食源性单核细胞增生李斯特菌四环素、红霉素耐药基因研究

研究了食源性单核细胞增生李斯特菌四环素、红霉素耐药基因的分布状况及和耐药表型的关系。采用微量肉汤稀释法对2005~2007年河北省疾病预防控制中心分离到的食源性单核细胞增生李斯特菌株进行四环素、红霉素药敏实验;应用PCR方法对实验菌株进行四环素耐药基因tet(M)、tet(S)、tet(L)、tet(K)、tet(B)、及与tet(M)基因关系密切的转座子Tn916、红霉素核糖体甲基化酶基因ermB、ermC、及与ermB基因关系密切的转座子Tn917检测,对阳性样本序列进行鉴定分析;应用血清学分型、脉冲场凝胶电泳(PFGE)、及脂肪酸聚类分析方法分析四环素耐药菌株之间的相关性,确定基因型和多态性。结果表明,91株单核细胞增生李斯特菌四环素敏感77株、耐药14株;红霉素敏感89株、耐药2株,其中包含1株菌同时交叉耐药四环素和红霉素;14株四环素耐药株中含tet(M)基因的13株,在13株tet(M)基因阳性菌中,tet(M)位于Tn916转座子上的9株;1株同时交叉耐药四环素、红霉素菌同时携带tet(S)、ermB基因;ermC基因、转座子Tn917均为阴性;四环素、红霉素敏感株中未检测到上述任何耐药基因。14株四环素耐药菌株血清型分布以1/2a型为主(n=12),部分菌株PFGE、脂肪酸分型完全一致。食源性单核细胞增生李斯特菌获得tet(M)基因是耐四环素的主要机制之一,具有水平传播耐药基因能力的接合型转座子Tn916与该菌四环素耐药播散有直接关系;ermB基因介导的核糖体靶位点改变存在食源性单核细胞增生李斯特菌红霉素耐药株中;PFGE基因型结合脂肪酸聚类分析能够用来分析菌株之间的相关性。     

一株食源性多重耐药单核细胞增生李斯特菌的耐药性研究

本研究对食品样本中分离的一株多重耐药单核细胞增生李斯特菌进行耐药机制的探讨,以期对食源性单核细胞增生李斯特菌多重耐药现象的控制提供理论依据。本文通过聚合酶链式反应筛选耐药决定因子,质粒消除及自然转化实验对耐药决定因子进行定位及传播能力的探讨,最后通过传代实验验证该菌株多重耐药性传播的稳定性。结果表明,对检测到的多重耐药菌株LM78(耐受氯霉素、红霉素、链霉素、四环素、复方新诺明)进行相关耐药基因检测,检测到cat、erm B、tet S 3个耐药基因。质粒消除后MIC值下降到敏感范围,且该质粒可通过自然转化在不同菌属间传递,说明这些耐药基因存在于质粒上。该质粒在无抗生素选择压力下连续传代,仍具有较高稳定性。食源性致病菌多重耐药性有可能通过不同细菌种属间转移,进而由食物链向人类传播,对人类健康造成潜在的威胁。     

云南省牛乳中单核细胞增生李斯特氏菌的分布特征、耐药性及毒力研究

目的分析云南省牛乳中单核细胞增生李斯特氏菌(Listeria monocytogenes)的分布特征、耐药性及毒力现状。方法采集云南省主要奶产区牛乳样本,按照GB 4789.30—2016方法分离单核细胞增生李斯特氏菌疑似菌株,采用飞行时间质谱技术结合16SrDNA测序对疑似菌株进行鉴定;采用微量肉汤稀释法对分离菌株进行抗生素药敏实验;通过聚合酶链式反应(polymerasechainreaction,PCR)技术检测单核细胞增生李斯特氏菌中7种毒力基因的存在状况。结果158份样品共有4份检出单核细胞增生李斯特氏菌,检出率为2.53%;共分离获得8株菌。其中,生鲜乳中检出率为3.36%,巴氏杀菌乳中未检出。在生鲜乳中,荷斯坦牛乳、水牛乳、牦牛乳检出率分别为2.13%、0.00%和20.00%;标准化牛场、奶牛合作社和个体户的检出率分别为2.50%、1.51%和15.38%;手工挤奶和机械挤奶检出率为11.76%和1.96%。药敏实验结果显示8株菌均对青霉素耐药,对四环素、复方新诺明、红霉素耐药率分别为87.50%、75.00%和50.00%;多重耐药率为75.00%;但所有菌株对氨苄西林均敏感。8株菌对7种毒力基因的携带程度从12.50%~75.00%不等。结论云南省牛乳尤其生鲜乳中存在一定程度的单核细胞增生李斯特氏菌污染,且该菌具有普遍耐药性并携带一定程度的毒力基因,对消费者的安全具有潜在风险,应加强卫生监督管理。     

