Repulsive Flux Pinning Force in NbTi/Nb Superconductor/Superconductor Multilayers

Flux pinning characteristics have been investigated for the Nb _x Ti_100-x /Nb(x = 65, 50 and 28) and Nb ₂₈ Ti ₇₂/Nb ₆₅ Ti ₃₅ superconductor(S)/superconductor(S^′) multilayers. The maximum of the pinning force F _{p⊥ max} perpendicular to the layer plane as a function of the structure modulation length λ has a peak in the quasi-two-dimensional region (λ～20 nm). The maximum. values of the F _{p⊥ max} versus λ curve are proportional to the difference of the GL coherence length (ξ _GL ) between the superconductive sublayers S and S^′. The results suggest that the large F _{p⊥ max} in the S/S^′ multilayer is caused by the repulsive pinning force due to Nb layers with larger ξ _GL .     

Development of co-continuous structure in liquid crystalline polyester

We investigated liquid crystallization of liquid crystalline polyester BB-5 during isothermal annealing by digital high-fidelity microscope and light scattering. A liquid crystalline spherical domain having a radius of micrometers appeared by annealing at around 180 °C. The domain grew dendritically in all directions. Neighboring liquid crystalline regions coalesced and then interconnected. The interconnected structure changed to a co-continuous two-phase structure with increasing ordering of the liquid crystalline phase, and the interface between the liquid crystalline phase and the isotropic phase became smoother over time. Liquid crystallization stopped before volume filling the whole space, and the liquid crystalline phase and isotropic phase coexisted. The liquid crystalline region became narrower with an increase in the temperature of the liquid crystallization. Such structural development is different from the liquid-liquid phase separation via spinodal decomposition, and it may be attributed to the segregation of non-liquid crystallizable low molecular weight molecules from the growth front by fractionation of the molecular weight distribution during the liquid crystallization in terms of the instability of the diffusion-controlled interface.     

Coating of hydroxyapatite on metal plates using thermal dissociation of calcium-EDTA chelate in phosphate solutions under hydrothermal conditions

Coating of hydroxyapatite on various metal plates was carried out by a homogeneous precipitation technique using hydrothermal reactions in Ca(edta)^2-–NaH₂PO₄ at 140–200°C and pH 3.4–10.0. Hydroxyapatite films were formed on the surface of the iron plates in solutions at an initial pH above 4.7, whereas aggregates consisting of needle-like hydroxyapatite crystal radiating from a point in the form of flower deposited as islands on the surface of aluminum, copper and titanium plates. The upper part of the film formed on the surface of the iron plates consisted of needle-like hydroxyapatite particles whereas the bottom of the film consisted of spherical hydroxyapatite particles. The length of the needle-like hydroxyapatite particles increased with decreasing concentration of Ca(edta)^2-.     

Modern interpretation on the high-stretching of natural rubber attained by the classic ‘racking’ method

To investigate the mechanism of high elongation of natural rubber attained by the ‘racking method’, a strip of smoked-sheet was elongated up to 150 times in length, by stretching rapidly at room temperature and forcing to shrink at 75-80 °C repeatedly. On X-ray diffraction, a typical fibre pattern with an amorphous ring appeared already at ×10 (stretch ratio=10). The degree of crystallinity increased to the level of 17-18% at ×20 and turned to decrease after ×60, but the degree of crystallite orientation reached at a high level already at ×10 and did not change significantly and the half-height width of reflection profiles stayed almost at a constant level, while the Young's modulus increased up to ca. 300 MPa at ×100 and then fell rather discontinuously. It was assumed that some fractions of chain segments between entanglements were gradually broken in each step of stretching operation, rather than disentangled and slipped.     

Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.     

Current collecting efficiency of micro tubular SOFCs

In this study, current collecting efficiency of the micro tubular solid oxide fuel cell (SOFC) was estimated to determine optimum size of the micro tubular SOFC. Two models for collecting current from single terminal (ST) and double terminal (DT) of anode tube were proposed and used to calculate the current collecting efficiency as functions of anode thickness, tube length and operating temperature. It was shown that design of the cell geometry and current correcting method are significantly important to achieve high performance micro tubular SOFC stacks. The efficiency loss estimated from the DT model was about 2–4-fold lower than those of obtained from the ST model. The DT model was shown to be more effective for higher operating temperature and the tube length.