Cr doped ZnAl2O4 spinel samples were prepared by the traditional solid state reaction and co-precipitation synthetic route, and the results suggest that the co-precipitation method has some superiority in contrast to the solid state reaction method. XRD, FT-IR, and XPS spectra confirmed that the well-crystallized spinel cubic phase of ZnAl2O4: Cr3+ samples were successfully formed. The morphology of the samples was investigated by FE-SEM and FE-TEM, and the results show that the samples by the co-precipitation route can generate a smaller size of particles compared to the solid state reaction. Photoluminescence excitation spectra monitored at 686 nm are comprised of two broad excitation bands near 530 nm and 395 nm, and the emission spectra show emissions ranging from 640 to 780 nm, due to the 2E?→?4A2 spin-forbidden transition of Cr3+ ions in spinel lattices. The optimized concentration monitored at 686 nm is 1%, while at 693 nm is 3.5%. Compared with the samples by solid state reaction method, the samples by co-precipitation method show preferable luminescent properties, such as the higher photoluminescence intensity and higher quantum efficiency. Several phosphor-converted LEDs were to investigate the applicability of the prepared samples. The results confirm that the phosphor has potential applications in plant growth and supplementing the red region in white-LEDs and the phosphors prepared by co-precipitation are more suitable to be used in phosphor-converted LED devices due to their preferable luminescent properties.
Portable humidity sensors with ultrafast responses fabricated in wearable devices have promising application prospects in disease diagnostics, health status monitoring, and personal healthcare data collecting. However, prolonged exposures to high‐humidity environments usually cause device degradation or failure due to excessive water adsorbed on the sensor surface. In the present work, a graphene film based humidity sensor with a hydrophobic surface and uniformly distributed ring‐like wrinkles is designed and fabricated that exhibits excellent performance in breath sensing. The wrinkled morphology of the graphene sensor is able to effectively prevent the aggregation of water microdroplets and thus maximize the evaporation rate. The as‐fabricated sensor responds to and recovers from humidity in 12.5 ms, the fastest response of humidity sensors reported so far, yet in a very stable manner. The sensor is fabricated into a mask and successfully applied to monitoring sudden changes in respiratory rate and depth, such as breathing disorder or arrest, as well as subtle changes in humidity level caused by talking, cough and skin evaporation. The sensor can potentially enable long‐term daily monitoring of breath and skin evaporation with its ultrafast response and high sensitivity, as well as excellent stability in high‐humidity environments. 相似文献
In this article, a decentralized optimal tracking control strategy is proposed for a class of nonlinear systems with tracking error constraints by utilizing adaptive dynamic programming (ADP). It should be noted that ADP technology cannot be directly used to solve decentralized optimal tracking problem of large-scale interconnected nonlinear system with nonzero equilibrium points, since that an infinite domain performance index function may result in an unsolvable solution. In addition, by introducing a smooth function, the constrained tracking error is transformed into an unconstrained one. Then, the error dynamics and a new infinite domain performance index function are designed, such that ADP technology can be used. Following the designed performance index function, the tracking error can be ensured within a small neighborhood of zero. Finally, the feasibility and the effectiveness of the proposed decentralized optimal control scheme are verified through two simulation examples. 相似文献
Surimi is considered a new base ingredient in special dietary foods because of its excellent gel formation properties and nutritional value. Cross-linked network structures are the basis for the formation of protein hydrogels. In this work, protein network structure induced by NaCl was investigated to evaluate its effects on texture property and digestibility of surimi gels. Micro-protein frameworks were investigated by scanning electron microscope combined with computer simulation, which indicated that the network structure became fine and smooth as a result of salt treatment. The digestibility of surimi with NaCl was higher than that of blank samples in simulated gastric juice in first 30 min, whereas the digestibility showed no significant difference (P = 0.257) in intestinal juice after 180 min. This work aids in understanding of the contribution of salt to the mechanism of surimi gels formation, and its effects on digestion, thus supporting potential applications in special dietary food. 相似文献
The appearance of colossal permittivity materials broadened the choice of materials for energy-storage applications. In this work, colossal permittivity in ceramics of TiO2 co-doped with niobium and europium ions ((Eu0.5Nb0.5)xTi1-xO2 ceramics) was reported. A large permittivity (εr ~ 2.01?×?105) and a low dielectric loss (tanδ ~ 0.095) were observed for (Eu0.5Nb0.5)xTi1-xO2 (x?=?1%) ceramics at 1?kHz. Moreover, two significant relaxations were observed in the temperature dependence of dielectric properties for (Eu, Nb) co-doped TiO2 ceramics, which originated from defect dipoles and electron hopping, respectively. The low dielectric loss and high relative permittivity were ascribed to the electron-pinned defect-dipoles and electrons hopping. The (Eu0.5Nb0.5)xTi1-xO2 ceramic with great colossal permittivity is one of the most promising candidates for high-energy density storage applications. 相似文献
Fog, frost, ice, and other natural phenomena can inevitably affect human life and the function of equipment. Therefore, removal or prevention is an urgent problem to be solved. As a new type of 2D material, graphene possesses great application potential in defogging and antiicing. In this work, a graphene film with intentionally increased defects and uniformly distributed wrinkles is synthesized on copper–zinc alloy substrates by chemical vapor deposition, and transparent electrothermal film defoggers are prepared based on such material. The defoggers can completely remove fog within 5 s when supplying a safe voltage of 28 V. The surface resistance of the defoggers is sensitive to humidity and it can monitor the defogging process in real time. Such outstanding performance is attributed to the ultrafast evaporation mechanism, which can prevent excessive water accumulation. The antiicing performance of wrinkled graphene (WG) is further studied. The antiicing coatings can delay freezing for 1.25 h at ?15 °C or 2.8 h at ?10 °C. The superior performance of WG can be explained by its unique surface structure and nanoscale roughness. Taken together, WG is expected to be used in antifog glass, rearview mirror defogging, aircraft surface deicing, and other applications. 相似文献