HACCP体系用于给水处理厂浊度控制的研究

介绍了危害分析和关键控制点（HACCP）体系的基本原理及其在城市给水系统中的应用进展，并以我国南方某城市的给水处理厂为例，对HACCP体系用于水厂浊度控制开展了探索性研究。应用故障树分析技术识别了水厂中可能导致浊度超标的潜在危害，应用决策树分析技术确定了水厂浊度控制的关键控制点，建立了关键控制点和质量控制点的关键限值、监控系统以及纠偏措施，并分析了对验证程序以及文件和记录保存系统的要求。     

Synthesis and Characterizations of Triphenylamine End-Functionalized Polymers via Reversible Addition-Fragmentation Chain Transfer Polymerization

A novel reversible addition-fragmentation chain transfer (RAFT) reagent bearing triphenylamine (TPA) group, 4-diphenylamino-dithiobenzoic acid benzyl ester (DDABE), was designed and synthesized. It was used in the RAFT polymerizations of styrene (St) and methyl acrylate (MA) to prepare end-functionalized polymers. The results of the polymerization showed that the RAFT polymerizations could be well controlled using DDABE as the RAFT agent. Number-average molecular weight (M_n,GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow (PDI< 1.50). The results of chain-extension reaction, ¹H NMR spectra and UV/Vis spectra confirmed that most of the polymers chains were end-capped by the functional triphenylamine (TPA) groups. The effect of feed molar ratios of St/DDABE/AIBN on polymerization was investigated.     

光栅谐振子检测地震波的理论和方法研究

提出了一种新的检波理论和方法 ,它是一种实现检测地震波信号的地震勘探技术。采用光栅谐振子为敏感元件 ,将大地震动的机械信号转换成光调制信号—莫尔条纹 ,再用光电接收器件将其转换成数字化电信号输出。光栅谐振子检测地震波的装置能够直接将大地震动的机械信号转化为脉冲数字信号输出 ;并以记数的形式采样 ,避免了器件的精度不同对传感器输出的数据质量的影响 ,从而简化了组装工艺。文中阐述了该方法的工作原理、参数计算、测试方法和实验结果     

无纸化建造

本文通过分析先锋建筑师借鉴汽车制造领域的无纸化技术进行的建造实践,揭示了无纸化建造的操作过程,并探讨了无纸化建造的意义,那就是无纸化不仅改变了传统的设计方法,而且改变了传统的建造方式,这将是人类的建造技术发展史上的一场伟大的变革.文章最后探讨了无纸化建造在中国的实践意义.     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

BFG的热值及温度与0号机出力和效率的关系

分析煤气温度、干煤气热值和湿煤气热值之间的关系，得到0号机组长期达不到额定出力和效率的原因，在此基础上提出解决问题的方法。     

高炉与风机配置的优化

根据高炉风机配置的具体情况 ,为充分发挥大风机生产优势 ,建立了适宜的送风制度及装料制度 ,对利旧风机采取了自动防喘振控制、高压水阻软启动的措施 ,风机仪表采用集散控制 ,并优化上料系统 ,提高了高炉上料能力。一系列优化方案保证了高炉稳定、安全、顺行 ,1号、2号高炉利用系数分别由 3 .3 64、3 .43 2t/m3.d提高到 3 .917和 3 .767t/m3.d。     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

Genetic marking shows that Ph+ cells present in autologous transplants of chronic myelogenous leukemia (CML) contribute to relapse after autologous bone marrow in CML

Relapse after autologous bone marrow transplantation for chronic myelogenous leukemia (CML) can be due either to the persistence of leukemia cells in systemic tissues following preparative therapy, or due to the persistence of leukemia cells in the autologous marrow used to restore marrow function after intensive therapy. To help distinguish between these two possible causes of relapse, we used safety-modified retroviruses, which contain the bacterial resistance gene NEO, to mark autologous marrow cells that had been collected from patients early in the phase of hematopoietic recovery after in vivo chemotherapy. The cells were then subjected to ex vivo CD34 selection following collection and 30% of the bone marrow were exposed to a safety-modified virus. This marrow was infused after delivery of systemic therapy, which consisted of total body irradiation (1,020 cGy), cyclophosphamide (120 mg/kg), and VP-16 (750 mg/m2). RT PCR assays specific for the bacterial NEO mRNA, which was coded for by the virus, and the bcr-abl mRNA showed that in two evaluable CML patients transplanted with marked cells, sufficient numbers of leukemia cells remained in the infused marrow to contribute to systemic relapse. In addition, both normal and leukemic cells positive for the retroviral transgenome persisted in the systemic circulation of the patients for at least 280 days posttransplant showing that the infused marrow was responsible for the return of hematopoiesis following the preparative therapy. This observation shows that it is possible to use a replication-incompetent safety-modified retrovirus in order to introduce DNA sequences into the hematopoietic cells of patients undergoing autologous bone marrow transplantation. Moreover, this data suggested that additional fractionation procedures will be necessary to reduce the probability of relapse after bone marrow transplantation in at least the advanced stages of the disease in CML patients undergoing autologous bone marrow transplantation procedures.