食源性单核细胞增生李斯特菌的重金属镉抗性及其与抗生素耐药性的关系研究

研究了不同血清型食源性单核细胞增生李斯特菌对重金属镉的抗性及其与抗生素耐药性之间的关系。采用琼脂稀释法检测单核细胞增生李斯特菌对重金属镉的抗性,与菌株的抗生素耐药性进行比较分析。结果表明,73株实验菌株中,36株具有镉抗性,总体镉抗性率达49.3%(36/73)。分离到的5株多重耐药单核细胞增生李斯特菌均为镉抗性菌株,表明食品生产、加工及其储存环境中这种同时携带多重耐药性与重金属抗性的微生物从食品链及有关环境进入到人类,就会对人类健康构成构成潜在威胁。     

中国食源性单核细胞增生李斯特菌耐药特征分析

目的研究中国22个省市自治区9类食品中分离的单核细胞增生李斯特菌的耐药特征。方法采用微量肉汤稀释法测定了1 069株单核细胞增生李斯特菌对庆大霉素、氨苄西林、青霉素、四环素、强力霉素、亚胺培南、红霉素、环丙沙星、左旋氧氟沙星、头孢噻吩、利福平、万古霉素、氯霉素、氨苄西林/舒巴坦酸和复方新诺明15种抗生素的耐药性。结果 1 069株单核细胞增生李斯特菌耐药率为6.92%,主要耐受的抗生素有四环素、强力霉素、红霉素、氯霉素和环丙沙星,并出现了多重耐药株。在不同食品来源中,分离自速冻米面制品的菌株耐药率最高,为9.64%。在22个省市自治区中,耐药率前3位的是:甘肃、吉林、福建,分别为27.3%、20.4%和17.4%。结论中国食源性单核细胞增生李斯特菌的耐药率较低,不同地区、不同食物来源耐药率差异较大,仍要加强对生产和临床使用抗生素的管理,减缓单核细胞增生李斯特菌耐药趋势的上升。     

食源性变形杆菌氨基糖苷类修饰酶基因及16S rRNA甲基化酶基因研究

目的了解食源性变形杆菌的氨基糖苷类耐药基因情况。方法收集2011—2014年石家庄市售各类食品中分离到的对阿米卡星和庆大霉素至少有一种耐药的变形杆菌124株,用PCR、测序和基因库在线比对方法分析6种氨基糖苷类修饰酶基因与3种16S r RNA甲基化酶基因。结果 124株变形杆菌中氨基糖苷类修饰酶耐药基因aac C2、aac A4、aad A1和aph A6的检出率分别为95.2%(118/124)、80.6%(100/124)、73.4%(91/124)和5.6%(7/124);16S r RNA甲基化酶耐药基因rmt B检出率为87.1%(108/124)。aac C1、aad B、arm A和rmt C基因均未检出。结论 aac C2型氨基糖苷类修饰酶基因与rmt B型16S r RNA甲基化酶基因流行是食源性变形杆菌对氨基糖苷类抗生素耐药的重要原因。     

2012—2015年北京市西城区单核细胞增生李斯特菌多位点序列分型及耐药研究

探讨单核细胞增生李斯特菌多位点序列分型(MLST)与耐药性的关联性,确定某些具有高致病性潜能的流行克隆株的存在。方法 采用Kirby-Bauer(K-B)纸片扩散法和E-test药敏试条法对14种抗生素进行药物敏感性试验,以MLST技术对50株菌株进行基因分型。结果 单核细胞增生李斯特菌耐药率为22.00%(11/50),并出现多重耐药株。50株单核细胞增生李斯特菌MLST分析共获得12个型别,以ST9和ST121为优势型别。结论 特定ST型别在食品生产过程中存在特定菌株之间的传递,人源性和食源性单核细胞增生李斯特菌中均发现耐药株,可能存在耐药基因的传递,应加强对具有潜在致病性的ST型别的监测力度。     

猪肉中单核细胞增生李斯特菌的分离与耐药性研究

了解猪肉中单核细胞增生李斯特菌的污染情况、血清型和耐药性现状。按照国标GB 4789.30-2010程序分离猪肉中单核细胞增生李斯特菌;多重PCR确定血清型;纸片扩散法检测单核细胞增生李斯特菌对抗生素的敏感性。研究结果表明273份猪肉样本中有52（19.02%)个受单核细胞增生李斯特菌的污染,共检出78株该致病菌。33株（42.31%）、24株（30.71%）、16株（20.51%）、3株（3.85%）、2株（2.56%)分别被确定为血清型1/2a（或3a）、1/2b（或3b或7）、1/2c（或3c）、4a（或4c）和4b（或4d或4e）。所有菌株对氨苄西林、 氨苄西林/舒巴坦、亚胺培能、环丙沙星、左氧氟沙星、万古霉素都敏感,对四环素（20.51%）的耐药率最为严重。11.54%的菌株对临床治疗李斯特菌病的青霉素、庆大霉素、红霉素等抗生素出现耐药。tet(M)基因是单核细胞增生李斯特菌耐四环素的主要机制之一,接合型转座子Tn916与该菌四环素耐药散播有直接关系。     

