RTK工程放样方法在大比例尺数字测图中的应用

结合工程实例,对在空旷平坦的地块进行大比例尺数字测图时,利用RTK技术进行细部地物测量,辅以工程放样的方法测量地形点,并对测图作业的方法进行了探讨。     

金华山煤矿大口径瓦斯抽排孔施工技术

为了减少煤矿瓦斯的危害以及对其综合利用,国家鼓励并大力支持大口径瓦斯抽排孔项目的建设。陕西铜川金华山煤矿一口大口径瓦斯抽排孔,孔径850 mm,终孔深度401.6 m。从钻进方法、钻具级配、钻进技术参数、冲洗液、圆孔、溜孔、井底护管安装固结、充填循环泥浆、下管、固管、透孔放水等方面详细地介绍了大口径瓦斯抽排孔小径透巷后的特殊施工工艺和相关的技术措施。     

豫西矿集区幔枝构造约束下的小岩体成大矿

文章通过分析豫西地区的大量地质矿产资料后发现,区内存在"小岩体成大矿"的规律。认为豫西地区自燕山期以来,随着地幔热柱的演化,区内地壳运动转为伸展活动,地壳减薄、地幔不均衡上隆和中酸性岩浆脉动式上侵;中酸性岩浆脉动式上侵过程打通了深部成矿物质上升的通道,使得含矿流体能够到达地壳上部,并在幔枝构造外围主次级拆离带、岩体内外接触带、构造裂隙等适宜部位集聚成矿。     

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.     

Estimating bed material fluxes upstream and downstream of a controlled large bifurcation - the Mississippi-Atchafalaya River diversion

Bed material transport at river bifurcations is crucial for channel stability and downstream geomorphic dynamics. However, measurements of bed material transport at bifurcations of large alluvial rivers are difficult to make, and standard estimates based on the assumption of proportional partitioning of flow and bedload transport at bifurcations may be erroneous. In this study, we employed a combined approach based on observed topographic change (erosion/deposition) and bed material transport predicted from a one-dimensional model to investigate bed material fluxes near the engineering-controlled Mississippi-Atchafalaya River diversion, which is of great importance to sediment distribution and delivery to Louisiana's coast. Yang's (1973) sediment transport equation was utilized to estimate daily bed material loads upstream, downstream, and through the diversion during 2004–2013. Bathymetric changes in these channels were assessed with single beam data collected in 2004 and 2013. Results show that over the study period, 24% of the Mississippi River flow was diverted into the Atchafalaya River, while the rest remained in the mainstem Mississippi. Upstream of the diversion, the bed material yield was predicted to be 201 million metric tons (MT), of which approximately 35 MT (i.e., 17%) passed through the bifurcation channel to the Atchafalaya River. The findings from this study reveal that in the mainstem Mississippi, the percentage of bed material diversion (83%) is larger than the percentage of flow diversion (76%); Conversely, the diversion channel receives a disproportionate amount of flow (24%) relative to bed material supply (17%). Consequently, severe bed scouring occurred in the controlled Outflow Channel to the Atchafalaya River, while riverbed aggradation progressed in the mainstem Mississippi downstream of the diversion structures, implying reduced flow capacity and potential risk of a high backwater during megafloods. The study demonstrates that Yang's sediment transport equation provides plausible results of bed material fluxes for a highly complicated large river diversion, and that integration of the sediment transport equation with observed morphological changes in riverbed is a valuable approach to investigate sediment dynamics at controlled river bifurcations.     

Riverine large wood and recreation safety: A framework to discretize and contextualize hazard

The importance of large wood (LW) to riverine functions is well established scientifically and increasingly recognized by river managers in many countries. However, public perceptions largely associate LW with elevated danger and/or need for intervention. Such perspectives are amplified amongst recreational river users (defined here as any individuals that recreate by floating on the water surface of a river) who interact more directly with rivers than the general public and commonly view wood in life-or-death terms. Given that human life occupies a highest-order charge for river managers, they are left in a difficult position when safety appears to conflict with environmental services. LW deficits are perpetuated partly because wood removal, often in the name of safety, is far easier than placing wood in rivers. Further, river restoration practitioners are frequently burdened with expectations and liability unparalleled in built environments. A fundamentally different mindset is necessary to achieve desired ecologic outcomes when working with rivers. Based on two decades of experience as boaters, LW practitioners, and emergency responders, we (1) discuss LW hazard and risk from recreational and management viewpoints, (2) discretize objective and measurable physical properties of LW hazards, and (3) propose a decision framework that implicitly addresses risk by considering LW hazards relative to river use and ambient hazards. The approach is structured to increase objectivity in LW hazard mitigation and diminish asymmetric biases that favor LW removal. Our intent is to build understanding and rational flexibility among risk-averse management, regulatory, and funding entities to facilitate implementation of scientific understanding without undue risk to river users. © 2020 John Wiley & Sons, Ltd.     

Identification of factors influencing hydrologic model performance using a top-down approach in a large number of U.S. catchments

Investigating the performance that can be achieved with different hydrological models across catchments with varying characteristics is a requirement for identifying an adequate model for any catchment, gauged or ungauged, just based on information about its climate and catchment properties. As parameter uncertainty increases with the number of model parameters, it is important not only to identify a model achieving good results but also to aim at the simplest model still able to provide acceptable results. The main objective of this study is to identify the climate and catchment properties determining the minimal required complexity of a hydrological model. As previous studies indicate that the required model complexity varies with the temporal scale, the study considers the performance at the daily, monthly, and annual timescales. In agreement with previous studies, the results show that catchments located in arid areas tend to be more difficult to model. They therefore require more complex models for achieving an acceptable performance. For determining which other factors influence model performance, an analysis was carried out for four catchment groups (snowy, arid, and eastern and western catchments). The results show that the baseflow and aridity indices are the most consistent predictors of model performance across catchment groups and timescales. Both properties are negatively correlated with model performance. Other relevant predictors are the fraction of snow in the annual precipitation (negative correlation with model performance), soil depth (negative correlation with model performance), and some other soil properties. It was observed that the sign of the correlation between the catchment characteristics and model performance varies between clusters in some cases, stressing the difficulties encountered in large sample analyses. Regarding the impact of the timescale, the study confirmed previous results indicating that more complex models are needed for shorter timescales.     

