Categorical observers for metamerism

A method is proposed to generate categorical colour observer functions (individual colour matching functions) for any field size based on the CIE 2006 system of physiological observer functions. The method combines proposed categorical observer techniques of Sarkar et al with a physiologically-based individual observer model of Asano et al and a clustering technique to produce the optimal set of categorical observers. The number of required categorical observers varies depending on an application with as many as 50 required to predict individual observers' matches when a laser projector is viewed. However, 10 categorical observers are sufficient to represent colour-normal populations for personalized colour imaging. The proposed and recommended categorical observers represent a robust and inclusive technique to examine and quantify observer metamerism in any application of colorimetry.     

Stabilization of Hydroxynitrile Lyases from Two Variants of Passion Fruit,Passiflora edulis Sims and Passiflora edulis Forma flavicarpa,by C-Terminal Truncation

Because the synthesis of chiral compounds generally requires a broad range of substrate specificity and stable enzymes, screening for better enzymes and/or improvement of enzyme properties through molecular approaches is necessary for sustainable industrial development. Herein, the discovery of unique hydroxynitrile lyases (HNLs) from two species of passion fruits, Passiflora edulis forma flavicarpa (yellow passion fruit, PeHNL-Ny) and Passiflora edulis Sims (purple passion fruit, PeHNL-Np), isolated and purified from passion fruit leaves is reported. These are the smallest HNLs (comprising 121 amino acids). Amino acid sequences of both enzymes are 99 % identical; there is a difference of one amino acid in a consensus sequence. PeHNL-Np has an Ala residue at position 107 and is nonglycosylated at Asn105. Because it was confirmed that natural and glycosylated PeHNL-Ny showed superior thermostability, pH stability, and organic tolerance to that of PeHNL-Np, it has been speculated that protein engineering around the only glycosylation site, Asn105, located at the C-terminal region of PeHNL-Ny, might contribute to the stabilization of PeHNL. Therefore, the focus is on improved stability of the nonglycosylated PeHNL by truncating its C-terminal region. The C-terminal-truncated PeHNLΔ₁₀₇ was obtained by truncating 15 amino acids from the C terminus followed by expression in Escherichia coli. PeHNLΔ₁₀₇ expressed in E. coli was not glycosylated, and showed improved thermostability, solvent stability, and reusability similar to that of the wild-type glycosylated form of PeHNL expressed in Pichia pastoris. These data reveal that the lack of the high-flexibility region at the C terminus of PeHNL might be a possible reason for improving the stability of PeHNL.     

The evaluation of the emotion by near-infrared spectroscopy

Our purpose is to develop the technology for evaluating emotion objectively from the oxygenated hemoglobin within a brain. Nowadays, Japan is an aging society. The elderly people who need care will increase from now on increasingly. In the case of the person requiring the care who lost the function to convey an intention especially, the objective judgment to a physical and mental pain is required. Persons requiring care will also increase in number with the increase in this population. We gave subject stimulus of a comfortable or an uncomfortable sound and measured concentration of the oxygenated hemoglobin of a frontal lobe part by near-infrared spectroscopy. Based on the experimental result, a comfortable state or an uncomfortable state was distinguished by concentration of the oxygenated hemoglobin using the bayesian network. As a result, we were able to estimate the subject’s psychological condition.     

Effect of rolling deformation on the structures and properties of multi‐walled carbon nanotube filled isotactic polypropylene

Isotactic polypropylene filled with various contents of multi‐walled carbon nanotubes (MWCNTs) were fabricated by the injection molding technique and then rolled at room temperature. The unrolled samples (URS) and rolled samples (RS) were characterized by X‐ray diffraction studies, scanning electron microscopy, mechanical and micromechanical tests and differential thermal analyses. Although the URS exhibit the lamellar α‐crystal with a*‐axis orientation, the RS show the same crystals with both a*‐ and c‐axis orientation, which is explained by interlamellar and intralamellar slips and lamellar destruction. Scanning electron micrographs display distinct surface morphological features for both URS and RS. While the tensile strength of RS is higher than that of URS, the Young's modulus (Y) is found to be lower than that of URS. Anisotropy in microharness (H) parallel and perpendicular to the rolled direction has been detected, although H for both samples increases with increasing MWCNT contents. The average relationship H/Y ≈ 0.18 as estimated for URS is closer to the predicted value of 0.10 for polymers than the H/Y ≈ 0.22 obtained for RS. The lamellar thickness for URS increases with increase of MWCNT content and that for RS decreases, as evaluated from both differential thermal analyses and X‐ray diffraction data. Copyright © 2011 Society of Chemical Industry     

