山东平邑石膏矿矿难大口径救援钻孔施工技术

2015年“12.25”平邑矿难钻孔救援是我国首例通过钻孔救生的成功案例。由于地层不断坍塌变形,导致了复杂地层条件的产生,给救援钻孔的施工带来极大困难。针对这一特殊情况,采用空气反循环钻井工艺技术,处理钻孔事故时采用气举反循环工艺技术。总结了大口径钻孔施工经验,对今后施工大口径救援钻孔提出有待改进的问题和建议。     

Interlinking the Hotspot Track in the Arctic and its Implications for Paleo-plate Reconstrution

The Siberian–Icelandic hotspot track is the only preserved continental hotspot track. Although the track and its associated age progression between 160 Ma and 60 Ma are not yet well understood, this section of the track is closely linked to the tectonic evolution of Amerasian Basin, the Alpha-Mendeleev Ridge and Baffin Bay. Using paleomagnetic data, volcanic structures and marine geophysical data, the paleogeography of Arctic plates (Eurasian plate, North American Plate, Greenland Plate and Alaska Microplate) was reconstructed and the Siberian–Icelandic hotspot track was interlinked between 160 Ma and 60 Ma. Our results suggested that the Alpha-Mendeleev Ridge could be a part of the hotspot track that formed between 160 Ma and 120 Ma. During this period, the hotspot controlled the tectonic evolution of Baffin Bay and the distribution of mafic rock in Greenland. Throughout the Mesozoic Era, the aforementioned Arctic plates experienced clockwise rotation and migrated northeast towards the North Pacific. The vertical influence from the ancient Icelandic mantle plume broke this balance, slowing down some plates and resulting in the opening of several ocean basins. This process controlled the tectonic evolution of the Arctic.     

大规模GNSS基准站网快速同步处理方法研究

目前我国GNSS连续运行基准站网已基本建设完毕,全国范围内建设完成约2000个GNSS连续运行基准站。随着站点规模的加大,数据计算的效率也迫切需要提高,采用传统的高精度数据处理软件已适应不了大规模GNSS网的数据解算要求。本文基于BERNESE5.2软件研究了我国“陆态网络工程”260个基准站的大规模GNSS网同步数据处理方法,通过修改源程序及利用并行计算技术,成功实现了陆态网络基准站快速、高效、高精度的数据计算能力。实例验证表明,陆态网络单天260个站的数据在无需分区的情况下,可在1 h内获得全球框架下的约束解,解算的框架点坐标精度在毫米量级,大大提高了国家数据中心的大规模GNSS网数据处理能力。     

大范围网络RTK基准站间整周模糊度实时快速解算

网络RTK是目前实现高精度实时动态定位的重要手段之一,而网络RTK高精度定位的关键问题是基准站间整周模糊度的实时快速准确固定。对于大范围网络RTK,由于基准站间距离的增加,电离层延迟误差、对流层延迟误差和卫星轨道误差相关性降低,导致基准站间整周模糊度不能快速准确地固定,因此本文提出了一种大范围网络RTK基准站间整周模糊度固定算法。该算法首先利用L1、L2载波相位观测值和P1、P2伪距观测值解算基准站间的双差宽巷模糊度;然后采用Saastamoinen模型和Chao映射函数模型相结合解算双差对流层延迟误差,并将双差宽巷模糊度作为L1、L2双差载波相位整周模糊度的约束关系来确定L1、L2双差载波相位整周模糊度;最后采用CORS站的实测数据进行试验,并将本文的试验结果同GAMIT软件的解算结果进行比对,结果表明该算法可以快速准确地实现单历元双差载波相位整周模糊度的固定。     

砂土海床中大直径单桩水平承载与变形特性

通过室内三轴固结排水剪切试验等获得典型剪胀性砂土的力学参数,在此基础上利用有限元软件ABAQUS,开展了近海大直径单桩基础在水平荷载作用下的三维有限元数值分析,揭示了加载过程中桩周土的应力路径,探讨了桩周土内摩擦角、剪胀角及桩土接触面特性等对三维数值分析结果的影响,得到了离心模型试验的验证,进而提出了砂土海床中大直径单桩基础的合理数值分析模型及参数取值方法,并建议风机大直径单桩基础水平承载力确定以变形作为控制标准。在此基础上,利用该数值分析模型分析了现有桩基承载力和变形分析方法对超大直径单桩的有效性,并提出了采用数值分析来确定基础的临界埋深的确定方法。     

