无尾扑翼无人机动力学建模及仿真

近年来,仿生无人机在战场侦察和飞行巡逻等方面应用广泛,使其成为无人机领域的研究热门,传统仿生无尾扑翼无人机的飞行建模问题通常较为复杂,计算难度较大,因此亟待对此类无人机进行飞行控制的研究。文章针对仿昆虫无尾扑翼无人机的动力学建模问题进行了研究,基于叶素法、准稳态假设模型以及刚体动力学建模方法,对机翼运动进行受力分析,得到机翼的动力学模型;机体采用刚体动力学方法,建立无人机飞行模型。仿昆虫无尾扑翼无人机系统采用PID控制模型对机体纵向动力学模型控制,以俯仰角、阶跃输入方式,通过实验表明,系统的超调量分别为和,调节时间分别为0.5和1,稳态误差符合实验要求。     

仿鸟扑翼飞行器姿态镇定研究

针对仿鸟扑翼飞行器的欠驱动特性,提出了一种简化其飞行控制问题并实现其局部渐近稳定的控制方法．建立并分析了仿鸟扑翼飞行器的动力学和运动学模型,证明其控制问题等价于升力、推力独立可控情况下的姿态控制问题．进一步分析的结果表明,仿鸟扑翼飞行器的升力、推力都是独立可控的,其姿态控制为耦合输入下刚体的姿态控制问题．通过设计光滑时变反馈控制律实现姿态控制的局部渐近稳定,从而解决扑翼飞行器的飞行控制问题．     

微型仿昆扑翼飞行器解耦操控机制

提出一种解耦操控机制，用于解决微型仿昆扑翼飞行器飞行控制中的欠驱动问题．首先通过理论分析和仿真试验分析了翅膀的振翅运动参数对气动力旋量的控制作用；然后在对昆虫飞行所采用的生物学振翅运动进行模拟的基础上，通过调整翅膀的振翅运动参数，设计了一个能对气动力和气动力矩实现独立控制的解耦操控机制．此操控机制采用周期函数将控制输入量参数化，从而在仿昆扑翼布局的动力学模型中引入更多数目的独立控制量．通过将原动力学系统转化为完全能控系统，解决了仿昆扑翼布局的欠驱动控制问题．同时，此操控机制仅仅要求转动角可控，有效地降低了仿昆扑翼飞行器的设计难度．     

微扑翼飞行机器人姿态反演自适应模糊控制

研究微扑翼飞行机器人姿态控制优化问题,因扑翼飞行的复杂性、系统的非线性、时变参数以及各种干扰而极具挑战性.为了提高系统姿态稳定性,提出了一种反演自适应模糊控制策略,针对传统反演控制律设计的不足之处,对微扑翼飞行机器人控制律设计中需要知道被控对象精确模型信息的部分,采用模糊控制法去逼近,从而实现了无需微扑翼飞行器精确模型的全新控制律,避免了因建模误差对控制带来的不良影响,并在此基础上证明了系统的稳定性.仿真结果证实了控制方法的有效性.     

扑翼飞行器的多机协同飞行设计与实践

扑翼飞行器（flapping-wing aerial vehicle,FAV）是一种模仿动物飞行方式的新型飞行器,其具有仿生性且飞行声音小等特点,具有广泛的军事和民用前景。由于扑翼飞行器动力学模型复杂且容易受到风等环境因素的影响,目前尚无成熟稳定的控制算法可以用来控制扑翼飞行器。目前对扑翼飞行器的控制大多仍以手动控制为主,然而手动控制扑翼飞行器的方式会受到飞手操作水平的限制,难以大范围推广。通过对PX4固件和QGC地面站进行定制化改造以满足在一定应用背景下扑翼飞行器的有效控制,实现了扑翼飞行器的自动控制和协同飞行。同时还将扑翼飞行器多机协同飞行设计与实践引入到了“嵌入式计算技术”课程教学中,激发了学生的学习热情,提高了学生的创新实践能力。     

扑翼飞行的气动建模与仿真分析

用计算流体力学的数值仿真方法对微扑翼飞行的非定常空气动力学问题进行了建模与仿真研究。在对昆虫扑翼飞行运动的仿生模拟基础上，建立了简化的扑翼运动二维翼型的运动学与空气动力学模型。利用任意拉格朗日欧拉（ALE）有限元方法求解出N-S方程的数值解，将流场仿真结果与实验进行了对比，并分析了扑翼运动产生的前缘漩涡对升力的作用。文中的建模、分析方法和结论对微扑翼飞行器的分析设计和应用提供了一定的理论依据。     

