SLA-aware operational efficiency in AI-enabled service chains: challenges ahead

Information Systems and e-Business Management - Service providers compose services in service chains that require deep integration of core operational information systems across organizations....     

Synthesis and Characterization of Hetero-metallic Oxides-Reduced Graphene Oxide Nanocomposites for Photocatalytic Applications

A new AgO.CuO.WO₃/rGO nanocomposite was designed for the investigation of the degradation ability of the hybrid material under visible light irradiation. The AgO, CuO, WO₃ NPs, and AgO.CuO.WO₃ hetero-metallic oxides were fabricated via the chemical co-precipitation method. The crystallite sizes and phase analyses were investigated by recording X-ray diffraction patterns. The crystallite sizes of three metal oxides in the AgO.CuO.WO₃ hetero metal oxide were 16.7, 15.9, and 16.9 nm, respectively. The FESEM images at various magnifications were probed to study the morphology of synthesized materials. The micrographs of hetero-metallic oxides AgO.CuO.WO₃ exposed that three metal oxides merged like small particles and gives a large bulbous appearance. EDX analyses confirmed the formation of required materials with high purity. FTIR data was in agreement with the literature which facilitated to ensure the purity of synthesized samples. The optical bandgap energy was calculated via the Tauc plot indicating that the blend of three metal oxides generated a new energy level in the electronic structure is suitable for photocatalysis in the presence of visible light. The bandgap energy of hetero metallic oxides was 1.25 eV which is less than individual metal oxides signifying the tuning of the bandgap. The incorporation of rGO in AgO.CuO.WO₃ hetero-metallic oxides gives a new photocatalyst for optimum photodegradation of methylene blue in minimum time. The percentage degradation via AgO.CuO.WO₃ was 87.20% in 70 min while the percentage degradation via AgO.CuO.WO₃/rGO recorded by photocatalytic experiment was 95% in 40 min. The photocatalysis data revealed that AgO.CuO.WO₃ hetero-metallic oxides-rGO nanocomposite ensured a strong potential to uptake organic dyes from water by promoting redox reactions during photocatalysis in the minimum time limit.     

In vitro evaluation and in vivo performance of lyophilized gliclazide

Enhancement of the dissolution rate of the poorly water-soluble hypoglycemic agent, gliclazide, by the aid of lyophilization was investigated. Mannitol, sodium lauryl sulfate (SLS) and polyvinyl pyrrolidone (PVP-k-30) were employed in different weight ratios (43%, 56% and 64% w/w, respectively) as water-soluble excipients in the formulation. Lyophilized systems were found to exhibit extremely higher in vitro dissolution rate compared to the unprocessed drug powder. Solid state characterization of the lyophilized systems using X-ray powder diffraction, Fourier transform infrared spectroscopy and differential scanning calorimetry techniques revealed that dissolution enhancement was attributable to transformation of gliclazide from the crystalline to an amorphous state in the solid dispersion formed during the lyophilization process. The gastrointestinal absorption and hypoglycemic effect of the lyophilized gliclazide/SLS system were investigated following oral administration to Albino rabbits. C_max and area under the plasma concentration–time curve of gliclazide (AUC_0–12) after administration of the lyophilized formulations were significantly higher than those obtained after administration of the unprocessed gliclazide.     

Modification and ionic stimulation of hollow fiber membrane by electric field for water treatment

Hollow fiber membrane (HF) is considered one of the prevalent materials for water treatment; its effectiveness is controlled by permeation and mechanical characteristics. In this study, HF membrane surface was stimulated using electrochemical technique, where binary system of stainless steel cylinder and graphite rod electrodes was used into electrolytic solution of sodium acetate 0.1 M as electrolyte. Two pH of acidic medium (pH = 3.5) and alkaline medium (pH = 8.5) were prepared and different potential between 2 and 10 V were applied. EDX analysis of HF membrane surface revealed the formation of sodium ions on the surface of HF membrane with maximum content of Na⁺ ions 1.84%. Also, HF membrane surface showed variation of roughness (R _a) as, HF membrane surface may undergo distortion by using aggressive conditions of high electric potential (7.5–10 V), The measured raw HF membrane (R _a) was 34.8 nm, while, after electrochemical modification in alkaline medium R _a showed higher values 36, 37, and 41 nm using 2, 2.5, and 5 V, respectively. While, after electrochemical modification in acidic medium (R _a) showed 35, 39, 42, 49, 52 nm for 2, 2.5, 5, 7.5, and 10 V, respectively. Moreover, tensile strength Young's modulus, break stress and break strain were measured after electrochemical modification in both acidic and alkaline mediums and maximum porosity value 76.84% was observed after 30 min in acidic medium.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Improvement Properties of Cohesion-Less Soil Using Recycled Bassanite

