SrTiO3基陶瓷的介电谱研究

采用标准的固相反应法制备成０．９１（Ｓｒ０．８４Ｐｂ０．１６）ＴｉＯ３＋０．０９（Ｂｉ２Ｏ３·３ＴｉＯ２）介电陶瓷（缩记为ＳｒＴｉＯ３基陶瓷），并详细地研究了此种陶瓷的介电谱，即介电温度谱和介电频率谱。由介电谱确定了此种陶瓷的结构相变、居里温度、介电弛豫频率和介电弛豫时间，并对它们进行了讨论。     

金红石TiO2晶体中F和F+心电子结构及其吸收光谱研究

本文运用嵌入原子簇的电荷自洽离散变分方法（ＳＣＣ－ＤＶＭ－Ｘα方法）分别对ＴｉＯ２晶体中Ｆ和Ｆ＾＋心的能级结构进行计算,得到了Ｆ和Ｆ＾＋心的光学吸收跃迁模式,其跃迁能量分别是０．９８,１．７８ｅＶ,我们认为,经还原后的ＴｉＯ２晶体,在光吸收实验中测到的１．２μｍ（１．０２ｅＶ）,７６０ｎｍ（１．７５ｅＶ）两个峰分别是由于还原过程中形成的Ｆ和Ｆ＾＋心的吸收峰,并存在着Ｆ→Ｆ＾＋的转型过程。     

八种新功能晶体的比热及其与相变掺杂物关系的实验研究

本文对八种新型功能晶体Ｌｉ２Ｂ４Ｏ７、Ｂｉ１２ＴｉＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ４Ｇｅ３Ｏ１２、Ｓｒ１－ｘＢａｘＮｂ２Ｏ６（ｘ＝０．３３，０．４８）、ＬｉＴａＯ３等在１３０～９７３Ｋ范围内的比热行为及其与相变、组分之间的关系进行了实验研究，给出了比热的多项式拟合方程，并与用纽曼－卡普定律及用Ｗｉｋｅｌｍａｎｎ经验方程的比热计算值作了对比，为晶体比热的估算提供了依据和方法。     

立方A^4＋M^5＋2O7型化合物与新型负热膨胀材料

概述了立方Ａ＾４＋Ｍ＾５＋２Ｏ７型化合物的结构特点，讨论了ＡＶ２－ｘＰｘＯ７型（Ａ＝Ｚｒ或Ｈｆ；ｘ＝０．１～１．２）及其部分取代的Ａ＾４＋１－ｙＢ＾４＋ｙＶ２－ｘＰｘＯ７型（Ｂ＝Ｔｉ，Ｃｅ，Ｔｈ，Ｕ，Ｍｏ，Ｐｔ，Ｐｂ，Ｓｎ，Ｇｅ或Ｓｉ；ｙ＝０．１～０．４）和Ａ＾４＋１－ｙＣ＾１＋ｙＤ＾３＋ｙＶ２－ｘＰｘＯ７型（Ｃ为碱金属元素，Ｄ为稀土金属元素）材料的负热膨胀性能。     

掺Ce稀土铁石榴石单晶的制备及磁光性能

采用改进的助熔刑法生长块状Ｃｅ：ＹＩＧ单晶,分析了它的晶体结构、测试了在近红外波段的磁光性能Ｃｅ~３＋掺入铁石榴石十二面体位极大地增强了材料的法拉第旋转,在λ＝０．７８μｍ时,Ｙ３Ｆｅ５Ｏ１２晶体中每一个 Ｃｅ~３＋替代 Ｙ~３＋;其Ｆ的增加量（ｄθＦ,／ｄｘ）达到 ０．６×１０~４ｄｅｇ／ｃｍ,比同量 Ｂｉ~３＋替代时晶体Ｆ的增加量高２倍,在稀土铁石榴石中掺入Ｙｂ和Ｅｕ;由于其有弱的还原性,能抑制Ｃｅ~４的形成,增加 Ｃｅ~（３＋）离子的替代量。     