独立驱动的仿鸟扑翼飞行机器人的系统设计与实验EI北大核心CSCD

扑翼飞行机器人模仿自然界中的飞行生物,通过扑动翅膀拍打空气驱动飞行.它们机动性好、飞行效率高、噪音小,在某些应用场景比传统的固定翼飞机和旋翼飞机更有优势.目前扑翼飞行机器人的研究大多集中在机理研究和理论的建模与控制,鲜有实现室外的自主飞行,难以应对复杂的实际应用需求.在本文中,设计了一种独立驱动的仿鸟扑翼飞行机器人USTBird,通过两个舵机独立驱动左右翅膀可实现无可控尾翼的机动飞行.通过搭载自主设计的微型飞控板、GPS以及惯性导航模块,采用PD控制实现了扑翼飞行机器人的室外自主巡航飞行.设计了针对扑翼机器人的轻型两自由云台,很大程度上消除了机翼扑动飞行引起的图像抖动问题.针对机身振动和GPS测量误差带来的位置误差,采用无迹卡尔曼滤波算法对GPS采集的位置信息进行估计,提升了位置估计精度.设计了面向扑翼飞行机器人的地面站系统.考虑到扑翼飞行机器人存在的转向滞后问题,对偏航角设计双闭环分段PD控制器,最终实现了在外圆半径40 m和内圆半径10 m的圆环内的自主巡航任务.     

基于聚类分析和运动描述语言的扑翼飞行机器人行为规划

为了解决扑翼飞行机器人实时控制过程中操作者工作量大、操作较为复杂的难题,实现扑翼飞行机器人的分布式智能控制,提出了基于聚类分析和运动描述语言的扑翼飞行机器人行为规划方法.利用扑翼飞行机器人飞行数据聚类分析的结果,将机器人运动行为进行合理分类.在保证了运动描述语言的基元关系的同时,合理提取了扑翼飞行机器人的行为特征,并针对扑翼飞行机器人绕杆任务定义了4类运动基元.以扑翼飞行机器人和机载陀螺仪搭建了扑翼飞行机器人实验系统.通过直接控制方法和基于运动描述语言的机器人行为规划方法进行了实物实验和仿真实验,实验结果验证了所提方法的可行性和有效性.     

动力翼伞非线性动力学建模与仿真

关于空运翼伞控制问题建立合理的动力学模型,是实现动力翼伞飞行控制的前提条件之一.传统方法翼伞建模多数是针对不带动力情况下的翼伞建模,不能适应动力翼伞的飞行控制.假设翼伞承载物和软翼之间具有俯仰和偏航2个自由度,通过对承载物和软翼所受作用力和作用力矩进行分析,分别建立软翼和承载物体坐标系下的作用力和力矩的平衡方程,通过体坐标系转换和消除翼伞内部状态量,得到有利于实现动力翼伞控制的8自由度非线性动力学状态方程.仿真结果表明这种动力学模型正确有效,更有助于实现动力翼伞的飞行控制.     

变后掠翼战术巡航导弹动力学控制及仿真

采用变后掠翼技术实现战术巡航导弹多任务低能耗飞行,导弹的动力学与控制特性因为弹翼的运动更加复杂化,给出了包含弹翼运动的整弹动力学模型,基于小扰动法和系数"冻结"法,得出了导弹包含弹翼运动参数的三通道数学模型,充分考虑了气动参数摄动和弹翼运动参数时变特性,将其视为标称值与已知上下界的摄动量的和.采用变结构控制理论设计自动驾驶仪,仿真结果表明,设计的控制器具有强鲁棒性,能够抑制参数变化的影响,满足导弹控制性能指标要求.     

Flight control of a rotary wing UAV using backstepping

This paper presents a novel application of backstepping controller for autonomous landing of a rotary wing UAV (RUAV). This application, which holds good for the full flight envelope control, is an extension of a backstepping algorithm for general rigid body velocity control. The nonlinear RUAV model used in this paper includes the flapping and servo dynamics. The backstepping‐based controller takes advantage of the ‘decoupling’ of the translation and rotation dynamics of the rigid body, resulting in a two‐step procedure to obtain the RUAV control inputs. The first step is to compute desired thrusts and flapping angles to achieve the commanded position and the second step is to compute control inputs, which achieve the desired thrusts and flapping angles. This paper presents a detailed analysis of the inclusion of a flapping angle correction term in control. The performance of the proposed algorithm is tested using a high‐fidelity RUAV simulation model. The RUAV simulation model is based on miniature rotorcraft parameters. The closed‐loop response of the rotorcraft indicates that the desired position is achieved after a short transient. The Eagle RUAV control inputs, obtained using high‐fidelity simulation results, clearly demonstrate that this algorithm can be implemented on practical RUAVs. Copyright © 2009 John Wiley & Sons, Ltd.     

Flapping flight for biomimetic robotic insects: part I-system modeling

This paper presents the mathematical modeling of flapping flight inch-size micro aerial vehicles (MAVs), namely micromechanical flying insects (MFIs). The target robotic insects are electromechanical devices propelled by a pair of independent flapping wings to achieve sustained autonomous flight, thereby mimicking real insects. In this paper, we describe the system dynamic models which include several elements that are substantially different from those present in fixed or rotary wing MAVs. These models include the wing-thorax dynamics, the flapping flight aerodynamics at a low Reynolds number regime, the body dynamics, and the biomimetic sensory system consisting of ocelli, halteres, magnetic compass, and optical flow sensors. The mathematical models are developed based on biological principles, analytical models, and experimental data. They are presented in the Virtual Insect Flight Simulator (VIFS) and are integrated together to give a realistic simulation for MFI and insect flight. VIFS is a software tool intended for modeling flapping flight mechanisms and for testing and evaluating the performance of different flight control algorithms.     

