Energy state of InGaAs quantum dots on SiO2-patterned vicinal substrate

The optical properties of In_0.8Ga_0.2As self-assembled quantum dots (SAQDs) grown on GaAs wire structures formed by utilizing SiO₂-patterned exact and 5°-off (001) GaAs substrates have been studied with micro-photoluminescence (μ-PL). Single PL peak was occurred for In_0.8Ga_0.2As SAQDs grown on SiO₂-patterned exact (001) GaAs, whereas double PL peaks were showed for SAQDs grown on 5°-off (001) GaAs substrates as the width of the opening windows increased. The power-dependent μ-PL spectra show that the first and second peaks of these double peaks were originated from the well-defined ground and excited state, respectively. These results demonstrated that In_0.8Ga_0.2As SAQDs selectively grown by utilizing SiO₂-patterned 5°-off (001) GaAs substrates have well-defined zero-dimensional quantum states.     

Fabrication and Property of Mullite Whiskers Frameworks with an Ultrahigh Porosity by Expandable Mesocarbon Microbeads

Mullite whiskers frameworks with an ultrahigh porosity were fabricated by the vapor‐phase reaction of AlF₃, Al₂O₃, and SiO₂ and adding expandable mesocarbon microbeads (MCMB) as a pore‐forming agent. A large volume expansion of 122% for MCMB due to its layered structure occurred during the formation of mullite whiskers, resulting in the expansion of samples and high porosities of 87.7%–98.2% at 50–90 wt% MCMB contents. Perfect whiskers and a lap‐joint structure formed due to the formation of mullites through the vapor‐phase reaction. A bimodal pore structure was achieved from the spaces of the whiskers framework and burning of the expanded MCMB. High compressive strengths of 1.7 to 5.4 MPa were obtained for the porous mullite at porosities of 94.2%–87.7%, which suggested a rigid structure; these strengths at the ultrahigh porosities are attributed to the merit of the framework with high strength whiskers and their strong bonding.     

Electrical resistivity of Si3N4 ceramics with Yb2O3 additive

Si₃N₄ ceramics with excellent mechanical properties are used for heat dissipation substrates and so on. In order to improve their reliability and expand their application fields, it is desirable to understand and control the electrical properties of Si₃N₄ ceramics. In this study, the electrical resistivity of Si₃N₄ ceramics with Yb₂O₃ additive was investigated by applying various voltages at temperatures ranging from 25°C to 300°C. When Yb₂O₃ was added as a sintering aid to Si₃N₄ ceramics, a crystalline J-phase (Yb₄Si₂O₇N₂) was formed and their electrical resistivity was significantly lower than that of Y₂O₃ additive. The electrical resistivity of the Yb₂O₃-added ceramics decreased with an increase in temperature and applied voltage. Yb existed in multiple valence states, Yb²⁺ and Yb³⁺, in the Si₃N₄ ceramics and the decrease in the electrical resistivity can be attributed hopping conduction through the J-phase. The J-phase in the Si₃N₄ ceramics was observed to be continuous, and percolation analysis suggested that the J-phase formed an infinite cluster. Therefore, the decrease in the electrical resistivity of the Yb₂O₃-added Si₃N₄ ceramics was found mainly to result from the formation of an infinite cluster of J-phase, which exhibits hopping conduction.     

Channel Models for Medical Implant Communication

Information regarding the propagation media is typically gathered by conducting physical experiments, measuring and processing the corresponding data to obtain channel characteristics. When this propagation media is human body, for example in case of medical implants, then this approach might not be practical. In this paper, an immersive visualization environment is presented, which is used as a scientific instrument that gives us the ability to observe RF propagation from medical implants inside a human body. This virtual environment allows for more natural interaction between experts with different backgrounds, such as engineering and medical sciences. Here, we show how this platform has been used to determine channel models for medical implant communication systems.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

資源環境の保全をめざした二次副産材を導入するコンクリ一ト材料の発展的利用に関する研究

日本では,21世紀半ばに人工の固体物質の代表である解体コンクリート塊の排出量がピークを迎えると同時に,最終処分が困難になる状況が想定されていることから,コンクリート材料の完全資源型の利活用要求はより一層高まるといえる.本研究は,副産微粉,再生骨材などの二次副産材を積極的に混和し,同一産地*種類型の調合条件のもとで,コンクリートの物性改善,資源有効利活用を目的としたコンクリートを製造し,その基礎的物性の評価と環境影響評価を行い,環境保全に資するコンクリート材料の発展的利用のあり方を検討した.     

Optimization of magnesium hydroxide composite material mixed with expanded graphite and calcium chloride for chemical heat pumps

A composite chemical heat storage material (EMC) comprising a mixture of expanded graphite (EG), magnesium hydroxide (Mg(OH)₂), and calcium chloride (CaCl₂) was developed as a magnesium oxide/water chemical heat pump reactant. The optimization of a mixing weight ratio between the Mg(OH)₂ content of EMC and EMC itself was discussed from the viewpoints of both heat storage capacity and reactivity by considering the reaction rate constants from a kinetic analysis. It was confirmed that the dehydration reactivity of EMC increased as the mixing weight ratio decreased; however, the heat capacity of the EMC unit mass decreased. A multiplied factor consisting of the multiplied value dehydration rate constant and mixing weight ratio was introduced. It was suggested that a weight ratio of approximately 0.80 was the optimized value when the mixing molar ratio between CaCl₂ and Mg(OH)₂ was 0.10. Dehydration of EMC with an optimized mixing weight ratio and dehydration of pure Mg(OH)₂ were conducted under various temperatures to compare the reaction rate constants of each material. From this study, it was demonstrated that EMC performed better on dehydration than pure Mg(OH)₂.     

Effect of polyethyleneimine-fatty acid complex type dispersant structure on the overall processing chain of Si3N4 ceramics using multicomponent non-aqueous slurries

The effect of fatty acid structure of polyethyleneimine (PEI)-fatty acid complex, which was designed as a polymer dispersant for multi-component non-aqueous slurries, on the overall processing chain of Si₃N₄ ceramics involving slurry stabilization, spray drying, compaction, and liquid sintering was investigated using PEI-oleic acid (PEI-OA) and PEI-isostearic (PEI-ISA) complexes. Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries were selected as a real model for Si₃N₄-based multicomponent slurries. It was observed that both PEI-OA and PEI-ISA can stabilize Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries; however, the PEI-ISA system tended to have slightly higher slurry viscosity, which was suspected to be due to the interactions between protruded PEI segments among short ISA chains. The spray-dried granules from PEI-ISA-stabilized slurry were observed to have filled structures with higher surface roughness whereas those prepared from PEI-OA-stabilized slurry were observed to have hollow-structured granules. The granules prepared from PEI-OA slurry had improved flow and compaction properties with higher relative density of green compacts compared with those prepared from PEI-ISA-stabilized slurry, whereas the relative density and microstructural homogeneity of S₃N₄ ceramics sintered at 1600?°C for 2?h were observed to be higher for the PEI-ISA system. It is suspected that PEI-OA effectively improved the dispersion stability of multicomponent slurries and flow/compaction properties of granules; however, the inhomogeneous microstructures of green compacts induced by the hollow-structured granules had an adverse effect on the sintering of Si₃N₄ ceramics.