变速风力发电机组的自适应滑模变桨距控制

在风力发电系统稳定性优化控制的研究中,针对不确定性的变速风力发电机组的变桨距控制方式系统稳定性差的问题,提出了一种自适应全局快速Terminal滑模控制方法.建立变桨距风力发电机组动力学模型,针对模型中的未知环节,设计了自适应模糊逼近系统.采用由Terminal滑动模态和线性滑动模态组成的滑模模态,采用了自适应Terminal滑模变桨距控制器.根据Lyapunov稳定性理论证明了系统稳定性,并给出了具体的自适应律和不确定项边界的估计算法.对自然风下的机组变桨距控制情况进行了仿真,结果表明系统稳定且输出功率平稳.     

一类非线性不确定系统的非奇异Terminal滑模控制

针对一类二阶非线性系统提出新的Terminal滑模控制面以克服传统的Terminal滑模控制的奇异问题，同时确保系统从任何初始状态能在有限时间内收敛至平衡点．进一步考虑系统参数摄动和外界扰动等不确定性因素上界的未知性，用Lyapunov稳定性方法给出了一个带有未知性上界参数估计的自适应非奇异Terminal滑模控制（NTSM）控制．最后通过实例比较三种滑模控制方法，仿真结果验证了非奇异Terminal滑模控制能克服传统的Terminal滑模控制的奇异问题，并说明了自适应非奇异Terminal滑模控制的有效性和可行性．     

基于模糊干扰观测器的自适应二阶动态滑模控制

针对一类存在不确定性和外干扰的非线性系统滑模控制的抖振问题,本文首先证明了以高斯函数为隶属度函数的模糊基向量对状态向量的偏导在任意情况下有界,解决了模糊辨识同二阶动态滑模结合的关键问题.然后设计了二阶动态Terminal滑模,有效克服了滑模抖振,且能保证滑模面上的滑动在有限时间内收敛.再基于模糊干扰观测器的输出设计自适应鲁棒补偿项.基于李雅普诺夫理论证明了系统稳定性.最后将本文提出的控制方案用于近空间飞行器姿态角跟踪仿真,并分析了高阶动态滑模收敛时间增加的问题.结果表明本文提出的控制方案跟踪速度快、精度高,且有效去除了抖振.与常规Terminal滑模相比,二阶动态Terminal滑模增加的收敛时间非常有限,适于工程应用.     

自适应时变Terminal滑模控制研究

针对Terminal滑模控制到达阶段鲁棒性不强的问题,提出了时变Terminal滑模控制方法。分析Terminal滑模面的设计参数对系统性能的影响,提出一种非线性时变Terminal滑模面的设计方法。为了消除多输入多输出(MIMO)非线性系统的不确定,构建动态干扰观测器系统,根据干扰观测误差在线调节参数,从而在线逼近外部干扰,证明了逼近误差一致最终有界。采用倒立摆系统进行仿真验证,提出的自适应时变Terminal滑模控制方法比传统的PID控制镇定时间缩短80%,且无超调。仿真结果表明,所提方法可以用于MIMO非线性系统的控制。     

一类非线性系统的自适应模糊滑模控制

对一类具有不确定性的非线性系统,根据滑模控制原理并利用模糊系统的逼近能 力,提出了一种自适应模糊滑模控制系统的设计方法.控制结构中采用模糊系统自适应朴偿 过程的不确定性.利用李雅普诺夫理论,证明了控制算法是全局稳定的,跟踪误差可收敛到 零的一个邻域内.     

不确定扰动分数阶混沌系统自适应Terminal滑模同步

针对带扰动不确定分数阶混沌系统的同步问题,基于自适应Terminal滑模控制,设计了一种分数阶非奇异Terminal滑模面,保证误差系统沿着滑模面在有限时间内稳定至平衡点,在系统外部扰动和不确定性的边界事先未知的情况,设计了自适应控制率,在线估计未知边界,使得同步误差轨迹能到达滑模面。最后,以三维分数阶Chen系统和四维分数阶Lorenz超混沌系统为例,利用所设计的自适应Terminal滑模控制器进行同步仿真,验证了所给方法是有效性和可行性。     

超空泡航行体的自适应模糊滑模控制研究

针对超空泡航行体动态中的非线性项和未建模动态,以及由空泡形状改变引起的扰动问题,提出了一种基于自适应模糊滑模的纵平面运动控制器设计方法。该方法利用自适应模糊系统逼近超空泡航行体模型中的非线性不确定项;利用滑模控制对干扰的鲁棒性,克服逼近误差和干扰;最后用Lyapunov定理证明了闭环系统的稳定性。仿真结果表明,设计的控制器可有效克服滑行力的计算误差以及水动力参数的不确定性。     

