Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

First-principles investigation on the segregation of Pd at LaFe1-xPdxO3-y surfaces

First-principles calculations were performed to investigate the effect of Pd concentration and oxygen vacancies on the stability of Pd at LaFeO₃ surfaces. We found a much stronger tendency of Pd to segregate by taking the aggregation of Pd at LaFe_1-xPd_xO_3-y surfaces into consideration, resulting in a pair of Pd-Pd around a vacancy. Moreover, we predicted that one oxygen-vacancy-containing FeO₂-terminated surfaces would be stable at high temperatures by comparing the stability of LaFe_1-xPd_xO_3-y surfaces, which further supports our previous conclusion that a Pd-containing perovskite catalyst should be calcined at 1,073 K or higher temperatures in air to enhance the segregation of Pd in the vicinity of surfaces to rapidly transform the Pd catalyst from oxidized to reduced states on the perovskite support.     

Tiliroside, a glycosidic flavonoid, inhibits carbohydrate digestion and glucose absorption in the gastrointestinal tract

Scope Recent studies have reported that tiliroside, a glycosidic flavonoid, possesses anti‐diabetic activities. In the present study, we investigated the effects of tiliroside on carbohydrate digestion and absorption in the gastrointestinal tract. Methods and results This study showed that tiliroside inhibits pancreatic α‐amylase (IC₅₀ = 0.28 mM) in vitro. Tiliroside was found as a noncompetitive inhibitor of α‐amylase with K_i values of 84.2 μM. In male ICR mice, the increase in postprandial plasma glucose levels was significantly suppressed in the tiliroside‐administered group. Tiliroside treatment also suppressed hyperinsulinemia after starch administration. Tiliroside administration inhibited the increase of plasma glucose levels in an oral glucose tolerance test, but not in an intraperitoneal glucose tolerance test. In human intestinal Caco‐2 cells, the addition of tiliroside caused a significant dose‐dependent inhibition of glucose uptake. The inhibitory effects of both sodium‐dependent glucose transporter 1 (SGLT1) and glucose transporter 2 (GLUT2) inhibitors (phlorizin and phloretin, respectively) on glucose uptake were significantly inhibited in the presence of tiliroside, suggesting that tiliroside inhibited glucose uptake mediated by both SGLT1 and GLUT2. Conclusion These findings indicate that the anti‐diabetic effects of tiliroside are at least partially mediated through inhibitory effects on carbohydrate digestion and glucose uptake in the gastrointestinal tract.     

Burning velocities and kinetics of H2/NF3/N2, CH4/NF3/N2, and C3H8/NF3/N2 flames

The combustion characteristics and reaction mechanism of mixtures containing nitrogen trifluoride (NF₃) were investigated. Burning velocities for H₂/NF₃/N₂, CH₄/NF₃/N₂, and C₃H₈/NF₃/N₂ flames were determined for the first time at various equivalence ratios and N₂ mole fractions. The burning velocities of the latter two flames were similar and showed peaks at equivalence ratios of ∼1.0, while those of the H₂/NF₃/N₂ flames had the pronounced peak at low equivalence ratios where the formation of the wrinkled flames was observed. A detailed kinetic model was constructed to simulate the laminar burning velocities of H₂/NF₃/N₂ and CH₄/NF₃/N₂ flames. The model accurately reproduced the experimental results. Analyses of the reaction mechanism revealed the major reaction pathways that involve the decomposition of NF₃, the oxidation and chain-fluoridation of H₂ and CH₄, and the formation of N₂.     

The effect of material difference and flange nominal size on the sealing performance of new gasketless flanges

This paper deals with a new seal system between flange joints without using a gasket. This gasketless flange includes a groove and an annular lip that is machined in one of the flange rings which when removed being in contact with the other flange to form a seal line when the flanges are assembled. In this study, firstly, fundamental dimensions are examined for unplasticized polyvinyl chloride (PVC-U JIS) to obtain the best sealing performance. Then, the effects of material difference and flange nominal size upon the sealing performance of the new gasketless flange are investigated for two types of materials, 0.25% carbon steel (S25C JIS) and PVC-U. It is found that the critical internal pressure at which leakage appears is mainly controlled by the maximum stress at the annular lip for each material even if the flange nominal sizes are different. The gasketless flange made by PVC-U shows the higher critical internal pressure compared with the case of S25C if the same clamping forces are applied. The effect of stress relaxation for PVC-U on the sealing performance is also considered. Then, it may be concluded that this PVC-U gasketless flange as well as S25C has good sealing performance.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Microwave atomic force microscopy imaging for nanometer-scale electrical property characterization

We introduce a new type of microscopy which is capable of investigating surface topography and electrical property of conductive and dielectric materials simultaneously on a nanometer scale. The microwave atomic force microscopy is a combination of the principles of the scanning probe microscope and the microwave-measurement technique. As a result, under the noncontact AFM working conditions, we successfully generated a microwave image of a 200-nm Au film coating on a glass wafer substrate with a spatial resolution of 120 nm and a measured voltage difference of 19.2 mV between the two materials.     

Kinetic parameters of the electrode reaction of chloropenta-amminecobalt(III) ions at a gold electrode

The cathodic reduction of chloropenta-amminecobalt(III) ions at active gold electrodes has been studied in 0.1 M HClO₄ + 0.1 M NaClO₄ by means of the potentiostatic method. Chloropentaamminecobalt(III) ions gave one irreversible reduction wave in the double layer potential region of gold electrodes. The kinetic parameters of the electrode reaction were measured at 5, 15, 25, 35 and 45°C, and the activation energy was calculated to be 19 kcal mol^?1 for the electron transfer process and 4.5 kcal mol^?1 for the diffusion process.     

Holographic polymer-dispersed liquid crystal memory for optically reconfigurable gate array using subwavelength grating mask

Holographic polymer-dispersed liquid crystal (HPDLC) memory formed by a subwavelength grating (SWG) mask is presented for new optical information processing. The SWG structure in a photomask is formed on the SiO(2) plate using the anisotropic reactive ion etching technique. The configuration contexts for optically reconfigurable gate arrays (ORGAs) are stored in the HPDLC memory by polarization modulation property based on the form birefringence of the SWG plate. The configuration context pattern in the HPDLC memory is reconstructed to write it for the ORGAs under parallel programmability.