高效液相色谱-串联质谱法测定双壳类水产品麻痹性贝类毒素

目的采用Supelco ENVI-Carb柱净化双壳类水产品中的麻痹性贝类毒素(PSP),建立高效液相色谱-串联质谱(HPLC-MS/MS)法检测双壳类水产品中的PSP,为水产品中的PSP检测提供方法依据。方法选用色谱柱TSK-GEL Amide-80(2.0 mm×250 mm,5μm),以2 mmol/L甲酸铵-50 mmol/L甲酸水和95%乙腈水(含2 mmol/L甲酸铵-50 mmol/L甲酸)为流动相,采用梯度洗脱进行分离。样品用1%乙酸溶液进行提取,上清液加入氨水后(pH=4.0)经Supelco ENVI-Carb柱净化,将洗脱液抽干收集,上机测定。多重反应监测(MRM)模式检测。结果PSP的线性范围为8.1~705.0μg/kg,检出限为10~35μg/kg,回收率在47.0%~91.3%之间。结论本方法提取效果好、基质效应小,适用于双壳类水产品中麻痹性贝类毒素的痕量检测。     

免疫亲和柱净化-高效液相色谱-三重四极杆质谱法测定双壳类水产中软骨藻酸

目的 采用免疫亲和柱净化双壳类水产中的软骨藻酸,建立高效液相色谱-三重四级杆质谱串联（LC-MS/MS）方法检测双壳类水产中的软骨藻酸,为水产品中的软骨毒素检测提供方法依据。方法 选用InfinityLab Poroshell 120 EC-C18色谱柱,以10 mmol/L甲酸铵-0.1%甲酸-甲醇为流动相,采用梯度洗脱进行分离。样品用80%甲醇水提取,上清液加入PBS缓冲液后经免疫亲和柱净化,将洗脱液氮吹至干定容后上机测定。多重态反应监测（MRM）方式检测。结果 软骨藻酸的线性范围为20.0~200 ng/ml,检出限为0.002 μg/g,回收率在75.2% ~ 85.7%之间。结论 本方法特异性强、提取效果好、无基质抑制效应,适用于双壳类水产中软骨藻酸的痕量检测。     

丝织物中酸性金黄G的液相色谱-质谱法测定

建立了固相萃取-超快速液相色谱-电喷雾串联三重四级质谱(SPE-UFLC-ESI-MS/MS)联用技术测定丝织物中的酸性金黄G。样品经SPE提取和净化后,采用ACQUITY UPLC BEH C18柱(100 mm×2.1 mm,1.7μm)色谱柱,乙腈(含0.1%甲酸)和水(含0.1%甲酸)为流动相进行梯度洗脱,电喷雾离子源电离,负离子多反应监测模式进行定性定量分析。酸性金黄G染料在0.5~100.0μg/L范围内线性良好,相关系数0.999 5,方法检出限为0.17μg/kg,回收率为97.2%~102.3%。     

液相色谱-串联质谱法测定豆类中左旋多巴

文章建立一种豆类中左旋多巴的液相色谱-串联质谱测定方法。样品经0.3 mol/L乙酸水溶液超声提取,Agilent Proshell 120 SB-C18(2.1 mm×150 mm,2.7μm)色谱柱分离,以0.1%甲酸水-甲醇为流动相进行梯度洗脱,多反应监测(MRM),内标法定量。结果表明,左旋多巴在0.1~5.0 mg/L范围内线性关系良好,相关系数为0.9994,检出限为1.5 mg/kg,定量限为5.2 mg/kg,方法的平均加标回收率为96.9%~105.5%,日内精密度和日间精密度均小于4%,具有操作简单、灵敏度高、准确度高、重现性好等特点,能够很好满足豆类中左旋多巴含量的检测需要。     

高效液相色谱-串联质谱法测定蜂王浆中红霉素及其代谢物

目的建立蜂王浆中红霉素A、红霉素A烯醇醚、脱水红霉素A和N-脱甲基红霉素A的高效液相色谱-串联质谱检测方法。方法以pH 6.0磷酸盐缓冲液为提取剂,经HLB小柱净化富集后,采用高效液相色谱-串联质谱仪分析。采用Agilent Polaris C18色谱柱(100 mm×2.0 mm,5μm),以甲醇和0.1%甲酸为流动相,质谱模式为电喷雾正离子监测。结果该方法前处理简单,线性范围为2.0~100μg/L,相关系数在0.99以上,四种化合物的检出限和定量限分别为0.5μg/kg和5.0μg/kg。方法采用内标法定量,回收率范围为70.0~118.1%,相对标准偏差小于10%。结论方法回收率稳定且重现性较好,能够满足日常检测工作的需要。     

HPLC法测定面制品中的姜黄色素

建立高效液相色谱法测定面制品中姜黄色素添加剂含量的方法,用甲醇∶水(7∶3,v/v)稀释并提取面饼样品中的三种姜黄素,采用Kinetex PFP五氟苯基柱(250 mm×4.6 mm,5μm)色谱柱,以0.1%甲酸水溶液和0.1%甲酸乙腈溶液为流动相,流速为1.0 m L/min,检测波长为420 nm,进样量为4μL。结果表明,三种姜黄素分别在1.0~100μg/m L范围内具有良好的线性关系,方法的定量限为10 mg/kg。实际样品检测发现,袋装方便面和咖喱味点心面的面饼中均检出姜黄素,总姜黄素含量均在50 mg/kg以内,符合GB 2760–2014的限量规定。     

