计弱连接条件下网络数据多信道传输节点路径调控方法

针对传统方法在计弱连接条件下调控网络数据传输路径时,无法均匀调整传输节点路径上的信息量,导致数据传输能耗较大且数据传输效率低,提出一种计弱连接条件下网络数据多信道传输节点路径调控方法。构建网络数据多信道传输节点模型,确定最佳的数据传输节点路径队列,使传输节点路径上的信息量均匀传输。利用信道分配的路径调控方法进行数据传输节点路径优化,有效降低数据传输能耗,提高了数据多信道节点传输效率,完成对计弱连接条件下网络数据多信道传输节点路径的调控。实验结果表明,该方法有效提高了数据多信道节点传输的效率,可有效解决传统方法存在的弊端,对该领域发展有着重要意义。     

基于最大化网络吞吐量的WMN信道分配算法

为了解决无线Mesh网络中的信道分配问题,提出了一种基于博弈论的信道分配算法.该算法将网络中每一个节点模型化为一个博弈者,每个博弈者的策略为信道的分配方案,并将整个网络的吞吐量作为效用函数的目标,效用函数的物理意义则是在给定流量需求矩阵下传输的成功率.博弈者通过相互博弈来优化收益函数以最大化网络吞吐量.通过NS2.34仿真分析得出,GBCA算法在收敛性、丢包率和吞吐量上都要优于当前的算法.     

一种基于博弈论的无线mesh网络信道分配算法

无线mesh网络中的信道分配会极大地影响网络的性能。为了解决无线mesh网络中的信道分配问题,提出了一种基于博弈论的信道分配(GBCA)算法。该算法将网络中每一个节点模型化为一个博弈者,每个博弈者的策略为信道的分配方案,并将整个网络的吞吐量作为效用函数的目标,效用函数的物理意义则是在给定流量需求矩阵下传输的成功率。博弈者通过相互博弈来优化收益函数,以最大化网络吞吐量。并针对GBCA算法的不足,提出了一种改进算法———GBCA-TP算法。通过NS2.34仿真分析得出,GBCA算法和GBCA-TP算法在收敛性、分组丢失率和吞吐量上都要优于当前的算法。     

射频供能无线传感器网络高能效数据收集方案

在射频供能无线传感器网络中,提高网络能效和吞吐率是一个重要的研究问题.该文统筹考虑信道分配、节点的能量阈值以及MAC（Medium Access Control）帧分块重传机制,提出高能效和高吞吐率的数据收集方案;推导了节点的充电时间、节点传输一个MAC帧的平均能耗和平均时延、网络能效和吞吐率,定义了网络效用函数,形成了最大化网络效用的优化问题.通过调整效用系数并求解优化问题,可以获得使网络能效和吞吐率最大化的最优能量阈值和MAC帧最优分块个数.仿真结果表明,所提方案的能效和吞吐率高于已有方案.     

无线传感器网络能量高效混合MAC算法

针对无线传感器网络MAC协议中存在的能耗问题,提出了能量高效的无线传感器网络混合MAC(EEH-MAC)算法,采用基于TDMA机制的时槽系数动态调整簇内节点的时槽大小来降低数据的传输时延;同时,对部分不需要数据传输的节点不分配时槽来减少能耗;按簇内节点剩余能量系数形成时槽分配顺序来减少状态转换的能耗;在簇头之间采用CSMA/CA机制的随机分配策略进行通信.仿真结果表明,EEH-MAC协议能有效减少能耗并延长网络生命周期.     

基于移动性感知的无线传感器网络GTS自适应分配策略

为解决移动无线传感器网络中节点连通性较弱的问题,提出一种包含不同移动性节点的无线传感器网络提升移动节点连通性的保障时隙(GTS, guaranteed time slot)分配策略.首先,采用Kalman滤波预测模型得到用户下一阶段位置;接下来,引入一种考虑速度、方向和相对移动性的节点移动程度界定方法,并在此基础上进行GTS预约优先级的初步确定;随后,根据移动节点对所预约时隙的使用反馈情况自适应调整预约优先级;最后,根据节点的优先级决定GTS时隙的使用顺序及额外预留时隙的使用权.仿真结果显示,提出的分配策略在具有不同移动性节点的网络中,能够提高移动节点接入的成功率,保证较低的分组平均传输时延及较高的分组投递率.此外,采用基于反馈机制的自适应预约优先级调整策略能够显著增加整个网络中已分配时隙的正确使用率.     

海水养殖监测系统无线传感器网络节点数据传输研究

文章将无线传感器网络应用于海水养殖监测系统,根据海上养殖监测的特点,提出一种适合于海水养殖的节点数据传输机制,对应于正常数据和异常数据,采用自适应的数据传输机制进行数据传输,降低传输数据量,进行了网络能量优化。仿真结果表明,在异常数据率较小的情况下,自适应的数据传输中节点产生的平均数据量和平均冗余数据量比普通的事件驱动型数据传输要小很多,大大降低了能耗,提高了传输效率。在信道传输质量比较差的情况下,自适应的数据传送机制提高传输效率更明显。     

基于信道切换的车联网数据传输算法

提出一种基于信道切换的车联网数据传输算法（DTA）。DTA算法考虑由车辆节点、中继节点和汇聚节点组成的三层网络,根据车辆的行驶方向进行节点的分类,提出不同的信道分配和切换机制,减少了数据传输的干扰。提出中继节点信息的快速扩散方法。提出紧急路况信息的优先传输方法,采用不同的队列将数据分类,并根据队列优先级选择传输数据。仿真结果表明,DTA算法能够有效地实现有用信息的快速传输,减少不必要的损耗,提高汇聚节点数据接收率,降低数据分组平均跳数和提高数据传输的覆盖率。在一定的条件下,DTA算法比AODV算法和AODV-L算法更优,可适用于快速变化的车辆行驶环境。     

基于802.11协议的无线传感器数据流优先级模型

本文利用数学分析方法做了验证,结果表明,该机制对于高优先级数据数据优先传送的作用是非常明显的,在传输过程,数据流分组丢失的情况也得到了有效遏制。本文还对该机制的能耗情况进行了分析,结果表明,高优先级的能耗水平低于低优先级,并且这种趋势随着节点数的增加而更加明显。因此,本文所提出的提高高优先级传输效率的机制,更适用于节点数比较高的网络中。     

Ad Hoc网络中的多信道多接口技术研究

无线自组织网络是一种不依赖基础设施的无线网络,网络中节点均是由移动主机构成.文中通过修改NS2中的移动节点结构引入多信道多接口,可以使得路由协议能够灵活调用多信道功能,并根据AODVPlus协议的实现机制,提出一种对应的信道分配策略.通过仿真模拟与单信道进行比较分析得出,多信道多接口在传输率与传输时延方面比单信道都有所改善,但有效的多信道分配策略显得尤为重要.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.