一类MIMO非线性系统的直接自适应模糊滑模控制

针对一类具有下三角形函数控制增益矩阵的非线性系统, 基于滑模控制原理, 并利用Ⅱ型模糊系统的逼近能力, 提出了一种直接自适应模糊滑模控制器设计的新方案. 通过引入积分型李雅普诺夫函数及逼近误差自适应补偿项, 证明了闭环系统是全局稳定的, 跟踪误差收敛到零. 仿真结果表明了该方法的有效性.     

机器人操作器的自适应模糊滑模控制器设计

针对机器人动力学系统提出了一种基于模糊逻辑的自适应模糊滑模控制方案.根据滑模控制原理并利用模糊系统的逼近能力设计控制器,基于李雅谱诺夫方法设计自适应律,证明了闭环模糊控制系统的稳定性和跟踪误差的收敛性.控制结构简单,不需要复杂的运算.该设计方案柔化了控制信号,减轻了一般滑模控制的抖振现象.仿真结果表明了所提控制策略的有效性.     

非线性离散时间系统的自适应模糊补偿控制

针对一类非线性离散时间系统,提出一种自适应模糊逻辑补偿控制方案.控制律由跟踪控制律和逼近误差补偿控制律两部分组成,利用模糊逻辑系统对系统参数扰动和外界干扰进行自适应补偿,由模糊滑模控制律实现对模糊逻辑系统逼近误差的进一步补偿.所设计的控制器可保证闭环系统一致最终有界.将该控制器用于月球探测车动态转向系统中,仿真结果表明了该方法的有效性.     

Chattering free adaptive fuzzy terminal sliding mode control for second order nonlinear system

A novel fuzzy terminal sliding mode control （FTSMC） scheme is proposed for position tracking of a class of second-order nonlinear uncertain system. In the proposed scheme, we integrate input-output linearization technique to cancel the nonlinearities. By using a function-augmented sliding hyperplane, it is guaranteed that the output tracking error converges to zero in finite time which can be set arbitrarily. The proposed scheme eliminates reaching phase problem, so that the closed-loop system always shows invariance property to parameter uncertainties. Fuzzy logic systems are used to approximate the unknown system functions and switch item. Robust adaptive law is proposed to reduce approximation errors between true nonlinear functions and fuzzy systems, thus chattering phenomenon can be eliminated. Stability of the proposed control scheme is proved and the scheme is applied to an inverted pendulum system. Simulation studies are provided to confirm performance and effectiveness of the proposed control approach.     

Chattering free adaptive fuzzy terminal sliding mode control for second order nonlinear system

A novel fuzzy terminal sliding mode control (FTSMC) scheme is proposed for position tracking of a class of second-order nonlinear uncertain system. In the proposed scheme, we integrate input-output linearization technique to cancel the nonlinearities. By using a function-augmented sliding hyperplane, it is guaranteed that the output tracking error converges to zero in finite time which can be set arbitrarily. The proposed scheme eliminates reaching phase problem, so that the closed-loop system always shows invariance property to parameter uncertainties. Fuzzy logic systems are used to approximate the unknown system functions and switch item. Robust adaptive law is proposed to reduce approximation errors between true nonlinear functions and fuzzy systems, thus chattering phenomenon can be eliminated. Stability of the proposed control scheme is proved and the scheme is applied to an inverted pendulum system. Simulation studies are provided to confirm performance and effectiveness of the proposed control approach.     

多关节机器人的自适应模糊滑模控制

针对多关节机械臂轨迹跟踪控制,提出了一种基于全局快速终端滑模面的自适应模糊滑模控制方法。该方法通过设计合适的自适应律,采用模糊自适应控制调节滑模控制的切换控制增益,实现了对建模误差和不确定干扰的自动跟踪,削弱了抖振。系统不需要对建模误差和干扰进行预估计,并且通过对控制器结构的简化,降低了模糊控制器的维数,减少了计算量。利用李亚普诺夫定理证明了控制系统的稳定性,仿真结果表明了其有效性。     

Adaptive fuzzy terminal sliding mode controller for linear systems with mismatched time-varying uncertainties

