红花檵木仿生古桩景快速成型技术

红花檵木作为一种彩色叶植物广泛应用于园林造景当中,目前在园林景观建设中红花檵木主要以低矮灌木的形式存在,由于其景观应用形式的单一化,严重制约了红花檵木生态、景观、经济价值的充分发挥以及相关行业的进一步发展。文章从红花檵木的生态、生理习性为理论基础出发,通过对两种红花檵木仿生古桩景制作材料及方法的介绍,公开了一种红花檵木古桩景快速成型园林景观应用的新形式、新方法,达到丰富红花檵木景观应用形式,提升其生态、景观价值的目的。同时应用形式的多样化,能促进红花檵木相关上下游产业的发展,为红花檵木景观产业注入新的活力。     

Methodology for dependence-based integrated constitutive modelling: An illustrative application to SiCp/Al composites

In industrial forming and machining process, the large plastic deformation of material takes place in wide loading ranges of strain-rate and forming temperature. A satisfactory modelling of quasi-static and dynamic material behaviors is of great importance for understanding physical process and processes optimization. A dependence-based integrated methodology, together with an improved weighted multi-objective parameter identification strategy is presented for the development of phenomenological constitutive model and the parameter identification using experimental data from quasi-static and dynamic tests with instantaneous strain rate variations and plastic strain-related temperature changes. The improved multi-objective parameter identification model is reformulated by introducing three weighting factors for valuing different measure errors and fit standard errors in individual objective function corresponding to each test, considering the sampling point number and active material parameter number under different loading conditions, and balancing optimization opportunity of quasi-static and dynamic sub-objective functions. The methodology is verified for feasibility through illustrative constitutive identification for SiC_p/Al composites. This may provide a methodology of constitutive modelling for predicting material behaviors in quasi-static and dynamic modes equally well.     

How to accelerate green technology diffusion? Directed technological change in the presence of coevolving absorptive capacity

The time window for effective climate change mitigation is closing. Technological change needs to be accelerated to limit global warming to a manageable level. Path dependence of technological change is one explanation for sluggish diffusion of green technologies. Firms acquire capital that differs by technology type and build up type-specific technological know-how needed to use capital efficiently. Path dependence emerges from cumulative knowledge stocks manifested in the productivity of supplied capital and firms’ capabilities. Increasing returns arise from induced innovation feedbacks and learning by doing. Relatively lower endowments with technological knowledge are a barrier to diffusion for new technologies. This paper shows how the evolution of relative stocks of technological knowledge explains different shapes of diffusion curves. Using an eco-technology extension of the macroeconomic agent-based model Eurace@unibi, it is shown how the effectiveness of different climate policies depends on the type and strength of diffusion barriers. Environmental taxes can outweigh lower productivity and subsidies perform better if lacking capabilities hinder firms to adopt a sufficiently mature technology.     

Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

光固化3D打印离型膜在树脂作用下的变形分析

在光固化光敏树脂成型过程中,聚四氟乙烯离型膜会在树脂液位的波动影响下发生变形,进而影响光固化制件的精度,因此需要减小离型膜在制件过程的变形量,确保其相对稳定。首先分析树脂液位变化,通过液位变化量,等效出树脂液波动带给离型膜的载荷,建立离型膜受力模型。然后基于离型薄膜的挠度变形理论,应用Ansys软件进行模拟研究,对不施加预应力和施加不同预应力作用下的离型膜变形结果分析,结果表明施加预应力有利于提高离型膜稳定性,且施加预应力为2. 645M Pa时离型膜受到树脂波动影响最小,位置精度变化在0. 01 mm。     

Screening of different agroindustrial by-products for industrial enzymes production by fermentation processes

Agroindustrial by-products are an abundant source of biocompounds that contain valuable nutrients, which are not exploited. In this work, lignocellulosic wastes (LW) were used in submerged fermentation (SmF) and solid-state fermentation (SSF) by Aspergillus niger NRRL3 to obtain valuable enzymes required in industries. SmF using soya bean hulls (SH), wheat bran (WB) and a by-product of wheat flour (F) produced the highest activities of endo-1,4-β-xylanase (Xyl) and endo-1,4-β-D-glucanase (EG) being at least 3 times lower than those obtained by SSF. The highest ratio of Xyl to EG was obtained in SmF with F. Xyl obtained by SmF with WB was the most thermally resistant. The enzymatic extract obtained in SmF using SH presented a high power of saccharification. The production of enzymes for further application such as bioethanol generation process revalue these LW and can help offset growing environmental problems.     

