The Emi2 Protein of Saccharomyces cerevisiae is a Hexokinase Expressed under Glucose Limitation

Hexokinases catalyze glucose phosphorylation at the first step in glycolysis in eukaryotes. In the budding yeast Saccharomyces cerevisiae , three enzymes for glucose phosphorylation have long been known: Hxk1, Hxk2, and Glk1. In this study, we focus on Emi2, a previously uncharacterized hexokinase-like protein of S. cerevisiae . Our data show that the recombinant Emi2 protein (rEmi2), expressed in Escherichia coli , possesses glucose-phosphorylating activity in the presence of ATP and Mg ²⁺ . It was also found that rEmi2 phosphorylates not only glucose but also fructose, mannose and glucosamine in vitro . In addition, we examined changes in the level of endogenous Emi2 protein in S. cerevisiae in the presence or absence of glucose and a non-fermentable carbon source. We found that the expression of Emi2 protein is tightly suppressed during proliferation in high glucose, while it is strongly upregulated in response to glucose limitation and the presence of a non-fermentable carbon source. Our data suggest that the expression of the endogenous Emi2 protein in S. cerevisiae is regulated under the control of Hxk2 in response to glucose availability in the environment.     

Floating-island TFT leakage caused by process step reduction

The leakage mechanism for a top-gate thin-film transistor (TFT) produced using the fewest process steps in the industry is analyzed in order to achieve a high-contrast liquid crystal display (LCD). Using a T-shaped TFT structure, the OFF and ON channel lengths are defined independently, so that the leakage can be reduced with no ON current decrease     

Preparation of γ-alumina thin membrane by sol-gel processing and its characterization by gas permeation

-alumina porous membranes without pinholes or cracks were prepared by the sol-gel process. The boehmite sol obtained from hydrolysation of aluminium isopropoxide was applied to the inner surface of a porous supporting tube by a dipping procedure. The effects of sol concentration and the repetition number of dipping-drying-firing procedure on the membrane performance were investigated by scanning electron microscopy, X-ray diffraction and the Brunauer-Emmett-Teller method in connection with the micro-structure of the membrane. Gas permeation measurements were also conducted. The gas permeation through the thin membranes is well explained by Knudsen's flow, indicating the pores are controlled finely and homogeneously.     

FORMATION AND FLOW OF GAS BUBBLES IN A PRESSURIZED BUBBLE COLUMN WITH A SINGLE ORIFICE OR NOZZLE GAS DISTRIBUTOR

The characteristics of gas bubbles in a 5 cm diameter bubble column equipped with a single orifice of 1,3 or 5 mm diameter were investigated under system pressure of 0.1-15 MPa. The formation of gas bubbles was strongly affected by the system pressure. Under high pressures a dispersed gas jet was formed at gas velocities where spherical gas bubbles would have been formed at atmospheric pressure. The critical gas velocity between the bubbling regime and the jetting regime was correlated with the liquid phase Weber number and the gas phase Reynolds number based on the gas velocity at the orifice. Bubble size and gas holdup in the main part of the bubble column were also affected by the bubble formation pattern at the distributor     

Tensile strength and morphological investigation of SiC-coated carbon fibers

SiC-coated film onto carbon fibers as a barrier of oxidation resistance and reaction between carbon fibers and metals was investigated. The chemical vapor deposition of silicon carbide onto carbon fibers was performed at various temperatures ranging from 700 to 1000°C using triisopropylsilane vapor carried by hydrogen gas. The strength of the SiC-coated carbon fibers was decreased due to deterioration of fibers and chemical attack of hydrogen on the surface of carbon fibers during the coating process. The oxidation and the thermal resistance of the SiC-coated carbon fibers compared to the uncoated carbon fibers were improved at temperature range of 600–800°C and 1000–1200°C, respectively. Morphological change by air oxidation at temperature range of 500–800‡C was also investigated for the SiC-coated and the uncoated carbon fibers, respectively. The SiC-coated film between carbon fiber and aluminum was sufficient as a barrier of reaction on carbon fiber reinforced aluminum at temperature of above 1000°C.     

DISPERSION OF GAS AND LIQUID IN BUBBLE COLUMNS OF HOMOGENEOUS BUBBLE FLOW REGIME

Mean gas holdup, lateral distribution of gas holdup and axial mixing of gas and liquid were measured in bubble columns of 12 and 19cm i.d. The lateral distribution of gas holdup was strongly dependent on the flow regimes in the column. The axial mixing of liquid in the homogeneous bubble flow regime was much smaller than that in the heterogeneous bubble flow regime, and was not expressed by existing correlations. The axial mixing of liquid in the homogeneous bubble flow and the intermediate flow regime was simulated with a flow model based on the lateral distribution of buoyancy force and the effective viscosity. The axial mixing of gas was larger than that of liquid.     

Ergonomics solution for crossing collisions based on field assessment of visual environment at urban intersections in Japan

This paper aims to assess quantitatively the actual visual environment of uncontrolled urban downtown intersections in Japan in relation to frequently occurring crossing collisions and to discuss the safety countermeasures for them. In Field Study 1 dealing with direct visibility, our ultra-wide-angle photograph analysis revealed that most of the right/left-ward visible range at 11 intersections were insufficient to check safety, and the quality of direct visibility was closely associated with causing crossing collisions. The countermeasures to reduce a blind area were determined to be a top priority. In Field Study 2 dealing with indirect visibility, more than half of the 25 traffic convex mirrors had marked shortcomings for preventive safety, and ergonomics guidelines ensuring indirect visibility were proposed for installing traffic convex mirrors. Low-cost/low-technology-oriented countermeasures are highly recommended to obtain clear/sufficient images of crucial information satisfying drivers' requirements on traffic convex mirrors in accordance with those ergonomics guidelines was highly recommended. Crossing collisions could be prevented by improvement of poor direct and indirect visibility.     

Current dependence of performance of TES microcalorimeters and characteristics of excess noise

We are developing transition edge sensor (TES) microcalorimeter arrays for future Japanese astronomy missions. Although 6.6 eV energy resolution for 5.9 keV and 74 μs decay time are achieved, our energy resolution was limited by the excess noise of unknown origin. The dominant noise showed 1/R dependence and it only appeared when the current through the TES, I, is larger than 10 μA. This is explained if we assume a constant voltage noise source with a level of 2(4kT_CR_n)^1/2. We also investigated the influence of I on the TES performance and found the TES sensitivity is reduced when the ratio of current to the critical current I/I_C is large. It can explain the reduction of observed when operated without a magnetic shield. We also found a strong correlation between I_C and or the baseline width. Thus, we conclude that I_C is an essential parameter for the TES performance.     

Photoelectronic displacement sensor with nanometre resolution

The design of an ultraprecision displacement sensor with sub-nanometre resolution is proposed for the use of ultraprecision technologies. The sensor is based on the highly sensitive detection of power change at a specific point in light reflected from an object surface when the surface is subject to a small displacement. The sensor consists of a single light source, the reflective object and reference surfaces, optical fibre bundles for tranmission of the illuminating and the reflected light, and the photodiode set-up. In operation, the object and the reference surfaces are illuminated by light transmitted through the optical fibre bundle from the single light source. The reflected light from both surfaces is then transmitted through the optical fibre bundle to two individual but equivalent photodiodes. By using a differential amplifier, the diodes give a highly sensitive displacement signal which is included in the total signal of the reflected light. The sensor proposed has some distinctive features in its performance, such as non-contact measurement, a high resolution of 0.5 nm, a wide working range of about 30 μm within 5% linearity, and the sufficient stability of 1 nm in 20 s for specific research purposes.