Nd:Gd_xY_(1-x)Ca_4O(BO_3)_3晶体的生长及其光谱性能研究

利用熔体提拉法生长了大尺寸,高质量的新型激光自信频晶体Ｎｄ：ＧｄｘＹ１－ｘＣａ４Ｏ（ＢＯ３）３简称Ｎｄ：ＧｄＹＣＯＢ）．对Ｎｄ：ＧｄＹＣＯＢ晶体的ＸＲＤ衍射图进行指标化,得到它的晶胞参数为α＝８．０８０Ａ; ｂ＝１６．０１６Ａ; ｃ＝３．５３８Ａ; β＝１０１．１８°;μ＝４９１．１Ａ３．对取自不同部位的晶体粉末进行ＩＣＰ原子发射光谱分析表明晶体整体组份均匀一致,根据熔体和晶体粉末的ＩＣＰ数据计算,Ｎｄ：ＧｄＹＣＯＢ晶体中Ｎｄ３＋的分凝系数为０．６３．首次报道了 Ｎｄ：ＧｄＹＣＯＢ晶体２００～３０００ｎｍ室温透过光谱和室温荧光光谱及荧光寿命．室温透过光谱表明Ｎｄ：ＧｄＹＣＯＢ晶体的紫外吸收边在～２２０ｎｍ,具有很宽的透光波段（～２２０～２７００ｎｍ）; Ｎｄ：ＧｄＹＣＯＢ晶体在８００ｎｍ附近存在很强的吸收,适合于ＬＤ泵浦．荧光光谱表明Ｎｄ：ＧｄＹＣＯＢ晶体是一种很有潜力的ＲＧＢ（ｒｅｄ;ｇｒｅｅｎ, ｂｌｕｅ）激光自信频晶体．掺杂 ４％、 ５％ Ｎｄ：ＧｄＹＣＯＢ晶体的荧光寿命分别为 １０５μｓ和１００μｓ．     

掺镁铌酸钾锂晶体的生长与介电特性

首次用提拉法生长了K3Li2 Nb5O15∶Mg晶体 ,在 10～70 0K的温度范围内 ,研究了该晶体的c、a方向片的介电温度特性 ,测量了频率在 5× 10 2 ～ 5× 10 8Hz范围内介电常数的频率依赖关系。结果表明除了在 62 3K附近有铁电 -顺电相变以外 ,还在 80K左右存在铁电 -铁电相变 ,其介电弛豫频率约为2 5 0MHz左右。     

纳米ZrO2/(1-n)SiO2-nAl2O3介孔复合作的制备与光致发光

采用溶胶－凝胶法和超临界干燥技术制备了（１－ｎ）ＳｉＯ２－ｎＡｌ２Ｏ３（ｎ＝０、０．０１、０．１）混合气凝胶体系，并以此作为载体，成功地将纳米ＺｒＯ２粒子组装到（１－ｎ）ＳｉＯ２－ｎＡｌ２Ｏ３介孔体系中，而形成纳米ＺｒＯ２／（１－ｎ）ＳｉＯ２－ｎＡｌ２Ｏ３介孔复合材料。光致发光光谱研究表明，室温下以３１６ｎｍ（３．９２ｅＶ）波长激发时，纳米ＺｒＯ２粒子５４０ｎｍ（２．３０ｅＶ）荧光峰，在介孔复合体     

B位掺杂对（Pb,Ca）（Fe1／2Nb1／2）O3陶瓷微波介电性能的影响

研究了Ｂ位分别掺杂Ｓｎ＾４＋、Ｚｒ＾４＋、Ｃｅ＾４＋对（Ｐｂ０．４５Ｃａ０．２５）（Ｆｅ１／２Ｎｂ１／２）Ｏ３（ＰＣＦＮ）陶瓷的烧结行为、微观结构及微波介电性能的影响。实验结果表明,掺杂样品能在相对较低的温度下烧结（１２００℃／２ｈ）,Ｂ位大半径离子的掺入使介电常数降低,适量的Ｂ位掺杂能不同程度的改进ＰＣＦＮ陶瓷的综合微波介电性能。用这种材料做成的带通滤波器在中心频率为９２８．４ＭＨｚ下,插入损耗为２．４６９ｄＢ,满足插入损耗应小于３ｄＢ的要求,在移动通信中有着实际应用前景。     

LiNiO2热分解反应动力学研究

用ＤＴＡ和ＸＲＤ研究了ＬｉＮｉＯ_２在空气中的热分解过程为：ＬｉＮｉＯ_２（ｓ）→(６５０～７２０℃)Ｌｉ_２Ｎｉ_８Ｏ_{１０（ｓ）}＋４Ｌｉ_２Ｏ_（ｓ）＋Ｏ_２（ｇ）→(８５０～９５０℃)Ｌｉ_２Ｏ_（ｓ）＋８ＮｉＯ_（ｓ）＋１／２Ｏ_２（ｇ） →(１０００～１１５０℃)ＮｉＯ（ｓ）＋Ｌｉ_２Ｏ_（ｇ）用 Ｄｏｙｌｅ－Ｏｚａｗａ法和 Ｋｉｓｓｉｎｇｅｒ法计算了各反应阶段的表观活化能分别为 ７４７．１８±１．０ ｋＪ·ｍｏｌ^－１、９３２．４６±１．０ ｋＪ·ｍｏｌ^－１和 １１２６．９７±１．０ ｋＪ·ｍｏｌ^－１．用 Ｋｉｓｓｉｎｇｅｒ法确定了反应级数和频率因子,确定了三个阶段的动力学方程分别为 ｄα／ｄt＝１．７３６ｘ１０３９ｅ^{－９００００／Ｔ}（１－α）^{１．０５７}; ｄα／ｄｔ＝１８０６×１０^３９ｅ^{－１１１５００／Ｔ}（１－α）^{０．８４４};ｄα／ｄｔ＝４．２６２×１０４２ｅ^{－１３５０００／Ｔ}（１－α）^{１．２７５}     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.