Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction

Nano‐sized polyhedral oligomeric silsesquioxane (POSS) diol or ethylene glycol (EG) as diol monomer was incorporated into hydroxyl‐terminated polybutadiene (HTPBD) chain in the presence of fumaryl or thionyl chloride as extenders. Using these polyesterification reactions, two fumarate‐based polyesters and two polyester sulfites were synthesized. Each couple of polyesters and polyester sulfites includes a linear (diol:EG) and a nanohybrid macromer (diol:POSS). Full structural characterization was performed using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies. Gel permeation chromatography was undertaken to study polyesterification mechanisms by deconvolution of the obtained traces. Finally, differential scanning calorimetry, thermogravimetric analysis and cell culture were performed to evaluate the structure–property relationship for the synthesized macromers in comparison with unreacted HTPBD. © 2016 Society of Chemical Industry     

Second-order data obtained from differential pulse voltammetry: Determination of tryptophan at a gold nanoparticles decorated multiwalled carbon nanotube modified glassy carbon electrode

Three-way data obtained from different pulse heights of differential pulse voltammetry (DPV) was analyzed using multivariate curve resolution by alternating least squares (MCR-ALS) algorithm. Differential pulse voltammograms of tryptophan were recorded at a gold nanoparticles decorated multiwalled carbon nanotube modified glassy carbon electrode (GCE/MWCNTs-nanoAu). The determination of tryptophan was performed even in the presence of unexpected electroactive interference(s). Both the simulated and experimental data were non-bilinear. Therefore a potential shift algorithm was used to correct the observed shift in the data. After correction, the data was augmented and MCR-ALS was applied to the augmented data. A relative error of prediction of less than 8% for the determination of the simulated analyte of interest and tryptophan in synthetic samples indicated that the methodology employing voltammetry and second-order calibration could be applied to complex analytical systems.     

Facile and Efficient One-Pot Synthesis of Anthraquinones from Benzene Derivatives Catalyzed by Silica Sulfuric Acid

In connection with our research program directed toward the synthesis of anthraquinones by new catalyst, we achieved a new method for preparation of some anthraquinone derivatives from the reaction of aromatic compounds with phthalic anhydride in the presence of silica sulfuric acid (SSA). The advantages of this method are availability of starting materials, simplicity of the reaction, reusability of catalyst and purity of products. In this reaction, the products were obtained via easy work-up in high yields and short reaction times. The structures of products were assigned by physical data and spectroscopic methods.     

Study of the properties of compatibilized ABS/PA6 blends using response surface methodology

Styrene‐(maleic anhydride) copolymer (SMA) compatibilized blends of acrylonitrile‐butadiene rubber (ABS) and polyamide 6 (PA6) with a variety of compositions and compatibilizer levels were prepared at various screw speeds in a corotating twin screw extruder. A Box–Behnken model for three variables, with three levels, was chosen as an experimental design, and the mechanical properties of the blends were considered as the responses. Each response was analyzed and formulated versus the considered factors by the use of response surface methodology. Impact resistance increased with increased SMA concentration and reduced screw speed. In compatibilized samples, with an increase in PA6 content, higher impact resistance was observed. Increasing PA6 content and SMA concentration, as well as decreasing screw speed, gave improvements in both tensile and flexural strengths. In each case, all of the correlations among factors were studied. Grafting of SMA was proved by detecting the graft copolymer (SMA‐PA6) formed through extraction in formic acid and FTIR spectroscopy. Compared with uncompatibilized blends, compatibilized samples displayed more uniform and finer particle sizes, thereby proving the compatibilizing effect of the graft copolymer. The asymmetry trend in dispersed particle size before and after the phase inversion became more differentiated in the presence of the compatibilizer. Adding SMA lowered the phase inversion composition (based on PA6), whereas higher screw speed increased it. J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers     

Statistical optimization of experimental parameters for synthesis of manganese carbonate and manganese oxide nanoparticles

