Novel measurement system for respiratory aerosols and droplets in indoor environments

The SARS-CoV-2 pandemic has created a great demand for a better understanding of the spread of viruses in indoor environments. A novel measurement system consisting of one portable aerosol-emitting mannequin (emitter) and a number of portable aerosol-absorbing mannequins (recipients) was developed that can measure the spread of aerosols and droplets that potentially contain infectious viruses. The emission of the virus from a human is simulated by using tracer particles solved in water. The recipients inhale the aerosols and droplets and quantify the level of solved tracer particles in their artificial lungs simultaneously over time. The mobile system can be arranged in a large variety of spreading scenarios in indoor environments and allows for quantification of the infection probability due to airborne virus spreading. This study shows the accuracy of the new measurement system and its ability to compare aerosol reduction measures such as regular ventilation or the use of a room air purifier.     

Comparative techno-economic assessment of a large-scale hydrogen transport via liquid transport media

A large-scale point to point hydrogen transport is one strategy for a prospective energy import scenario for certain countries. The case for a hydrogen transport from Australia to Japan has been addressed in several studies. However, most studies lack transparency and detailed insights into the made assumptions thus a fair evaluation of different transport pathways is challenging. To address this issue, we developed a model where a large-scale point to point hydrogen transport of liquid hydrogen is compared with the transport via liquid organic hydrogen carrier (LOHC), namely via methyl cyclohexane and hydrogenated dibenzyl toluene. We analyzed, where energy is required along the different pathways, where hydrogen losses do occur and how the costs are put together. Furthermore, the influence of hydrogen feed costs is also considered. For hydrogen production costs of 5 €₂₀₁₈/kg_H2 the total delivery costs are in the range of 6.40– 8.10 €₂₀₁₈/kg_H2.     

Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography

The so-called Freeze Foaming method aims at manufacturing ceramic cellular scaffolds for diverse applications. One application is dedicated to potential bone replacement material featuring open, micro and interconnected porosity. However, the main challenges of this foaming method is to achieve a homogeneous pore morphology. In a current project, the authors throw light on the bubble/pore and strut formation of this process by in situ computed tomography. This allows for evaluating varying process parameter’s effects on the growth of the ceramic foam during the foaming process. As first result and basis for CT analysis, a stable and reproducible model suspension was developed which resulted in reproducible foam structures. In dependence of selected process parameters like pressure reduction rate or air content in the ceramic suspension resulting Freeze Foams became adjustable with regard to their pore morphology. Pore size and distribution data as well as the porosity were characterized and evaluated accordingly.     

Experimentelle und analytische Untersuchung des out‐of‐plane‐Verhaltens von unbewehrten Mauerwerkswänden unter Erdbebenbelastung

Experimental and analytical investigation of the seismic out‐of‐plane behavior of unreinforced masonry walls In addition to the vertical and horizontal load‐bearing in‐plane, masonry must also withstand out‐of‐plane loads that occur in earthquake scenarios. The out‐of‐plane behavior of unreinforced masonry walls depends on a variety of parameters and is very complex due to the strong non‐linearity. Current design methods in German codes and various international codes have not been explicitly developed for out‐of‐plane behavior and contain considerable conservatism. In the present work, shaking‐table experiments with heat‐insulating masonry walls have been conducted to investigate the out‐of‐plane behavior of vertical spanning unreinforced masonry walls. As shown in previous numerical investigations, important parameters are neglected in existing design and analysis models and the out‐of‐plane capacity is underestimated significantly. In the conducted experiments the results of these numerical investigations are verified. Furthermore, the development of an analytical design model to determine the force‐displacement relationship and the out‐of‐plane load‐bearing capacity considering all significant parameters is presented.     

Properties and microstructure of copper-alloyed solid solution-strengthened ductile iron

Solid solution-strengthened ductile iron (DI) exhibits outstanding mechanical properties due to the high silicon content. The strengthening by silicon addition is limited since additions above 4.3?wt-% lead to embrittlement. For a further improvement of mechanical properties, other alloying elements need to be considered. In the present work, the effect of various copper additions on the microstructure and the mechanical properties of solid solution-strengthened DI were investigated. The results show that no appreciable strengthening can be achieved by copper addition without the formation of pearlite in the matrix. The pearlite content increases considerably for Cu-additions above 0.23?wt-% and is independent of the cooling rate for the cooling conditions analysed.     

Produktschonende Betriebs‐ und Designparameter von Wärmeübertragern für temperaturempfindliche Prozessströme

To allow the calculation of product degradation rates as extension to the currently used thermotechnical design calculations for heat exchangers, a volume‐related, reaction‐kinetic approach was developed. Therefore, a model system was selected and the product protection design parameters were determined for a lab‐scale heat exchanger with the help of simulations. The validation was demonstrated in an experiment. Additionally, the product‐protecting operating parameters for the heat exchanger were calculated with a technically relevant set of compounds.     

Active Site Mapping of Human Cathepsin F with Dipeptide Nitrile Inhibitors

Cleavage of the invariant chain is the key event in the trafficking pathway of major histocompatibility complex class II. Cathepsin S is the major processing enzyme of the invariant chain, but cathepsin F acts in macrophages as its functional synergist which is as potent as cathepsin S in invariant chain cleavage. Dedicated low‐molecular‐weight inhibitors for cathepsin F have not yet been developed. An active site mapping with 52 dipeptide nitriles, reacting as covalent–reversible inhibitors, was performed to draw structure–activity relationships for the non‐primed binding region of human cathepsin F. In a stepwise process, new compounds with optimized fragment combinations were designed and synthesized. These dipeptide nitriles were evaluated on human cysteine cathepsins F, B, L, K and S. Compounds 10 (N‐(4‐phenylbenzoyl)‐leucylglycine nitrile) and 12 (N‐(4‐phenylbenzoyl)leucylmethionine nitrile) were found to be potent inhibitors of human cathepsin F, with K_i values <10 nM . With all dipeptide nitriles from our study, a 3D activity landscape was generated to visualize structure–activity relationships for this series of cathepsin F inhibitors.