非线性离散时间系统的自适应模糊补偿控制

针对一类非线性离散时间系统,提出一种自适应模糊逻辑补偿控制方案.控制律由跟踪控制律和逼近误差补偿控制律两部分组成,利用模糊逻辑系统对系统参数扰动和外界干扰进行自适应补偿,由模糊滑模控制律实现对模糊逻辑系统逼近误差的进一步补偿.所设计的控制器可保证闭环系统一致最终有界.将该控制器用于月球探测车动态转向系统中,仿真结果表明了该方法的有效性.     

一类复杂控制系统分散自适应鲁棒控制器设计

基于模糊逻辑系统具有充分利用语言信息和逼近连续函数性质的思想,分析研究了一类非线性不确定复杂系统的自适应控制问题.利用系统的数学模型和模糊逻辑系统对不确定性的输出信息,设计出了复杂系统的分散自适应鲁棒控制器和模糊逻辑系统参数估计的自适应律,在较弱的假设条件下,证明了这种控制器使被控系统的状态及参数估计误差一致终极有界.仿真实例表明,所提出的方法是有效的.     

一种新的非线性离散时间系统的模糊辨识方法

对一类非线性离散时间系统提出一种新的模糊的辨识方法。该方法在假设逼近误差界已知的情况下,基于死区函数对模糊逻辑系统中的未知参数设计自适应学习律;在逼近误差界未知的情况下,基于时变死区函数对模糊逻辑系统中的未知参数设计自适应学习律,并对时变死区进行自适应调节。证明了所设计的自适应学习律均可使辨识误差收敛到原点的一个小邻域内。仿真结果表明了该算法的有效性。     

基于自适应模糊逻辑系统的一类混沌系统同步控制

针对一类带有未知函数和干扰的混沌系统,进行了基于自适应模糊逻辑系统的自适应同步控制器的设计。首先基于模糊逼近原理,通过对该混沌系统中未知函数的输入输出进行采样,根据采样数据信息设计出具有参数自适应功能的Mamdani型模糊逻辑系统;然后利用该模糊逻辑系统给出一种带有参数自适应的驱动响应同步控制器设计方法;最后通过数值仿真算例表明了该方法的有效性。     

一类多变量非线性系统的自适应模糊控制

对一类不确定多变量非线性系统提出了自适应模糊控制方法.该方法采用模糊逻辑系统组成的矩阵逼近控制器中的逆矩阵以避免控制器的奇异性问题,同时用误差补偿项对模糊逻辑系统的逼近误差进行补偿.证明该方法不但能使闭环系统的所有信号有界,而且通过适当调整控制器及自适应律中设计参数,可使跟踪误差收敛到原点的小邻域内.仿真结果验证了方法的有效性.     

带有伸缩器和饱和器的一类非线性系统模糊自适应控制设计

本文针对一类带有未知齐次函数的非线性系统,首先基于伸缩器和饱和器的概念,将T-S型模糊逻辑系统的输入–输出进行改造而形成扩展模糊逻辑系统,然后利用扩展模糊逻辑系统给出一种带有可调伸缩因子参数的模糊自适应控制器的设计方法.由于该方法不依赖模糊规则数目,因而不仅能有效减少在线估计的参数数目,而且能够保证被控系统的状态一致终极有界.最后所给数值仿真算例说明了该设计方法的有效性.     

基于自适应模糊反步法的永磁同步电机位置跟踪控制

研究具有参数不确定性的永磁同步屯动机位置跟踪控制问题.利用模糊逻辑系统逼近系统中非线性函数,采用反步设计方法实现永磁同步电动机的自适应模糊控制.所提出的自适应模糊控制器在电机参数不确定和负载扰动的情况下,实现了永磁同步电动机的高性能位置跟踪控制.仿真结果表明了所提出方法的有效性.     

非线性离散时间系统的自适应模糊补偿控制

针对一类非线性离散时间系统，提出一种自适应模糊逻辑补偿控制新方法。其控制律由跟踪控制律和逼近误差补偿控制律两部分组成。利用模糊逻辑系统对系统参数扰动和外界干扰进行自适应补偿，由模糊滑模控制律来实现对模糊逻辑系统逼近误差的进一步补偿。所设计的控制器可保证闭环系统一致最终有界。     

非完整移动机械手鲁棒自适应模糊控制

考虑系统存在的参数、外界扰动和未建模动态等不确定性,研究非完整移动机械手的鲁棒自适应控制器设计方法.基于用旋量理论建立的非完整移动机械手的动力学模型,设计了移动平台子系统的运动控制器,然后应用非线性反步控制技术和模糊逻辑系统的通用逼近性,用参数化线性模糊逻辑系统逼近非完整移动机械手动力学模型中的不确定项,基于Lyapu...     