A call for Australian loess: discussion and commentary

A study of loess in Australia brings the idea of 'desert' loess back into view. Production of particles in deserts still presents problems, but deserts do make adequate storage regions for loess particles – usually produced in adjacent mountains. Straightforward for Central Asia or China (a particle source in High Asia and convenient deserts en route to eventual deposition), but the Sahara and Australian deserts traditionally present problems. If loess material is allowed to be silt-sized clay agglomerate particles as well as the usual clastic primary minerals, then loess in Australia seems reasonable. Loess acquires its remarkable loessic qualities via aeolian deposition – the nature of the particles is perhaps of lesser importance. A more generalised approach to airborne sediments might be attempted, with two major types of suspension material recognised: large dust (maybe coarse and very coarse silt, say 20–60 µm, or perhaps 4–6 phi) and small dust (fine and very fine silt, 2–8 µm, 7–9 phi). Loess is made from large dust.     

Dynamic response and optimal design of structures with large mass ratio TMD

This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd.     

Optimal precursor of the transition from Kuroshio large meander to straight path

We used the conditional nonlinear optimal perturbation(CNOP) method to explore the optimal precursor of the transition from Kuroshio large meander(LM) to straight path within a barotropic inflowoutflow model,and found that large amplitudes of the optimal precursor are mainly located in the east of Kyushu,which implies that perturbations in the region are important for the transition from LM to straight path.Furthermore,we investigated the transition processes caused by the optimal precursor,and found that these processes could be divided into three stages.In the first stage,a cyclonic eddy is advected to the formation region of the Kuroshio large meander,which enhances the LM path and causes a cyclonic eddy to shed from the Kuroshio mainstream.This process causes the LM path to change into a small meander path.Subsequently,the small meander is maintained for a period because the vorticity advection is balanced by the beta effect in the second stage.In the third stage,the small meander weakens and the straight path ultimately forms.The positive vorticity advecting downstream is responsible for this process.The exploration of the optimal precursor will conduce to improve the prediction of the transition processes from LM path to straight path,and its spatial structure can be used to guide Kuroshio targeted observation studies.     

Log‐jams and avulsions in the San Antonio River Delta,Texas

The San Antonio River Delta (SARD), Texas, has experienced two major avulsions in the past 80 years, and a number of other historical and Holocene channel shifts. The causes and consequences of these avulsions – one of which is ongoing – were examined using a combination of fieldwork, geographic information system (GIS) analysis, and historical information to identify active, semi‐active, and paleochannels and the sequence of shifting flow paths through the delta. The role of deposition patterns and antecedent morphology, large woody debris jams, and tectonic influences were given special attention. Sedimentation in the SARD is exacerbated by tectonic effects. Channel aggradation is ubiquitous, and superelevation of the channel bed above the level of backswamp areas on the floodplain is common. This creates ideal setup conditions for avulsions, and stable, cohesive fine‐grained banks favor avulsions rather than lateral migration. Flood basins between the alluvial ridges associated with the aggraded channels exist, but avulsions occur by re‐occupation of former channels found within or connected to the flood basins. Large woody debris and channel‐blocking log‐jams are common, and sometimes displace flow from the channel, triggering crevasses. However, a large, recurring log‐jam at the site of the ongoing avulsion from the San Antonio River into Elm Bayou is not responsible for the channel shift. Rather, narrow, laterally stable channels resulting from flow splits lead to accumulation of wood. Some aspects of the SARD avulsion regime are typical of other deltas, while others are more novel. These includes avulsions involving tributaries and subchannels within the delta as well as from the dominant channel; tectonic influences on delta backstepping and on channel changes within the delta; avulsions as an indirect trigger for log‐jam formation (as well as vice‐versa); and maintenance of a multi‐channel flow pattern distinct from classic anastamosing or distributary systems. Copyright © 2012 John Wiley & Sons, Ltd.     

大川中地区须家河组层序-岩相古地理研究

四川盆地上三叠统须家河组油气勘探开始于20世纪40年代,其中须二段、须四段、须六段是主要勘探目的层段,也是盆地周边地区寻找新气源最有利层位之一。根据钻井岩心观察、野外剖面实测和室内镜下岩石薄片鉴定分析,并结合岩石学、测井及地震等沉积相标志研究,确定大川中地区须家河组主要发育扇三角洲、辫状河三角洲和湖泊等沉积相带,进一步划分出若干亚相和微相。利用高分辨率层序地层学理论和技术,在须家河组识别出2个超长期和5个长期基准面旋回层序。以沉积学理论为指导,选择各长期旋回层序为等时地层单元编制四川盆地层序—岩相古地理图。编图结果表明,须家河组5个长期岩相古地理沉降中心、迁移方向和沉积相带的展布严格受龙门山和米仓山—大巴山两造山带非同步的构造格局控制。