仿昆扑翼飞行器全解耦控制

针对仿昆扑翼飞行器飞行控制所面临的欠驱动问题,基于平均理论,提出采用周期时变反馈策略控制仿昆扑翼飞行器的策略,并给出了设计周期时变反馈控制器的输入参数化设计方法．该方法对飞行昆虫的扑翼运动进行仿生模拟,通过调整根翅运动参数,实现了对6个方向气动力和力矩的独立控制．本质上就是用参数表示欠驱动系统的输入,并以此构造周期时变反馈函数;从而在原系统中引入更多数目的独立控制量,将原系统转化为完全能控系统．然后,将此可控系统线性化,并利用线性反馈控制器设计工具设计其反馈控制律．仿真结果表明,基于该策略设计的控制器具有响应速度快、稳定误差小、鲁棒性强等特点．     

Flapping flight for biomimetic robotic insects: part II-flight control design

In this paper, we present the design of the flight control algorithms for flapping wing micromechanical flying insects (MFIs). Inspired by the sensory feedback and neuromotor structure of insects, we propose a similar top-down hierarchical architecture to achieve high performance despite the MFIs' limited on-board computational resources. The flight stabilization problem is formulated as high-frequency periodic control of an underactuated system. In particular, we provide a methodology to approximate the time-varying dynamics caused by the aerodynamic forces with a time-invariant model using averaging theory and a biomimetic parametrization of the wing trajectories. This approximation leads to a simpler dynamical model that can be identified using experimental data from the on-board sensors and the voltage inputs to the wing actuators. The overall control law is a periodic proportional output feedback. Simulations, including sensor and actuator models, demonstrate stable flight in hovering mode.     

仿生扑翼“0”形轨迹机构的设计及气动力特性

针对仿生扑翼飞行器的驱动结构进行设计,提出了一种空间摇杆式的驱动机构与机翼扭转机构,实现机翼扑动过程中的"0"形空间运动轨迹.针对机翼的空间"0"字形运动,建立仿生飞行器气动分析模型,采用动网格与非定常数值计算方法,对机翼拍动过程中不同相位下的升阻特性进行分析,并通过空气动力效率与流场对比分析,得到不同参数条件下的气动效率,为仿生扑翼飞行器的设计及扑动模式的选择提供参考.通过气动力测量实验、台架姿态标定和外场飞行测试,验证了结构设计的合理性.     

Three‐time scale singular perturbation control and stability analysis for an autonomous helicopter on a platform

A three‐time scale singular perturbation control law is designed for a nonlinear helicopter model in vertical flight. The proposed control law is based on time scale decomposition and is able to achieve the desired altitude by selecting a desired angular velocity and the associated collective pitch angle of the blades. The stability of the system is performed by presenting a stability analysis for generic three‐time scale singularly perturbed systems, which allows to construct a composite Lyapunov function for the resultant closed‐loop system by using time scale separation and also providing mathematical expressions for the upper bounds of the singularly perturbed parameters that define the three‐time scale. Numerical results on both, the singular perturbation control strategy and the stability analysis, are also presented for the studied nonlinear highly coupled helicopter model. Copyright © 2012 John Wiley & Sons, Ltd.     

基于MATLAB的磁悬浮系统奇异摄动参数计算

磁悬浮系统的稳定性是磁悬浮列车能否正式投入营运的关键因素。而实际的悬浮系统由于存在小电感奇异摄动参数，使得悬浮系统的动力学模型有相当高的阶数以及病态的数值特性，因此该文采用奇异摄动法处理这类问题。根据奇异摄动理论可知，要使系统稳定，摄动参数必存在一个稳定的上界。该文针对悬浮系统模型复杂和系统变参数的特点，借助MATLAB简化了磁悬浮系统奇异摄动参数稳定上界的计算。结果表明该方法的有效性和可行性，对磁悬浮系统的理论分析和工程研究有一定的参考价值。     

Modelling and finite-time stability analysis of psoriasis pathogenesis

A new systems model of psoriasis is presented and analysed from the perspective of control theory. Cytokines are treated as actuators to the plant model that govern the cell population under the reasonable assumption that cytokine dynamics are faster than the cell population dynamics. The analysis of various equilibria is undertaken based on singular perturbation theory. Finite-time stability and stabilisation have been studied in various engineering applications where the principal paradigm uses non-Lipschitz functions of the states. A comprehensive study of the finite-time stability properties of the proposed psoriasis dynamics is carried out. It is demonstrated that the dynamics are finite-time convergent to certain equilibrium points rather than asymptotically or exponentially convergent. This feature of finite-time convergence motivates the development of a modified version of the Michaelis–Menten function, frequently used in biology. This framework is used to model cytokines as fast finite-time actuators.