Role of Endocrine-Disrupting Chemicals in the Pathogenesis of Non-Alcoholic Fatty Liver Disease: A Comprehensive Review

Non-alcoholic fatty liver disease (NAFLD) is considered the most common liver disorder, affecting around 25% of the population worldwide. It is a complex disease spectrum, closely linked with other conditions such as obesity, insulin resistance, type 2 diabetes mellitus, and metabolic syndrome, which may increase liver-related mortality. In light of this, numerous efforts have been carried out in recent years in order to clarify its pathogenesis and create new prevention strategies. Currently, the essential role of environmental pollutants in NAFLD development is recognized. Particularly, endocrine-disrupting chemicals (EDCs) have a notable influence. EDCs can be classified as natural (phytoestrogens, genistein, and coumestrol) or synthetic, and the latter ones can be further subdivided into industrial (dioxins, polychlorinated biphenyls, and alkylphenols), agricultural (pesticides, insecticides, herbicides, and fungicides), residential (phthalates, polybrominated biphenyls, and bisphenol A), and pharmaceutical (parabens). Several experimental models have proposed a mechanism involving this group of substances with the disruption of hepatic metabolism, which promotes NAFLD. These include an imbalance between lipid influx/efflux in the liver, mitochondrial dysfunction, liver inflammation, and epigenetic reprogramming. It can be concluded that exposure to EDCs might play a crucial role in NAFLD initiation and evolution. However, further investigations supporting these effects in humans are required.     

Parastrephia quadrangularis: A Possible Alternative to Inhibit the Microbial Effect on the Generation of Acid Mine Drainage

Mine Water and the Environment - The role of iron- and sulfur- oxidizing microorganisms in the generation of acid mine drainage (AMD) from sulfide ores and tailings is widely recognized. The...     

Perovskite-type oxides in methane dry reforming: Effect of their incorporation into a mesoporous SBA-15 silica-host

A series of Ni-based perovskite-type oxides LaNiO₃, La_0.8Ca_0.2NiO₃ and La_0.8Ca_0.2Ni_0.6Co_0.4O₃, were synthesized as catalyst precursors both bulk and built-in a highly ordered mesoporous SBA-15 silica-host with the aim of using them as heterogeneous catalysts in syngas production by the methane dry reforming with CO₂. The solids were characterized by means of FT-IR, XRD, BET surface area and TPR techniques. All synthesized oxides showed a perovskite-type structure. Incorporation of the oxides into the mesoporous silica-host generates a higher metal–support interaction increasing the Ni reduction temperature. A decrease in CH₄ and CO₂ conversion was observed when a second cation in A- and/or B-site was added to the bulk perovskite. The built-in of these solids in the SBA-15 mesoporous silica-host allows working at lower temperature with an increase in conversions and selectivity towards syngas which represent an attractive perspective for industrial application.     

Luster Pottery from the Thirteenth Century to the Sixteenth Century: A Nanostructured Thin Metallic Film

Luster is a decorative metallic film that was applied on the surface of medieval glazed pottery. It can be obtained via the low-temperature (∼650°C), controlled reduction of copper and silver compounds. In this paper, we show that luster is a thin layered film (200–500 nm thick) that contains metallic spherical nanocrystals dispersed in a silicon-rich matrix and has a metal-free outermost glassy layer that is 10–20 nm thick. Silver nanocrystals seem to be separated from those of copper, forming aggregates 5–100 μm in diameter. This composite structure exhibits optical properties that are dependent on both the particle size and the matrix. Luster is indeed the first reproducible nanostructured thin metallic film that was made by humans.     

A comparative study of zirconium and titanium implants in rat: osseointegration and bone material quality

Permanent metal implants are widely used in human medical treatments and orthopedics, for example as hip joint replacements. They are commonly made of titanium alloys and beyond the optimization of this established material, it is also essential to explore alternative implant materials in view of improved osseointegration. The aim of our study was to characterize the implant performance of zirconium in comparison to titanium implants. Zirconium implants have been characterized in a previous study concerning material properties and surface characteristics in vitro, such as oxide layer thickness and surface roughness. In the present study, we compare bone material quality around zirconium and titanium implants in terms of osseointegration and therefore characterized bone material properties in a rat model using a multi-method approach. We used light and electron microscopy, micro Raman spectroscopy, micro X-ray fluorescence and X-ray scattering techniques to investigate the osseointegration in terms of compositional and structural properties of the newly formed bone. Regarding the mineralization level, the mineral composition, and the alignment and order of the mineral particles, our results show that the maturity of the newly formed bone after 8 weeks of implantation is already very high. In conclusion, the bone material quality obtained for zirconium implants is at least as good as for titanium. It seems that the zirconium implants can be a good candidate for using as permanent metal prosthesis for orthopedic treatments.     

Evaluation of near-infrared reflectance spectroscopy for predicting stover quality trait in semi-exotic populations of maize

Near-infrared reflectance spectroscopy (NIRS) analysis was investigated as a means of predicting quality parameters in semi-exotic maize stover. These parameters included crude protein (CP), neutral detergent fibre, acid detergent fibre and in vitro dry matter digestibility (IVDMD). Samples of semi-exotic maize stover were collected during three growing seasons (1989, 1990, 1991) from three locations in Catalonia, Spain. Calibration equations were obtained by multiple linear regression of conventional laboratory values on NIRS data from 84 samples and verified with 20 additional samples. Separate NIRS calibration were developed also within year (1989 and 1990, respectively). A Bran + Luebbe InfraAnalyzer model 450 was used for the study. In the multi-year calibration the coefficients of squared multiple correlation (R²) ranged from 0–81 for IVDMD to 0–92 for CP and the standard errors of calibration (SEC) ranged from 0–35 for CP to 1–46 for IVDMD. The study showed that NIRS analysis can be used to evaluate the quality of semi-exotic maize in breeding programmes.     

Knowledge base specification to automate the fluid critical point of fluids

In this paper an analytical procedure implemented to structure the knowledge required by an expert system applied for controlling a chemical process is described. The analytical approach is based on L ifecycle of Systems and on Task Model approaches. It was validated with an experimental procedure related to the determination of the critical point of pure fluids (CO₂, N₂O, SF₆) and mixtures of low concentration (CO₂-limonene). For the implementation of the control system an expert system shell (CHRONOS?) was used.     

On the physical interpretation of the Kawakita and Adams parameters derived from confined compression of granular solids

The objective of this paper was to investigate the physical significance of the Kawakita and Adams parameters derived from the compression of some granular solids. Four model granules of different expected deformation behaviour were prepared by varying the composition and porosity of the granules. The granules were nearly spherical and of similar size and showed a variation in mechanical properties in terms of their elasticity, plasticity, fracture strength and brittleness. Due to the size and shape of the granules, compression due to granule rearrangement was generally limited. The Kawakita a parameter approximated the maximal engineering strain of the granular solids and both the Kawakita a and b^− 1 parameter reflected the plasticity of the granules. The Adams parameter τ₀ seemed to reflect the initial cracking of granules. Thus, the combined use of the Kawakita parameters a and b^− 1 and the Adams parameter τ₀ may give a comprehensive representation of the compression behaviour of granular solids.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).