超高效液相色谱-串联质谱法测定牛奶中23种兽药

建立超高效液相色谱-串联质谱测定牛奶中23种兽药残留的检测方法。用乙腈(含2%甲酸)提取牛奶样品中的目标化合物,经oasis PriMe HLB小柱净化后,氮气吹扫,用5%甲醇水溶液溶解残余物后分析。以水(含0.1%甲酸)-甲醇(含0.1%甲酸)为流动相,选择HSS T3色谱柱(2.1 mm×100 mm, 1.8μm)分离目标化合物,采用电喷雾电离串联三重四级杆质谱在多反应监测(MrM)模式下进行测定,外标法定量。23种兽药化合物的检出限为0.005～3.026μg/kg,定量限为0.1～10μg/kg,加标回收率为70.98%～118.63%,相对标准偏差为0.14%～11.55%,该方法简单快捷、准确可靠,可用于牛奶中23种兽药的检测。     

超高效液相色谱-串联质谱法同时检测鸡肉中氯霉素、四环素、金霉素和土霉素

采用固相萃取法对鸡肉中氯霉素、四环素、金霉素和土霉素残留同时提取、净化、富集,并建立了用超高效液相色谱-串联质谱法对4种抗生素定性定量检测的分析方法。前处理部分采用含0.1%三氯乙酸的乙腈为提取溶剂,饱和了乙腈的正己烷溶液去除脂肪,超声波萃取2次;采用HLB固相萃取柱净化;色谱部分采用BEH C_(18)色谱柱(2.1 mm×50 mm,1.7μm),乙腈-0.2%甲酸水(含5 mmol/L乙酸铵)为流动相进行梯度洗脱。在最优条件下氯霉素、四环素、金霉素和土霉素在相应浓度范围内,线性良好,相关系数R2均大于0.999,其检出限分别为0.1、3.2、16.0、9.0μg/kg,日内、日间相对标准偏差(n=5)分别小于5.0%和10.0%,平均回收率为80.1%~92.5%。     

液相色谱-串联质谱法测定鸡肉中磺胺及其增效剂残留量

建立鸡肉中122种磺胺及1种增效剂多残留检测的液相色谱-串联质谱法。样品经过甲酸-乙腈(1:199,V/V)溶液提取,正己烷脱脂,液-液分配净化后,C_(18)柱分离,甲醇、甲酸-水(体积分数0.1%)为流动相梯度洗脱,采用电喷雾电离源(electrospray ionization,ESI)正离子多反应检测(multiple reaction monitoring,MRM)模式检测,外标法定量。结果表明:药物在2.0~100.0μg/L质量浓度范围内线性关系良好,相关系数均大于0.99,方法的检出限和定量限分别为0.5μg/kg和2.0μg/kg,在添加量为2.0、5.0、10.0μg/kg时回收率为61.8%~88.3%,相对标准偏差小于11.3%。该方法简便快捷,可用于鸡肉中磺胺类药物及其增效剂的多残留检测。     

液相色谱-串联质谱法检测蜂蜜中15种喹诺酮类和17种磺胺类药物残留

目的建立同时测定蜂蜜中15种喹诺酮和17种磺胺类药物残留的液相色谱-串联质谱(liquid chromatography-tandem mass spectrometry,HPLC-MS/MS)检测方法。方法样品经过磷酸盐缓冲溶液(pH=8)提取,过HLB(hydrophile-lipophile balance)固相萃取柱净化。以CORTECS C18色谱柱(2.1 mm×100 mm,1.6μm)分离,以5 mmol乙酸铵、0.1%甲酸水(A)和0.1%甲酸-乙腈(B)作为流动相进行梯度洗脱。质谱分析以电喷雾为离子源(electrospray ionization,ESI+),采用多反应监测(multiple reaction monitoring,MRM)。结果本方法在15 min内完成32种目标化合物的分离。15种喹诺酮和17种磺胺类药物在1.0、5.0和10.0μg/kg添加水平的回收率为54.9%~122.5%,相对标准偏差(relative standard deviation,RSD)小于18.7%(n=6),方法检出限为0.4μg/kg,定量限为1.0μg/kg。结论该方法快速、准确、灵敏,适合测定蜂蜜中喹诺酮和磺胺类药物残留。     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

The Ministry of Environmental Protection Issued "Feasible Technology Guidelines for Pollution Prevention and Control in Wood Pulping Process of the Paper Industry (Trial)" and Two Other Guiding Technical Documents

On December 27t＂, 2013, the Ministry of Environmenta Protection announced that, in order to implement ＂The Environmental Protection Law of the People＇ s Republic of China＂, improve the working system in environmenta protection technologies, and promote technologica advancement in pollution prevention, the Ministry of Environmental Protection sponsored the formulation of three guiding technical documents including ＂Feasible Technology Guidelines for Pollution Prevention and Contro n Wood Pulping Process of the Paper Industry （Trial）＂     

1~(st) Intelli-Tissue~ EcoEc Tissue Machine Supplied by PMP Group Successfully Put into Operation in China

正On April 29th,2014,Intelli-Tissue EcoEc tissue machine supplied by PMP Group successfully put into operation at Hebei Xuesong Paper Co.,Ltd.,this is the first such kind of paper machine of PMP Group in China.