Variability in rheology of cemented paste backfill with hydration age,binder and superplasticizer dosages

The use of (CPB) material to ameliorate geotechnical stability of underground mine is in nascent stage in India. Rheological properties of CPB change with travelling time as it is transported to underground mine stope through pipeline reticulation. In this paper, rheological properties of CPB based on mill tailings of a carbonate rich mineral processing waste are evaluated for different dosages of polycarboxylate (PC) based (SP). Each CPB sample having 78?wt% solids is mixed separately with 4%, 6% or 8% of binder dosages (ratio of the weight of dry binder to the weight of dry tailings) and, 0%, 0.5%, or 1.0% of SP dosages as weight of dry binder. The paper presents a methodology for determining yield stress, plastic viscosity and thixotropic behaviour of CPB mixture as a function of hydration age, binder and SP dosages. Results from the experimental campaigns indicate that SP content has significant influence on rheological behaviour of CPB and can be suitably exploited to enhance the flow characteristics of the carbonate rich process tailings. The study also develops multivariate linear regression models of yield stress, plastic viscosity and thixotropy of CPB depending on the hydration age, binder and SP dosages.     

Experimental investigation on the effect of MgO and TiO2 nanoparticles in stepped solar still

This work aims at augmenting the amount of potable water using MgO and TiO₂ in stepped solar still. Experiments were carried out for the climatic conditions of Chennai, India, with two different concentrations of nanofluids inside a stepped basin under three different cases. Results show that there is an improvement in yield of fresh water from stepped solar still by 33.18% and 41.05% using 0.1% and 0.2% volume concentration of TiO₂ nanofluid, respectively, whereas the freshwater yield from stepped still with MgO nanofluids improved by 51.7% and 61.89%. Furthermore, the economic analysis revealed that the cost of potable water from the modified solar still reduced from 0.029 to 0.016 $/kg. Similarly, the useful annual energy, yearly cost per kilogram, and annual cost per kilowatt hour are significantly profitable with the use of MgO nanofluid in the stepped basin and found as 512.46 kWh, 0.025 $/kg, and 0.026 $/kWh, respectively. It is also found that the cost of potable water from the modified still significantly increases as the amount of fresh water produced is decreased with increased fabrication cost of the solar still.     

Performance analysis of evacuated tubes coupled solar still with double basin solar still and solid fins

ABSTRACT

Experimental set up of double basin solar still with evacuated tubes has been fabricated by locally available materials and then carry out research work by use of solid fins. Here 2.5?cm constant depth of water maintained and 3?cm depth mild steel fins are used. Experimental results have been obtained during month of March and April 2018 during clear sky days. Month of March 2018 is chosen for experiments on double basin solar still with evacuated tubes only and April 2018 is chosen for experiments on double basin solar still with evacuated tubes and fins. After series of experiments, it has been found that, the fins increase 25% distillate output compared with alone double basin solar still with evacuated tubes. It also increases distillate output during sunshine hours as well as off-sunshine hours.     

Ag and O ion irradiation induced improvement in dielectric properties of the Ba(Co1/3Nb2/3)O3 thin films

We present the preliminary results of temperature and frequency dependent dielectric measurements on Ba(Co_1/3Nb_2/3)O₃ (BCN) thin films. These films were prepared on indium tin oxide (ITO) coated glass substrates by the pulse laser deposition (PLD) technique. It exhibits single-phase hexagonal symmetry. These films were irradiated with Ag¹⁵⁺ (200 MeV) and O⁷⁺ (100 MeV) beams at the fluence 1 × 10¹¹, 1 × 10¹², and 1 × 10¹³ ions/cm². On irradiating these films, its dielectric constant (?′) and dielectric loss (tan δ) parameters improve compared to un-irradiated film. Compared to O⁷⁺ irradiation induced point/cluster defects Ag¹⁵⁺ induced columnar defects are more effective in reducing/pinning trapped charges within grains. The present paper highlights the role of swift heavy ion irradiation in engineering the dielectric properties of conductive samples to enable them to be useful for microwave device applications.     