无人机技术在海岛测绘中的应用

为提高海岛测绘的技术手段，将无人机引入海岛地形调查中，以Swallow-P小型固定翼无人机开展惠州市大亚湾虎洲海岛大比例尺测图为例，系统归纳了无人机外业数据采集与内业数据处理的具体流程，并制作了DEM和DOM成果；经过实测地面点精度分析得出虎洲无人机大比例尺测图成果平面位置中误差和高程中误差符合1∶1000测图精度要求。     

Late Holocene slip rate and average recurrence interval of great earthquakes on the Shangzhi segment of the Yilan‐Yitong Fault Zone,northeastern China: Constraints from paleo‐earthquakes and historical written records

The Yilan‐Yitong Fault Zone (YYFZ) is considered to be the key branch of the Tancheng‐Lujiang Fault Zone (TLFZ) in northeastern China. Although the Mesozoic and early Cenozoic deformation of the YYFZ has been studied intensively over the past century, few estimates of slip rate and recurrence interval of large earthquakes in the late Quaternary, which are the two most important parameters for understanding the potential seismic hazard of this crucial structure, were obtained. Based on integrated interpretations of high resolution satellite images and detailed geologic and geomorphic mapping, linear landforms were identified, including fault scarps and troughs, along the Shangzhi segment of the YYFZ, which exceeds 25 km in length. Synthesized results of trench excavations and differential GPS measurements of terrace surfaces indicate that two events (E1, E2) occurred along the Shangzhi segment during the late Holocene, which resulted in 3.2 ±0.1 m of total vertical co‐seismic displacement with clear features of thrust motion. ¹⁴C dating of samples suggests that event E1 occurred between 440 ±30 years BP and 180 ±30 years BP and that event E2 occurred between 4 090 ±30 years BP and 3 880 ±30 years BP, which indicates that the minimum vertical slip rate of the Shangzhi segment of the YYFZ has been approximately 0.8 ±0.03 mm/year during the late Holocene. Constraints from paleo events and the slip rate suggest that the average recurrence interval of major earthquakes on the YYFZ is 3 800 ±200 years. Historical documents in Korea show that event E1 possibly corresponds to the earthquake that occurred in AD 1810 (the Qing Dynasty in Chinese history) in the Ningguta area, which had surface‐wave magnitude (Ms) of 6.8–7.5. Studies of kinematics show that the right‐lateral strike‐slip with a reverse component has been dominant along the YYFZ during the late Holocene.     

Using Mesoproterozoic sedimentary geochemistry to reconstruct basin tectonic geography and link organic carbon productivity to nutrient flux from a Northern Australian large igneous Province

The Beetaloo Sub-basin, northern Australia, is considered the main depocentre of the 1,000-km scale Mesoproterozoic Wilton package of the greater McArthur Basin – the host to one of the oldest hydrocarbon global resources. The ca. 1.40–1.31 Ga upper Roper Group and the latest Mesoproterozoic to early Neoproterozoic unnamed group of the Beetaloo Sub-basin, together, record ca. 500 million years of depositional history within the North Australia Craton. Whole-rock shale Sm–Nd and Pb isotope data from these sediments reveal sedimentary provenance and their evolution from ca. 1.35 to 0.85 Ga. Furthermore, these data, together with shale major/trace elements data from this study and pyrolysis data from previous publications, are used to develop a dynamic tectonic geography model that links the organic carbon production and burial to an enhanced weathering of nutrients from a large igneous province. The ca. 1.35–1.31 Ga Kyalla Formation of the upper Roper Group is composed of isotopically evolved sedimentary detritus that passes up, into more isotopically juvenile Pb values towards the top of the formation. The increase in juvenile compositions coincides with elevated total organic carbon (TOC) contents of these sediments. The coherently enriched juvenile compositions and TOC the upper portions of the Kyalla Formation are interpreted to reflect an increase in nutrient supply associated with the weathering of basaltic sources (e.g. phosphorous). Possible, relatively juvenile, basaltic sources include the Wankanki Supersuite in the western Musgraves and the Derim Derim–Galiwinku large igneous province (LIP). The transition into juvenile, basaltic sources directly before a supersequence-bounding unconformity is here interpreted to reflect uplift and erosion of the Derim Derim–Galiwinku LIP, rather than an influx of southern Musgrave sources. A new baddeleyite crystallisation age of 1,312.9 ± 0.7 Ma provides both a tight constraint on the age of this LIP, along with its associated magmatic uplift, as well as providing a minimum age constraint for Roper Group deposition. The unconformably overlying lower and upper Jamison sandstones are at least 300 million years younger than the Kyalla Formation and were sourced from the Musgrave Province. An up-section increase in isotopically juvenile compositions seen in these rocks is interpreted to document the progressive exhumation of the western Musgrave Province. The overlying Hayfield mudstone received detritus from both the Musgrave and Arunta regions, and its isotopic geochemistry reveals affinities with other early Neoproterozoic basins (e.g. Amadeus, Victoria and Officer basins), indicating the potential for inter-basin correlations.