Solid waste management is a serious problem over the world. Therefore, reduction, re-use and recycling of waste have become major issues in recent days. Gypsum waste plasterboard is considered one example of these waste materials. This study evaluates the use of recycled bassanite, which is derived from gypsum waste plasterboard, to enhance the performance of two types of cohesion-less soil. Recycled bassanite was utilized as a stabilizing agent to improve both compressive and splitting strengths of the tested soil. The effect of bassanite content, soil type, water content and curing time were investigated to explore the behavior of treated soil with recycled bassanite. Test results showed that increase of bassanite content is associated with increase in optimal moisture content, while no significant increase in the dry unit weight was observed. Both compressive and splitting tensile strengths enhanced with the additives of recycled bassanite. The increase of bassanite content had a more significant effect on the compressive strength compared with the effect on tensile strength. The use of recycled bassanite to enhance the strength of sandy soil had a more significant effect compared with silty soil. The effect of curing time on the strength of treated samples was more significant in early curing ages compared with late curing ages. The strength decreased significantly in case of stabilized samples prepared with water content at the wet-side of the compaction curve. However, insignificant decrease in the strength of the stabilized sample was detected with moisture content at the dry-side of compaction curve. This research meets the challenges of our society to reduce the quantities of gypsum wastes, producing useful material from waste materials that will help to a sustainable society.     

Detection of Fat Concentration in Milk Using Ternary Photonic Crystal

Silicon - Rapid and sensitive detection of fat concentration in milk is a necessary part for citizens in each country. Bio-photonic sensing techniques are an accurate best way to detect biosensing...     

Blood calcium dynamics after prophylactic treatment of subclinical hypocalcemia with oral or intravenous calcium

Total serum Ca dynamics and urine pH levels were evaluated after prophylactic treatment of subclinical hypocalcemia after parturition in 33 multiparous Jersey × Holstein crossbreed cows. Cows were blocked according to their calcemic status at the time of treatment [normocalcemic (8.0–9.9 mg/dL; n = 15) or hypocalcemic (5.0–7.9 mg/dL; n = 18)] and randomly assigned to 1 of 3 treatments: control [no Ca supplementation (n = 11)]; intravenous Ca [Ca-IV (n = 11), 500 mL of 23% calcium gluconate (10.7 g of Ca and 17.5 g of boric acid as a solubilizing agent; Durvet, Blue Springs, MO)]; or oral Ca [Ca-Oral (n = 11), 1 oral bolus (Bovikalc bolus, Boehringer Ingelheim, St. Joseph, MO) containing CaCl₂ and CaSO₄ (43 g of Ca) 2 times 12 h apart]. Total serum Ca levels were evaluated at 0, 1, 2, 4, 8, 12, 16, 20, 24, 36, and 48 h, and urine pH was evaluated at 0, 1, 12, 24, 36, and 48 h after treatment initiation. Total serum Ca levels were higher for Ca-IV than for control and Ca-Oral cows at 1, 2, and 4 h after treatment initiation, but lower than Ca-Oral cows at 20, 24, and 36 h and lower than control cows at 36 and 48 h. At 1 h after treatment initiation, when serum Ca levels for Ca-IV cows peaked (11.4 mg/dL), a greater proportion of Ca-IV (n = 8) cows had total serum Ca levels >10 mg/dL than control (n = 0) and Ca-Oral (n = 1) cows. At 24 h after treatment initiation, when Ca-IV cows reached the total serum Ca nadir (6.4 mg/dL), a greater proportion of Ca-IV (n = 10) cows had serum Ca levels <8 mg/dL than control (n = 5) and Ca-Oral (n = 2) cows. Treatment, time, and treatment × time interaction were significant for urine pH. Mean urine pH was lower for Ca-Oral cows (6.69) than for control (7.52) and Ca-IV (7.19) cows. Urine pH levels at 1 h after treatment were lower for Ca-IV cows compared with both control and Ca-Oral cows, a finding likely associated with the iatrogenic administration of boric acid added as a solubilizing agent of the intravenous Ca solution used. At 12, 24, and 36 h, urine pH levels were lower for Ca-Oral cows compared with both control and Ca-IV cows. This was expected because the oral Ca supplementation used (Bovikalc) is designed as an acidifying agent. Wide fluctuations in blood Ca were observed after prophylactic intravenous Ca supplementation. The implications for milk production and animal health, if any, of these transient changes in total serum Ca have yet to be evaluated.     