台州市食源性单核细胞增生李斯特菌分子特征研究

目的了解台州市食品中分离的单核细胞增生李斯特菌的血清型、毒力基因以及基因分型情况,建立食源性单核细胞增生李斯特菌的分子特征本底信息,为食源性疾病的防治提供技术支持。方法对近几年从食品中分离的37株单核细胞增生李斯特菌进行多重PCR血清分型、9种毒力基因(prf A、inl A、inl B、iap、fla A、hly A、plc B、mpl和act A)PCR检测、PFGE基因分型,用Bio Numerics 6.6软件对分型数据进行聚类分析。结果 37株食源性单核细胞增生李斯特菌的血清型以1/2a或3a型别为主;所有菌株均检出4种以上毒力基因,有15株菌携带所有9种毒力基因;37株菌经Apa I酶切PFGE分型后,共得到22种带型,每种带型包含1~5株不等,相似度区间为67%~100%。结论台州市食源性单核细胞增生李斯特菌存在致病流行风险,建立的指纹图谱数据库可为食源性疾病的防治提供技术支持。     

扬州市食品中7种食源性致病菌污染状况及耐药性研究

为确定易受污染的食品,研究食源性病原菌耐药性状,为制定HACCP控制食源性疾病提供科学依据,对扬州市食品中沙门菌、E.coliO157:H7、单核细胞增生李斯特菌、金黄色葡萄球菌、副溶血性弧菌、空肠弯曲菌和小肠结肠炎耶尔森菌污染状况进行分析。在957份食品中共检出沙门菌、单核细胞增生李斯特菌、金黄色葡萄球菌、副溶血性弧菌90株,检出率为9.40%。其中沙门菌检出率为2.09%,单核细胞增生李斯特菌检出率为4.49%,金黄色葡萄球菌检出率为2.72%,副溶血性弧菌检出率为0.10%,未检出E.coliO157:H7。在80件生肉类试样中检出空肠弯曲菌8株,小肠结肠炎耶尔森菌6株。对分离出的沙门菌、单核细胞增生李斯特菌、金黄色葡萄球菌进行药敏试验,结果表明3种致病菌对部分抗生素多重耐药。扬州市食品中主要危害因素为沙门菌、单核细胞增生李斯特菌、金黄色葡萄球菌及其对抗生素的多重耐药。食物链是病原菌耐药性产生的重要环节。加强生肉制品、散装熟食及生牛奶的卫生管理,控制动物饲料抗生素添加剂的使用并严格遵守休药期以防止耐药菌株的产生,对控制食源性疾病、保证食品安全具有很重要的意义。     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Chlorohydrins of bisphenol A diglycidyl ether (BADGE) and of bisphenol F diglycidyl ether (BFDGE) in canned foods and ready-to-drink coffees from the Japanese market

BADGE.2HCl and BFDGE.2HCl were determined in 28 samples of ready-to-drink canned coffee and 18 samples of canned vegetables (10 corn, 5 tomatoes and 3 others), all from the Japanese market. HPLC was used as the principal analytical method and GCMS for confirmation of relevant LC fractions. BADGE.2HCl was found to be present in one canned coffee and five samples of corn, BFDGE.2HCl in four samples of canned tomatoes and in one canned corn. No sample was found which exceeded the 1mg/kg limit of the EU for the BADGE chlorohydrins. However the highest concentration was found for the sum of BFDGE.2HCl and BFDGE.HCl.H₂O at a level of 1.5mg/kg. A Beilstein test confirmed that all cans containing foods contaminated with BADGE.2HCl or BFDGE.2HCl had at lest one part coated with a PVC organosol.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

European priorities for research to support legislation in the area of food contact materials and articles

A strong science base is required to underpin the planning and decision-making process involved in determining future European community legislation on materials and articles in contact with food. Significant progress has been made in the past 5 years in European funded work in this area, with many developments contributing to a much better understanding of the migration process, and better and simpler approaches to food control. In this paper this progress is reviewed against previously identified work-areas (identified in 1994) and conclusions are reached about future requirements for R&D to support legislation on food contact materials and articles over the next 5 or so years.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Influence des ions sur le pouvoir hydratant de l'ure e: e tude sur peau de porc ex vivo

This study deals with the influence of ions (NaCl and MgSO4) in a W/O emulsion containing 10% urea. Moisturization kinetics are assessed by corneometry on pig skin ex vivo. The formula's influence on urea penetration is measured by infrared spectrometry with an ATR device and the stripping method. Corneometry and spectroscopy were chosen to record simultaneously the hydratation levels and urea localization into superficial cell layers. Urea crystallization after evaporation of emulsions and aqueous solutions is described. Results show that urea does not hydrate nor penetrate when applied to the skin through an aqueous gel. In a W/O emulsion, sodium chloride increases the ability of urea to moisturize without improving penetration. In vitro urea crystallization is disturbed by sodium chloride or magnesium sulphate for solutions and emulsions. This stabilization by ions is correlated with good moisturization values. The stabilization of urea in the solute state provided by ions increases its water epidermal binding capacity without enhancing penetration.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.