Water Affinity to Epitaxial Graphene: The Impact of Layer Thickness

The sensitivity to water vapour of one‐, two‐, and three‐layer epitaxial graphene (1, 2, and 3LG) is examined in this study. It is unambiguously shown that graphene's response to water, as measured by changes in work function and carrier density, is dependent on its thickness, with 1LG being the most sensitive to water adsorption and environmental concentration changes. This is furthermore substantiated by surface adhesion measurements, which bring evidence that 1LG is less hydrophobic than 2LG. Yet, surprisingly, it is found that other contaminants commonly present in ambient air have a greater impact on graphene response than water vapor alone. This study indicates that graphene sensor design and calibration to minimize or discriminate the effect of the ambient, in which it is intended to operate, are necessary to insure the desired sensitivity and reliability of sensors. The present work will aid in developing models for realistic graphene sensors and establishing protocols for molecular sensor design and development.     

Variable friction pendulum system for seismic isolation of liquid storage tanks

Earthquake response of liquid storage steel tanks isolated with variable friction pendulum system (VFPS) is investigated under normal component of six recorded near-fault ground motions. The continuous liquid mass of the tank is modeled as lumped masses known as sloshing mass, impulsive mass and rigid mass. The corresponding stiffness constants associated with these lumped masses are worked out depending upon the properties of the tank wall and liquid mass. The governing equations of motion of the tanks isolated with variable friction pendulum system are derived and solved by Newmark's step-by-step method assuming linear variation of acceleration over small time interval. In order to verify the effectiveness of the VFPS in tanks, the seismic response of tanks isolated with VFPS is compared with that of the same tanks isolated using the conventional friction pendulum system (FPS). Furthermore, a parametric study is also carried out to critically examine the behaviour of tanks isolated with VFPS. The various important parameters considered are the tank aspect ratio, the isolation period and initial time period of the VFPS. In addition, the seismic response of tanks isolated with VFPS under trigonometric cycloidal pulses is also investigated. From these investigations, it is concluded that with the installation of VFPS in tanks, the seismic response of tanks during near-fault ground motions can be controlled within a desirable range. Finally, it is also observed that the response of tanks isolated with VFPS under the near-fault ground motions and trigonometric cycloidal pulses matches well only when the isolation period reaches high values.     

Modeling of transient natural convection heat transfer in electric ovens

Prediction of transient natural convection heat transfer in vented enclosures has multiple applications such as understanding of cooking environment in ovens and heat sink performance in electronic packaging industry. The thermal field within an oven has significant impact on quality of cooked food and reliable predictions are important for robust design and performance evaluation of an oven. The CFD modeling of electric oven involves three-dimensional, unsteady, natural convective flow-thermal field coupled with radiative heat transfer. However, numerical solution of natural convection in enclosures with openings at top and bottom (ovens) can often lead to non-physical solutions such as reverse flow at the top vent, partly a function of initialization and sometimes dependent on boundary conditions. In this paper, development of a physics based robust CFD methodology is discussed. This model has been developed with rigorous experimental support and transient validation of this model with experiments show less than 3% discrepancy for a bake cycle. There is greater challenge in simulating a broil cycle, where the fluid inside the cavity is stably stratified and is also highlighted. A comparative analyses of bake and broil cycle thermal fields inside the oven are also presented.     

Validation of the Applied Biosystems Prism 377 automated sequencer for the forensic short tandem repeat analysis

The Applied Biosystems (ABI) Prism 377 DNA sequencer has been evaluated in an attempt to increase the throughput of samples for short tandem repeat (STR) analysis, in both forensic casework and the UK National Criminal Intelligence DNA Database. The gel system assessed consisted of 0.2 mm, 4% acrylamide 6 M urea gels, with a well-to-read distance of 36 cm. Gels were run at a constant voltage of 3 kV and constant temperature of 51 degrees C. The run time of our second generation multiplex (SGM) STR system was achieved in less than 2 h. Rigorous validation has been performed on the instrument hardware and software. Complete resolution of 1 base differences was obtained, up to and beyond 350 bases; sizing precision across gels was more than 2-fold higher than the 373A and the sensitivity was increased by one third.