Copper substituted nickel ferrite nanoparticles anchored onto the graphene sheets as electrode materials for supercapacitors fabrication

Nickel ferrites with high theoretical capacitance value as compared to the other metal oxides have been applied as electrode material for energy storage devices i.e. batteries and supercapacitors. High tendency towards aggregation and less specific surface area make the metal oxides poor candidate for electrochemical applications. Therefore, the improvements in the electrochemical properties of nickel ferrites (NiFe₂O₄) are required. Here, we report the synthesis of graphene nano-sheets decorated with spherical copper substituted nickel ferrite nanoparticles for supercapacitors electrode fabrication. The copper substituted and unsubstituted NiFe₂O₄ nanoparticles were prepared via wet chemical co-precipitation route. Reduced graphene oxide (rGO) was prepared via well-known Hummer's method. After structural characterization of both ferrite (Ni_1-xCu_xFe₂O₄) nanoparticles and rGO, the ferrite particles were decorated onto the graphene sheets to obtain Ni_1-xCu_xFe₂O₄@rGO nanocomposites. The confirmation of preparation of these nanocomposites was confirmed by scanning electron microscopy (SEM). The electrochemical measurements of nanoparticles and their nanocomposites (Ni_0.9Cu_0.1Fe₂O₄@rGO) confirmed that the nanocomposites due to highly conductive nature and relatively high surface area showed better capacitive behavior as compared to bare nanoparticles. This enhanced electrochemical energy storage properties of nanocomposites were attributed to the graphene and also supported by electrical (I-V) measurements. The cyclic stability experiments results showed ~65% capacitance retention after 1000 cycles. However this retention was enhanced from 65% to 75% for the copper substituted nanoparticles (Ni_0.9Cu_0.1Fe₂O₄) and 65–85% for graphene based composites. All this data suggest that these nanoparticles and their composites can be utilized for supercapacitors electrodes fabrication.     

Development and comparison of loop-mediated isothermal amplification and quantitative polymerase chain reaction assays for the detection of Mycoplasma bovis in milk

Bovine mastitis is an economic burden for dairies worldwide. Mycoplasma species, and especially Mycoplasma bovis, are among the most important causative agents, and rapid, precise, and low-cost methods for Mycoplasma detection are urgently needed. For this purpose, loop-mediated isothermal amplification (LAMP) and quantitative PCR (qPCR) assays were developed and compared. The LAMP assay was designed and primer concentrations optimized to M. bovis oppD, encoding oligopeptide permease D. For qPCR, a Taqman assay (Applied Biosystems, Carlsbad, CA) targeting M. bovis gltX, encoding glutamate transfer RNA ligase, was optimized for primer concentration, annealing temperature, and DNA polymerase. Both assays were similarly sensitive, with a detection limit of approximately 10⁴ to 10⁵ M. bovis cells/mL. Both assays were also successful in confirming M. bovis identity in laboratory culture suspensions and in bovine milk. The LAMP and qPCR assays combined with the MoBio DNA extraction kit (MoBio Laboratories Inc., Carlsbad, CA) resulted in the correct detection of 13 out of 13 M. bovis isolates and 14 out of 16 M. bovis-positive milk samples collected from commercial dairies in California. When combined with the PrepMan Ultra reagent (Applied Biosystems), the qPCR assay resulted in confirming 21 out of 21 M. bovis-positive milk samples. Comparison of the assays to milk containing either Mycoplasma arginini, Mycoplasma bovigenitalium, Mycoplasma californicum, M. alkalescens, or Acholeplasma laidlawii or milk lacking any detectable Mycoplasma species or relatives resulted in 3 out of 17 (LAMP with MoBio), 1 out of 17 (qPCR with MoBio), and 2 out of 36 (qPCR with PrepMan Ultra) false positives. Overall, the qPCR assay was more robust than LAMP and could be used on DNA recovered from milk prepared with the PrepMan Ultra reagent, a method that does not include a DNA purification step. The use of this qPCR method enables M. bovis detection in bovine milk in 40 to 55 min, and therefore provides new opportunities to accelerate and simplify M. bovis detection in unpasteurized milk to reduce the incidence of M. bovis mastitis outbreaks.