Polyphenols Extracted from Black Tea (Camellia sinensis) Residue by Hot‐Compressed Water and Their Inhibitory Effect on Pancreatic Lipase in vitro

Abstract: Polyphenols, retained in black tea wastes following the commercial production of tea beverages, represent an underutilized resource. The purpose of this study was to investigate the potential use of hot‐compressed water (HCW) for the extraction of pancreatic lipase‐inhibiting polyphenols from black tea residues. Black tea residues were treated with HCW at 10 °C intervals, from 100 to 200 °C. The resulting extracts were analyzed using high‐performance liquid chromatography‐mass spectrometry and assayed to determine their inhibitory effect on pancreatic lipase activity in vitro. Four theaflavins (TF), 5 catechins, 2 quercetin glycosides, quinic acid, gallic acid, and caffeine were identified. The total polyphenol content of extracts increased with increasing temperature but lipase inhibitors (TF, theaflavin 3‐O‐gallate, theaflavin 3′‐O‐gallate, theaflavin 3,3′‐O‐gallate, epigallocatechin gallate, and epicatechin gallate) decreased over 150 °C. All extracts inhibited pancreatic lipase but extracts obtained at 100 to 140 °C showed the greatest lipase inhibition (IC₅₀s of 0.9 to 1.3 μg/mL), consistent with the optimal extraction of TFs and catechins except catechin by HCW between 130 and 150 °C. HCW can be used to extract pancreatic lipase‐inhibiting polyphenols from black tea waste. These extracts have potential uses, as dietary supplements and medications, for the prevention and treatment of obesity. Practical Application: Active forms of lipase inhibitors can be recovered from black tea residues. They could be used as dietary supplements or medications.     

Thermal conductivity and mechanical properties of pitch-based carbon fibre reinforced aluminium composites fabricated by squeeze casting

Pure aluminium and high-silicon aluminium alloy were reinforced with the discontinuous pitch-based carbon fibres by squeeze casting, then the thermal conductivity and the mechanical properties of the composites were investigated. Optical microscopy revealed that the fibres were in a random planar arrangement, and the transmission electron microscopy revealed that there is no interfacial reaction between the matrices and the fibres. The random planar arrangement of the fibres leads to the anisotropy of the composite. The fibre-reinforcement increased the thermal conductivity in the parallel direction for both pure aluminium and its alloy matrices, while the thermal conductivity decreased in the vertical direction. The increase in the elastic modulus by the reinforcement was not observed for both matrices. The proof stress of the pure aluminium increased by the reinforcement especially in the parallel direction, while that of the high-silicon alloy decreased by the reinforcement.     

Preparation of Alumina Fiber-Reinforced Aluminum by Squeeze Casting and Their Machinability

Alumina fiber-reinforced aluminum alloy composites were prepared by squeeze casting, and the effect of the reinforcement on the machinability of the alloy was investigated. Two kinds of short alumina fibers, which have the same fiber size but different hardness, were used. Preform in which the fibers were in a random arrangement was formed with SiO₂ binder, and then was infiltrated with the alloy melt to prepare the composite. The fiber–matrix interfacial bond via the binder is sufficient and no reaction product was detected. The cutting force of the alloy was reduced by the fiber-reinforcement. The lower the hardness of the fiber in the composite, the lower the cutting force of the composite. The roughness of the machined surface was drastically decreased by the reinforcement. Observation of the chip formed on the machined surface indicated that the fiber suppressed the formation of the built-up-edge, and this fact would lead to the reduction in the surface roughness by the reinforcement. The chips were shortened by the reinforcement. The difference in hardness of the alumina fiber hardly affected the roughness and the chip morphology. The hardness of the fiber has a strong effect to decrease the tool life.     

Fundamental welding R&D results for manufacturing vacuum vessel of JT-60SA

The real vacuum vessel (VV) manufacturing of JT-60SA has started since November 2009 at Toshiba. Prior to starting manufacturing, fundamental welding R&Ds had been performed by three stages. In the first stage, primary tests for screening welding method were performed. In the second stage, the trial welding for 1 m-long straight and curved double shell samples were conducted. The dependences of welding quality and distortion on the welding conditions, such as arc voltage and current, setting accuracy, welding sequence, and the shape of grooves were studied. In addition, welding condition with low heat input was explored. In the last stage, fabrication sequence was confirmed and established by the trial manufacturing of the 20° upper half mock-up [1]. This paper presents the R&D results obtained in the first and second stages.