Design and evaluation of an LQI-based beaconless routing protocol for a heterogeneous MSN

Wireless Networks - In a mobile sensor network with a mobile sink, choosing the next hop depends on the current location of the sink. This necessitates a frequent update of routing paths within the...     

Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum–Graphite Composite

Russian Journal of Non-Ferrous Metals - In this research, the mechanical and tribological behavior of aluminum–graphite (Al–Gr) composite has been investigated in order to determine the...     

Thermomechanical and Interfacial Properties of Calcium Alginate Fiber-Reinforced Polypropylene Composites

Polypropylene (PP) matrix calcium alginate fiber reinforced unidirectional composites (10% fiber by weight) were fabricated by compression molding. Tensile strength (TS), tensile modulus (TM), bending strength (BS), bending modulus (BM), and impact strength (IS) were found to be 26 MPa, 950 MPa, 38 MPa, 1320 MPa, and 20 kJ/m², respectively. Degradation tests of composites were performed for 6 weeks in soil and it was found that composites retained almost 75% of its original strength. The interfacial properties of the composite were investigated by using single fiber fragmentation test (SFFT) and by scanning electron microscope (SEM).     

Null steering in rectangular planar arrays by amplitude control using genetic algorithms

Null steering in rectangular planar arrays has been achieved when only the amplitudes of the array elements are perturbed. Genetic algorithms were employed to solve the problem of null steering in uniform and Chebyshev planar arrays. Mathematical expressions for the planar array factor were derived from the linear array factor expression. The results show that nulls can be accurately steered to the required real space directions with the minimal disturbance to the other array parameters and at the same time achieve any prescribed null depth.     

Effects of substrate surface finish and substrate material on durability of thermally sprayed WC cermet coating in rolling with sliding contact

In this study, using a two-roller testing machine, the authors examined the surface durability of thermally sprayed WC-Cr-Ni cermet coating in lubricated rolling with sliding contact conditions. The coating was formed onto the axially ground, blasted and circumferentially ground roller specimens made of a thermally refined carbon steel or an induction hardened carbon steel by means of the high energy type flame spraying (Hi-HVOF) method. The WC cermet coated roller finished to a mirror-like condition was mated with the carburized steel roller without coating having a surface roughness of Ry=3.05.0 μm. In the experiments, a maximum Hertzian stress of P_H=0.6 or 0.8 GPa was applied for the thermally refined carbon steel roller and P_H=1.4 GPa was applied for the induction hardened carbon steel roller in line contact condition. As a result, it was found that in the case of induction hardened steel substrate, the coated roller generally exhibits a long life without any serious damage and the surface durability is hardly affected by the substrate surface finish, while in the case of thermally refined steel substrate, the durability of coated roller is lowered and the life to flaking is very short particularly when the substrate surface is circumferentially ground and the mating surface is rough. The surface durability of coated roller was also compared with the durability of steel roller without coating. Finally, in order to discuss the durability of coated roller, the elastic-plastic behavior of the subsurface layer under repeated rolling with sliding contact was analyzed using a finite element method (FEM).