一种应用于欠采样图像的自适应稀疏重建方法

针对图像稀疏重建中因使用固定参数的全变分(TV)正则项所带来的图像细节缺失和阶梯效应问题,提出了一种自适应二阶广义全变分(TGV)约束的图像稀疏重建算法.该算法采用二阶广义全变分模型权衡图像的一阶导数和二阶导数,且能够根据每次迭代得到的重构解及对应张量函数自适应地修正权重系数,实现图像的稀疏重建.与全变分正则模型和固定参数广义全变分正则模型相比,该算法能更好地保持图像轮廓和细节信息,提高重建图像的峰值信噪比(PSNR)和结构相似度(SSIM).     

去除乘性噪声的二阶总广义变分模型及算法

针对总变分去噪模型容易导致阶梯效应的缺陷,提 出了一种新的乘性噪声去噪模型。在新模型中,二阶总广义变分(TGV)是正则项,它能自动平 衡一阶和二阶导数项,使得新模型在去除乘性噪声的同时不但能够保 持图像的边缘信息,而且还能去除阶梯效应。为了有效的计算该模型,设计了一个快速迭代算 法。在算法中,首先采用分裂方法和交替方向法将原问题变为两个相关的子问题,然后分别对 子问题利用牛顿法和原始-对偶算法。实验结果表明,与同类模型相比,本文方法无论是在视 觉效果还是定量指标,如峰值信噪比(PSNR)等都有明显地提高。     

基于图像分解的图像修复算法

针对传统变分模型在修复图像时易产生“阶梯效应”与细节模糊等问题,提出了一种基于图像分解的自适应二阶总广义变分和分数阶变分的图像修复算法。首先将待修复的目标图像分解为卡通部分与纹理部分,其中卡通对应目标图像的低、中频部分,因此利用抑制“阶梯效应”较好的二阶总广义变分模型对其进行修复;纹理对应其高频部分,因此利用对细节部分有增强效果的分数阶变分模型对其进行修复。由于文中所提到的修复模型均与线性鞍点结构下求取最优值的模型类似,因此在算法上均采用基于预解式的原始对偶算法对新模型进行求解。另外,为了取得更好的修复效果,文中设计了一个边缘指示算子来自适应地控制新模型的扩散,以更好地保护修复图像的边缘细节。实验结果表明:相比传统的TV、TGV修复模型,新模型的修复效果在主观视觉上显得更加自然,且在峰值信噪比与相关系数等客观评价指标上均有提高。     

全变分耦合图像去噪模型

针对TV模型去噪后图像容易产生“阶梯效应”的现象,提出一种全变分耦合图像去噪模型。首先,根据去噪过程中图像梯度的变化趋势,构造一个趋势保真项,该保真项不但能有效去除图像噪声,而且能抑制“阶梯效应”。然后用小波在频域里对图像进行系数分解,利用Canny算法的边缘检测特性,设计控制函数,控制能量的扩散方向,保持了TV模型和趋势保真项的优点,能够在保护图像边缘纹理等细节信息的同时,抑制“阶梯效应”。实验结果表明,新模型的峰值信噪比、结构相似度、视觉效果均有显著提高。另外,所提模型的运行时间较短。     

基于全变分理论的红外图像去噪

为了去除红外图像中的噪声,提出了一种基于全变分理论的去噪算法。该方法继承了经典全变分模型在去除噪声中保护边缘的优点,结合图像平滑扩散原理,得到了一个全新的扩散函数;同时引入了一个边缘检测算子,对正则项和忠诚项的相关参量进行了改进,使得修复后的图像大大避免了阶梯效应;最后对该算法的实现进行了推导。结果表明,该算法能够有效地去除噪声,并且避免了阶梯效应的产生。     

一种改进的二阶偏微分去噪模型

分析了基于二阶偏微分的扩散方程模型的基本原理,针对该模型在去噪的同时会产生阶梯效应的缺点,提出了一种基于图像结构信息的二阶偏微分去噪模型。在该模型中,在二阶偏微分的全变分模型的正则化项加入图像的切矢量和法矢量信息,并由此推导出相应的扩散方程,再对扩散方程的扩散强度因子进行修改。在实验中,将模型分别与基于二阶偏微分、四阶偏微分的全变分模型进行对比分析表明,实验结果证明该模型能有效地去除图像噪声,克服阶梯效应的产生,主观性能最优。     

自适应正则化项去除乘性噪声

针对乘性噪声去噪算法研究,乘性噪声多出现在合成孔径雷达、超声波和激光等相干图像系统中,与标准高斯加性噪声不同,乘性噪声符合瑞利和伽马分布函数。文中通过:(1)取对数把乘性噪声模型转变成相加形模型;(2)改进正则化项成为自适应扩散模型;(3)将数学模型应用于图像处理的实践当中。在解决了阶梯效应的同时保持了图像的边缘。     

基于梯度保真项的低剂量CT统计迭代重建算法

针对低剂量计算机断层扫描(Computed Tomography,CT)重建图像时容易出现明显条形伪影这一现象,提出一种基于梯度保真项的低剂量CT统计迭代重建算法。该算法克服了原始全变分(Total Variation,TV)模型在抑制条形伪影和噪声的同时引入阶梯效应的缺点,首先把梯度保真约束项和能够区分图像平滑区和细节区的边缘指示函数应用到TV模型中得到基于梯度保真项的自适应全变分模型,然后再把新模型与惩罚加权最小二乘(Penalized Weighted Least Square,PWLS)重建算法相结合,使用交替方向迭代法得到最终的图像。采用Shepp-Logan模型来验证算法的有效性,实验结果表明,该算法不仅可以有效地去除条形伪影,还可以较好地保护图像的边缘和细节信息。     

SAR图像去噪的分数阶多尺度变分PDE模型及自适应算法

在合成孔径雷达(SAR)图像相干斑噪声抑制中,保持图像的边缘和纹理是非常重要的。该文首先利用分数阶导数和负指数Sobolev空间对图像进行建模,建立了分数阶多尺度变分偏微分方程(PDE)模型,然后给出了模型参数自适应选择方法,并在此基础上提出了区域、尺度自适应的去噪算法。数值实验表明,新方法能在去除噪声,抑制图像的 阶梯效应,保持图像的边缘、纹理细节几个方面取得较好的效果。     

稀疏性正则化的图像泊松去噪算法

去除医学、天文图像中的泊松噪声是一个重要问题,基于图像在过完备字典下的稀疏表示,在BayesianMAP框架下建立了稀疏性正则化的图像泊松去噪凸变分模型,采用负log的泊松似然函数作为模型的数据保真项,模型中非光滑的正则项约束图像表示系数的稀疏性,并附加非负件约束,保证去噪图像的非负性.基于分裂Bregman方法,提出...     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

中国建立EB级存储实验室,致力云计算应用(英文)

正With the support of 863 programs,Sugon Information Industry Co.,Ltd.,set up a dawning EB-class storage laboratory to address massive data storage requirements and largescale cloud computing demonstration applications.The Dawning EB-class cloud storage system adopts advanced fault-tolerant architecture,efficient data fault-tolerant algorithms with user authentication and data encryption policies to deal with the"lost""wrong"and"stolen"problems of data for ensuring the reliability and safety of the EB-class storage system in the public network application environments.The Dawning EB-class Storage Laboratory taking advan-