基于自适应模糊滑模控制的分数阶混沌系统的投影同步

基于模糊控制理论和滑模控制理论以及自适应控制理论,研究了一类含有外部扰动的不确定分数阶混沌系统的混合投影同步问题.提出了一种自适应模糊滑模控制的分数阶混沌系统投影同步方法.模糊逻辑系统用来逼近未知的非线性函数和外部扰动,并且对逼近误差采用了自适应控制,同时构造了一种具有较强鲁棒性的分数阶积分滑模面.应用分数阶Barbalat引理设计了自适应模糊滑模控制器和参数自适应律.最后数值仿真结果验证了所提控制方法的有效性.     

Adaptive fuzzy control with compressors and limiters for a class of uncertain nonlinear systems

This paper proposes a novel adaptive fuzzy control design for a class of nonlinear uncertain systems. The definition of compressor and limiter with adjustable parameters is introduced at beginning, and then updated laws of parameters of the compressor and estimate values of fuzzy approximation accuracies are utilized to synthesize stable adaptive controllers. The most advantage of designing adaptive fuzzy controller is neglectful of the logic structure of fuzzy logic systems, which make designer focus on parameters of the compressor, limiter and fuzzy approximation accuracies. This adaptive fuzzy control method can not only reduce the number of on-line updated parameters but also guarantee states of the closed-loop system to be uniformly ultimately bounded (UUB). Simulation results demonstrate the effectiveness of the control scheme in this paper.     

Adaptive fuzzy sliding mode control of nonlinear system

In this paper, the fuzzy approximator and sliding mode control (SMC) scheme are considered. We propose two methods of adaptive SMC schemes that the fuzzy logic systems (approximators) are used to approximate the unknown system functions in designing the SMC of nonlinear system. In the first method, a fuzzy logic system is utilized to approximate the unknown function f of the nonlinear system xⁿ⁼ f(x, t)+b(x, t)u and the robust adaptive law is proposed to reduce the approximation errors between the true nonlinear functions and fuzzy approximators. In the second method, two fuzzy logic systems are utilized to approximate the f and b, respectively, and the control law, which is robust to approximation error is also designed. The stabilities of proposed control schemes are proved and these schemes are applied to an inverted pendulum system. The comparisons between the proposed control schemes are shown in simulations     

线性多步法模糊逻辑系统

根据求解常微分方程的线性多步逼近方法构造了线性多步法模糊逻辑系统以辨识由常微分方程所描述的未知动态系统,这种新的模糊逻辑系统在预测状态的同时也能够逼近系统微分方程中的未知函数,文中从理论上对精度作了分析,并用仿真验证了所得的结果。     

自适应模糊全局快速Terminal滑模控制方法

提出了一种自适应模糊全局快速Terminal滑模控制方法,在参数不确定性和外干扰情况下,为解决系统的非线性不确定性提供了一种新途径。与传统模糊Terminal滑模控制相比,通过采用模糊逻辑系统来逼近未知系统函数和开关项;鲁棒自适应律用来减小逼近误差,从而有效降低抖振;证明了该控制方案的稳定性,并将该方案应用在倒立摆系统中。仿真结果验证了该方案的有效性。     

基于局部模糊逻辑系统合成的一类非线性不确定系统自适应控制

通过使用从属于系统状态区域上开覆盖的单位分解,首先将若干个局部生成的模糊逻辑系统合成而产生一种函数逼近器,与通常的模糊逻辑系统相比较,这种逼近器不仅具有万能逼近性质,而且由于局部模糊逻辑系统具有较少规则而能够保持语言可解释性；然后,通过将适当的参数植入这种函数逼近器中,能够为某些非线性不确定系统设计自适应镇定控制器；最后,通过仿真例子验证了所提出方法的有效性.     

Adaptive sliding mode control for MIMO nonlinear systems based on fuzzy logic scheme

In this study an indirect adaptive sliding mode control (SMC) based on a fuzzy logic scheme is proposed to strengthen the tracking control performance of a general class of multi-input multi-output (MIMO) nonlinear uncertain systems. Combining reaching law approach and fuzzy universal approximation theorem, the proposed design procedure combines the advantages of fuzzy logic control, adaptive control and sliding mode control. The stability of the control systems is proved in the sense of the Lyapunov second stability theorem. Two simulation studies are presented to demonstrate the effectiveness of our new hybrid control algorithm.     

Interval type-2 fuzzy inverse controller design in nonlinear IMC structure

In the recent years it has been demonstrated that type-2 fuzzy logic systems are more effective in modeling and control of complex nonlinear systems compared to type-1 fuzzy logic systems. An inverse controller based on type-2 fuzzy model can be proposed since inverse model controllers provide an efficient way to control nonlinear processes. Even though various fuzzy inversion methods have been devised for type-1 fuzzy logic systems up to now, there does not exist any method for type-2 fuzzy logic systems. In this study, a systematic method has been proposed to form the inverse of the interval type-2 Takagi-Sugeno fuzzy model based on a pure analytical method. The calculation of inverse model is done based on simple manipulations of the antecedent and consequence parts of the fuzzy model. Moreover, the type-2 fuzzy model and its inverse as the primary controller are embedded into a nonlinear internal model control structure to provide an effective and robust control performance. Finally, the proposed control scheme has been implemented on an experimental pH neutralization process where the beneficial sides are shown clearly.