Effects of Sr2+ substitution on the crystal structure,Raman spectra,bond valence and microwave dielectric properties of Ba3-xSrx(VO4)2 solid solutions

The effects of Sr²⁺ substitution for Ba²⁺ on microwave dielectric properties and crystal structure of Ba_3-xSr_x(VO₄)₂ (0 ≤ x ≤ 3, BSVO) solid solution were investigated. Such Sr²⁺ substitution contributes to significant reduction in sintering temperature from 1400 °C to 1150 °C. Both permittivity (∑_r) and quality factor (Q × f) values decreased with increasing x value, which was determined to be related with the descending values of average polarizability and packing fraction, whereas the increase in τ_f value was explained by the decreased average VO bond length, A-site bond valence. BSVO ceramics possessed encouraging dielectric performances with ∑_r = 12.2–15.6 ± 0.1, Q × f = 44,340 - 62,000 ± 800 GHz, and τ_f = 24.5–64.5 ± 0.2 ppm/°C. Low-temperature sintering was manipulated by adding B₂O₃ as sintering additive for the representative Sr₃V₂O₈ (SVO) ceramic and only 1 wt.% B₂O₃ addition successfully contributed to a 21.7% decrease in sintering temperature to 900 °C, showing good chemical compatibility with silver electrodes, which render BSVO series and SVO ceramics potential candidates in multilayer electronic devices fabrication.     

Technology-driven growth and inclusive growth- implications for sustainable development in Africa

The 21st century industrial and digital age has been largely driven by technological dynamics and advancement. The Neo-classical argued that beyond the classical notion of investments and capital accumulation, technology growth, which is driven by innovation and development is a major driver for growth and development. Africa economies, which has been largely described as technologically dependent, has over the years through technological diffusion engaged modern processes in driving its economic activities, which has informed economic and even social outcomes. Therefore, using the generalised methods of moments for selected sub-Saharan African economies, this study intends to assess the extent to which the presence of technology has informed economic activities in Africa as well as its impact in addressing developmental issues of poverty and unemployment. Also, given the current drive towards sustainability, this study takes the neo-classical growth theory a step higher by examining the modulating effects of technology-driven growth (through mobile densities and ICTs) in setting the pace for sustainable development in Africa. The study shows that the expected long-run impact of a technology-induced growth in reshaping developmental outcomes is seen from the estimates.     

3D printing technology: The new era for food customization and elaboration

BackgroundDigitalizing food using 3-Dimensional (3D) printing is an incipient sector that has a great potential of producing customized food with complex geometries, tailored texture and nutritional content. Yet, its application is still limited and the process utility is under the investigation of many researchers.Scope and approachThe main objective of this review was to analyze and compare published articles pertaining 3D food printing to ensure how to reach compatibility between the huge varieties of food ingredients and their corresponding best printing parameters. Different from previously published reviews in the same journal by Lipton et al. (2015) and Liu et al. (2017), this review focuses in depth on optimizing extrusion based food printing which supports the widest array of food and maintains numerous shapes and textures. The benefits and limitations of 3D food printing were critically reviewed from a different perspective while providing ample mechanisms to overcome those barriers.Key findings and conclusionsFour main obstacles hamper the printing process: ordinance and guidelines, food shelf life, ingredients restrictions and post processing. Unity and integrity between material properties and process parameters is the key for a best end product. For each group, specific criteria should be monitored: rheological, textural, physiochemical and sensorial properties of the material its self in accordance with the process parameters of nozzle diameter, nozzle height, printing speeds and temperature of printing. It is hoped that this paper will unlock further research on investigating a wider range of food printing ingredients and their influence on customer acceptability.     

The co-location of innovation and production in clusters

ABSTRACT

This paper quantifies the extent of co-location of innovation and production for industry clusters with varying knowledge intensity. If input-output, knowledge, and skill linkages are interdependent and geographically bounded, then we would expect innovation and production to be co-located in regional clusters. However, theory predicts that the degree of agglomeration benefits associated with co-location may vary across economic activities with different knowledge intensity. Using data from the U.S. Cluster Mapping Project, I develop measures of the co-location of innovation and production for 27 industry clusters, examining patterns across regions and over time (1998–2015) in the United States. I find that there is a significant co-location of innovation and production for many clusters, especially for those with higher knowledge intensity. This paper focuses on the Information Technology and Analytical Instruments cluster and the Automotive cluster to illustrate the co-location measures and the micro-geography of innovation and production.