Kinetic analysis of crystallization of zeolite beta synthesized by direct heating

To quantitatively investigate the initial crystallization of zeolite beta synthesized by direct heating, the extent of the reaction was precisely evaluated by X-ray diffraction measurements and Rietveld structural refinement, and a kinetic analysis of crystallization was performed using the Avrami-Erofe'ev equation. The activation energy for crystallization was lower than that for hydrothermal synthesis. Reaction and synthesis time curves revealed that the initial zeolite beta crystallization consisted of three stages. The first was an induction period with nucleation by the generation of building units and the formation of an initial coordinated structure. The second stage was crystal growth by a diffusion-controlled reaction, and the third stage involved slowing down of crystallization by the limitation of dehydrocondensation. These stages could be analyzed by calculation of the rate constant and Avrami exponent for each stage.     

Quantitative risk assessment using a Japanese hydrogen refueling station model

Although hydrogen refueling stations (HRSs) are becoming widespread across Japan and are essential for the operation of fuel cell vehicles, they present potential hazards. A large number of accidents such as explosions or fires have been reported, rendering it necessary to conduct a number of qualitative and quantitative risk assessments for HRSs. Current safety codes and technical standards related to Japanese HRSs have been established based on the results of a qualitative risk assessment and quantitative effectiveness validation of safety measures over ten years ago. In the last decade, there has been much development in the technologies of the components or facilities used in domestic HRSs and much operational experience as well as knowledge to use hydrogen in HRSs safely have been gained through years of commercial operation. The purpose of the present study is to conduct a quantitative risk assessment (QRA) of the latest HRS model representing Japanese HRSs with the most current information and to identify the most significant scenarios that pose the greatest risks to the physical surroundings in the HRS model. The results of the QRA show that the risk contours of 10^?3 and 10^?4 per year were confined within the HRS boundaries, whereas the risk contours of 10^?5 and 10^?6 per year are still present outside the HRS. Comparing the breakdown of the individual risks (IRs) at the risk ranking points, we conclude that the risk of jet fire demonstrates the highest contribution to the risks at all of the risk ranking points and outside the station. To reduce these risks and confine the risk contour of 10^?6 per year within the HRS boundaries, it is necessary to consider risk mitigation measures for jet fires.     

Ionization efficiency of evolved gas molecules from aerosol particles in a thermal desorption aerosol mass spectrometer: Laboratory experiments

Thermal desorption aerosol mass spectrometers (TDAMSs) with electron ionization are widely used for quantitative analysis of aerosol chemical composition, and the ionization efficiency of evolved gas molecules from aerosol particles is an important parameter for such analysis. We performed laboratory experiments using a custom-made TDAMS to investigate the key factors affecting ionization efficiency. Ammonium chloride (NH₄Cl) and ammonium iodide (NH₄I) were used as test compounds because their thermal decomposition products are expected to be simple (dominated by ammonia (NH₃) and hydrogen halide (HX)). The ion signals originating from NH₃ and HX were measured by altering the position of the ionizer relative to the vaporization point. The ratio of ion signal from NH₃ to that from HX increased with increasing divergence angle of evolved gas plumes, which suggests that the angular distribution of gas molecules could be an important factor affecting the ionization efficiency.

Copyright © 2018 American Association for Aerosol Research     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

The Twisting Paths to Planning Reform in Scotland

In the context of modernization in the public sector and the reforms of land use planning practices, this article traces the paths followed in Scotland to articulate an appropriate agenda for change to create a modern planning system. Fundamental to this drive for public sector reform is devolution, and the search to articulate an appropriate form of state apparatus for a modern Scottish state. Context, however, is all-important. Research and extensive consultation have paved the path to a planning White Paper, Modernizing the Planning System, and a draft Planning Bill. This article examines the archaeology of the Scottish road to reform, and considers the nature of the changing practices associated with devolution in Scotland.

We are therefore determined to build a planning system that balances the right of individuals to develop their property and the interests of the wider community. This White Paper outlines our detailed proposals for modernisation of the planning system, to secure greater fairness and equity, a system where everyone's views are listened to and taken proper account of.

First Minister, Jack McConnell, 2005 McConnell, J. 2005. “Scottish Executive”. In Modernising the Planning System: A White Paper, Edinburgh: Scottish Executive.  [Google Scholar]     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Towards an end-to-end airborne remote-sensing system for post-hazard assessment of damage to hyper-critical infrastructure: research progress and needs

The objective of this article is to synthesize research findings and requirements pertaining to development of time-sensitive remote-sensing systems (TSRSS) that support decision-making pertaining to post-hazard assessment of damage to what we define as hyper-critical infrastructure (HCI), based on an aerial imaging approach known as repeat station imaging (RSI). The following TSRSS components are addressed and related findings are reported: (1) understanding information requirements of emergency managers pertaining to damage of HCI; (2) flight planning and data capture requirements for supporting bi-temporal RSI pairs; (3) automatic image registration and shadow classification and normalization routines applied to RSI pairs; (4) damage detection and delineation approach that exploits simple temporal differences in image brightness to automatically, reliably, and robustly delineates new cracks associated with damage; and (5) rapid data and information transfer to emergency managers. The highest priority follow-on research topics are: (1) integrating small unmanned aerial systems (sUAS) with the RSI approach, while enabling multiple view perspectives other than vertical (i.e. nadir pointing) and (2) developing and testing of machine learning routines for automatic identification of damage features from RSI pairs, particularly those captured from integrated sUAS–RSI.