Taguchi robust design was used for optimization of direct precipitation reaction conditions in order to simple and fast synthesis of manganese carbonate nanoparticles. Manganese carbonate nanoparticles were synthesized in this study by addition of manganese ion solution to the aqueous carbonate reagent. Effects of several reaction variables, such as manganese and carbonate concentrations, flow rate of reagent addition and temperature on particle size of prepared manganese carbonate were investigated. The significance of these parameters in tuning the size of manganese carbonate particles was quantitatively evaluated by analysis of variance. The results showed that manganese concentration and carbonate concentration in the solutions and also flow rate have significant effects in preparation of manganese carbonate nanoparticles. Also, optimum conditions for synthesis of manganese carbonate nanoparticles via precipitation reaction were proposed. Analysis of variance showed that under the optimum condition, the size of manganese carbonate nanoparticles will be about 54 ± 12 nm. In another part of this study, solid state thermal decomposition reaction of precursor was used for preparation of Mn₂O₃ nanoparticles. The results showed that Mn₂O₃ nanoparticles synthesized via thermal decomposition of manganese carbonate nanoparticles have average size of 90 nm.     

Improving performance of node clustering in wireless sensor networks using meta-heuristic algorithms and a novel validity index

The use of wireless sensor networks has significantly increased in the last decade. These networks consist of a large number of small sensors, which are efficient tools for data collection from different environments. The data collected by these sensors will be usually transmitted to a base station that will provide the end user’s data. In order to improve scalability of such networks, sensor nodes can be grouped into non-overlapped clusters. These clusters create a hierarchical design in wireless sensor networks that leads to better energy utilization and thus increase the network’s lifetime. Using validity indexes and meta-heuristic algorithms are common ways to improve performance of clustering. In this paper, we provide a new validity index called ASCS by enhancing the Chou and Su (CS) validity index, and improve the performance of the meta-heuristic algorithms for clustering using this new validity index as their objective functions. Differential evolution and harmony search are two algorithms that will be used for this purpose. The experimental results show the better performance of ASCS index comparing to Davies and Bouldin (DB) and CS validity indexes in determining appropriate number of clusters and determining proper clusters’ members.

     

Properties of waste‐poly(ethylene terephthalate)/acrylonitrile butadiene styrene blends compatibilized with maleated acrylonitrile butadiene styrene

Waste poly(ethylene terephthalate) (W‐PET)/acrylonitrile‐butadiene‐styrene (ABS) blends were prepared with a variety of compositions at several rotor speeds in an internal mixer, replacing ABS with different maleated ABS (ABS‐g‐MA) samples in compatibilized blends. A Box–Behnken model for three variables, with three levels, was chosen for the experimental design. ABS‐g‐MA‐based samples exhibited finer particles with a more uniform particle size distribution than ABS‐based ones, as a consequence of the compatibilizing process. Rheological results implied a greater elastic nature for compatibilized blends which increased in the presence of more ABS content; the same trend was observed for complex viscosity. With increasing ABS‐g‐MA or MA concentration, more shear thinning behavior was observed similar to that of ABS; whereas the uncompatibilized blends showed Newtonian behavior like that of W‐PET. The observed shifting in T_gW‐PET and T_gABS obtained from dynamic mechanical thermal analysis confirmed the good compatibility in W‐PET/ABS‐g‐MA blends in contrast with that in ordinary W‐PET/ABS blends. The mechanical properties were measured and modeled versus the various factors considered in a response surface methodology. The experimental data found a good fit with the obtained equation models. The mechanical properties of the compatibilized blends showed a large positive deviation from the mixing rule, while the uncompatibilized samples had lower properties, even compared to those predicted by the mixing rule. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Fabrication of a novel electrochemiluminescence glucose biosensor using Au nanoparticles decorated multiwalled carbon nanotubes

Au nanoparticles (nanoAu) with an average diameter of 60 nm were decorated on the surface of multiwalled carbon nanotubes to prepare MWCNTs-nanoAu nano-hybrids. The MWCNTs-nanoAu nano-hybrids were cast on the surface of a glassy carbon electrode and were then further modified with a layer comprising glucose oxidase and chitosan to fabricate a novel electrochemiluminescence (ECL) glucose biosensor. The biosensor showed a remarkably improved electrocatalytic activity towards luminol oxidation and significant improvement in its ECL response. The proposed ECL biosensor exhibited excellent performance for glucose detection with a wide linear range (1-1000 μM), low detection limit (0.5 μM), excellent reproducibility (0.5%) and satisfactory selectivity.