimated. The potential average annual production of green hydrogen across the territory of Ukraine is mapped.It is concluded that Ukraine can potentially establish wind power plants with a total capacity of 688 GW on its territory. The average annual electricity production of this system is supposed to reach up to 2174 bln kWh. Thus, it can provide an average annual production of 483 billion Nm³ (43 million tons) of green hydrogen by electrolysis. The social efficiency of investments in wind-hydrogen electricity is presented.     

Pseudospectral method for assessing stability robustness for linear time-periodic delayed dynamical systems

The article presents a pseudospectral approach to assess the stability robustness of linear time-periodic delay systems, where periodic functions potentially present discontinuities and the delays may also periodically vary in time. The considered systems are subject to linear real-valued time-periodic uncertainties affecting the coefficient matrices, and the presented method is able to fully exploit structure and potential interdependencies among the uncertainties. The assessment of robustness relies on the computation of the pseudospectral radius of the monodromy operator, namely, the largest Floquet multiplier that the system can attain within a given range of perturbations. Instrumental to the adopted novel approach, a solver for the computation of Floquet multipliers is introduced, which results into the solution of a generalized eigenvalue problem which is linear w.r.t. (samples of) the original system matrices. We provide numerical simulations for popular applications modeled by time-periodic delay systems, such as the inverted pendulum subject to an act-and-wait controller, a single-degree-of-freedom milling model and a turning operation with spindle speed variation.     

Reactive,nonreactive, and flash spark plasma sintering of Al2O3/SiC composites—A comparative study

The influence of different SPS-based methods, that is, conventional spark plasma sintering (SPS), flash SPS (FSPS), and reactive SPS (RSPS) on the properties of Al₂O₃/SiC composite was investigated. It was shown that the application of preliminary high energy ball milling of the powders significantly enhances the sinterability of the ceramics. It was also demonstrated that FSPS provides unique conditions for rapid, that is, less than a minute, consolidation of refractory ceramics. The Al₂O₃-20 wt% SiC composite produced by FSPS possesses the highest relative density (~99%), fracture toughness (7.5 MPa m^1/2), hardness (20.3 GPa) and wear resistance among all ceramics produced by other SPS-based approaches with dwelling time 10 minutes. The RSPS ceramics hold the highest Young's modulus (390 GPa). Substitution of micron-sized Al₂O₃ particles by nano alumina does not lead to measurable enhancement of the mechanical properties.     

Convective heat transfer combined with surface radiation in a rotating square cavity with a local heater

The effect of surface radiation on laminar natural convection in a rotating cavity with a discrete heater has been analyzed numerically. The enclosure is insulated at the bottom and top, heated by a constant temperature from the discrete heater located on the bottom wall, and cooled by a constant temperature from the side walls. Governing equations with corresponding initial and boundary conditions formulated in dimensionless stream function, vorticity, and temperature have been solved by finite difference method of the second-order accuracy. The effects of surface emissivity, Rayleigh number, and Taylor number on the fluid flow and heat transfer have been studied. Obtained results have revealed that rotation can be a very good control parameter for heat transfer and fluid flow.     

Application of A4F-MALS for the Characterization of Polymers Prepared by Emulsion Polymerization: Comparison of the Molecular Structure of Styrene-Acrylate and Methyl Methacrylate-Acrylate Copolymers

In this paper, organic asymmetric flow field flow fractionation coupled to a multi-angle light scattering detector is presented as a very efficient tool for the characterization of copolymers prepared by emulsion polymerization. The molar mass distribution and the extent of branching of styrene–acrylate copolymers have been compared with corresponding copolymers of methyl methacrylate. It has been found that the presence of acrylate monomer results in the increase of molar mass and formation of branched macromolecules due to intermolecular chain transfer to polymer similarly as in case of methyl methacrylate–acrylate copolymers. However, the effect is far less pronounced.     

The method of cells and the mechanical properties of textile composites

The method of cells has been gaining ground as a method for predicting the elastic properties of textile reinforced composite materials. This method deals away with the constant stress/strain assumption present in most analytical models allowing for a more accurate prediction of the elastic properties, with computational cost only a fraction in comparison with finite element analysis. A new implementation is presented here, which links this method to a mechanistic predictive geometry preprocessor allowing the presented model to deal with 2D and 3D textile reinforced composites. Numerical results for prediction of stiffness and strength of textile composites are generated and compared to other methods.     

A model for the compression of a random assembly of carbon nanotubes

A model for calculation of the compression resistance of a random assembly of carbon nanotubes (CNTs) is proposed. The model is based on the theory of geometry and compression of fibrous materials with randomly oriented fibres. It accounts for the orientation distribution and volume fraction of CNTs in the assembly, the bending rigidity of a CNT and its decrease after onset of buckling and for friction and slippage between CNTs. The model also allows for calculation the number of contacts between CNTs in the assembly and of the percolation threshold. The predicted compression resistance is compared with experimental data on compression of “buckydisks” made of CNTs.