A new design approach of an adaptive fuzzy terminal sliding mode controller for linear systems with mismatched time-varying uncertainties is presented in this paper. A fuzzy terminal sliding mode controller is designed to retain the advantages of the terminal sliding mode controller and to reduce the chattering occurred with the terminal sliding mode controller. The sufficient condition is provided for the uncertain system to be invariant on the sliding surface. The parameters of the output fuzzy sets in the fuzzy mechanism are adapted on-line to improve the performance of the fuzzy sliding mode control system. The bounds of the uncertainties are not required to be known in advance for the presented adaptive fuzzy sliding mode controller. The stability of the fuzzy control system is also guaranteed. Moreover, the chattering around the sliding surface in the sliding mode control can be reduced by the proposed design approach. Simulation results are included to illustrate the effectiveness of the proposed adaptive fuzzy terminal sliding mode controller.     

Decentralized adaptive fuzzy sliding mode control for reconfigurable modular manipulators

A stable decentralized adaptive fuzzy sliding mode control scheme is proposed for reconfigurable modular manipulators to satisfy the concept of modular software. For the development of the decentralized control, the dynamics of reconfigurable modular manipulators is represented as a set of interconnected subsystems. A first‐order Takagi–Sugeno fuzzy logic system is introduced to approximate the unknown dynamics of subsystem by using adaptive algorithm. The effect of interconnection term and fuzzy approximation error is removed by employing an adaptive sliding mode controller. All adaptive algorithms in the subsystem controller are derived from the sense of Lyapunov stability analysis, so that resulting closed‐loop system is stable and the trajectory tracking performance is guaranteed. The simulation results are presented to show the effectiveness of the proposed decentralized control scheme. Copyright © 2009 John Wiley & Sons, Ltd.     

基于自适应模糊滑模控制的分数阶混沌系统的投影同步

基于模糊控制理论和滑模控制理论以及自适应控制理论,研究了一类含有外部扰动的不确定分数阶混沌系统的混合投影同步问题.提出了一种自适应模糊滑模控制的分数阶混沌系统投影同步方法.模糊逻辑系统用来逼近未知的非线性函数和外部扰动,并且对逼近误差采用了自适应控制,同时构造了一种具有较强鲁棒性的分数阶积分滑模面.应用分数阶Barbalat引理设计了自适应模糊滑模控制器和参数自适应律.最后数值仿真结果验证了所提控制方法的有效性.     

A Robust Adaptive Terminal Sliding Mode Control for Rigid Robotic Manipulators

In this paper, a robust adaptive terminal sliding mode controller is developed for n-link rigid robotic manipulators with uncertain dynamics. An MIMO terminal sliding mode is defined for the error dynamics of a closed loop robot control system, and an adaptive mechanism is introduced to estimate the unknown parameters of the upper bounds of system uncertainties in the Lyapunov sense. The estimates are then used as controller parameters so that the effects of uncertain dynamics can be eliminated and a finite time error convergence in the terminal sliding mode can be guaranteed. Also, a useful bounded property of the derivative of the inertial matrix is explored, the convergence rate of the terminal sliding variable vector is investigated, and an experiment using a five bar robotic manipulator is carried out in support of the proposed control scheme.     

Adaptive type-2 fuzzy sliding mode controller for SISO nonlinear systems subject to actuator faults

In this paper, an adaptive type-2 fuzzy sliding mode control to tolerate actuator faults of unknown nonlinear systems with external disturbances is presented. Based on a redundant actuation structure, a novel type-2 adaptive fuzzy fault tolerant control scheme is proposed using sliding mode control. Two adaptive type-2 fuzzy logic systems are used to approximate the unknown functions, whose adaptation laws are deduced from the stability analysis. The proposed approach allows to ensure good tracking performance despite the presence of actuator failures and external disturbances, as illustrated through a simulation example.     

Adaptive sliding mode trajectory tracking control for wheeled mobile robots

This paper discusses the problem of adaptive sliding mode trajectory tracking control for wheeled mobile robots in the presence of external disturbances and inertia uncertainties. A new fast nonsingular terminal sliding mode surface without any constraint is proposed, which not only avoids singularity, but also retains the advantages of sliding mode control. In order to implement the trajectory tracking mission, the error dynamic system is divided into a second-order subsystem and a third-order one. First, an adaptive fast nonsingular terminal sliding mode control law of the angular velocity is constructed for stabilising the second-order subsystem in finite time. Then, another adaptive fast nonsingular terminal sliding mode control law of the linear velocity is designed to guarantee the stability of the third-order subsystem. Finally, a simulation example is provided to demonstrate the validity of the proposed control scheme.