A novel real-time scheme for (m,k)-firm streams in wireless sensor networks

The multimedia transmission based real-time applications have posed a big challenge to wireless sensor networks (WSNs) where both reliability and timeliness need to be guaranteed at the same time, to support an acceptable Quality of Service (QoS). The existing real-time routing protocols, however, are not able to meet the QoS requirements of realtime applications because of the inherent resource constraint of sensor nodes and instability of wireless communication. Therefore, we propose a real-time scheme in this paper, including a QoS-aware routing protocol and a set of fault recovery mechanisms, for (m,k)-firm based real-time applications over WSNs. A local status indicator which is specially devised for (m,k)-firm stream, is used for intermediate nodes to monitor and evaluate their local conditions. The proposed routing protocol takes into account of packet deadline, node condition and remaining energy of next hop, to make optimal forwarding decision. Additionally, according to the stream QoS and node condition, the proposed fault recovery mechanisms are utilized for nodes to handle the congestion, link failure and void problems occurred during transmission and remain the desired reliability and timeliness requirements. The proposed scheme has been well studied and verified through simulations. The results have proved the efficiency of the proposed scheme in terms of high successful transmission ratio, small end-to-end delay and long lifetime of network.     

Upstream congestion control in wireless sensor networks through cross-layer optimization

Congestion in wireless sensor networks not only causes packet loss, but also leads to excessive energy consumption. Therefore congestion in WSNs needs to be controlled in order to prolong system lifetime. In addition, this is also necessary to improve fairness and provide better quality of service (QoS), which is required by multimedia applications in wireless multimedia sensor networks. In this paper, we propose a novel upstream congestion control protocol for WSNs, called priority-based congestion control protocol (PCCP). Unlike existing work, PCCP innovatively measures congestion degree as the ratio of packet inter-arrival time along over packet service time. PCCP still introduced node priority index to reflect the importance of each sensor node. Based on the introduced congestion degree and node priority index, PCCP utilizes a cross-layer optimization and imposes a hop-by-hop approach to control congestion. We have demonstrated that PCCP achieves efficient congestion control and flexible weighted fairness for both single-path and multi-path routing, as a result this leads to higher energy efficiency and better QoS in terms of both packet loss rate and delay.     

Performance Analysis of Adaptive Routing Structure for Wireless Sensor Network Based on Load Balancing

Wireless sensor network consists of sensor nodes with battery operated device. The key challenges in the wireless sensor network are energy consumption and routing optimization. This work presents the cluster based load balancing (CBLB) routing protocol. The proposed routing protocol is used to minimize the energy consumption and increase the routing performance. It avoids the routing robustness, delay and increases the delivery rate and network performance. In existing techniques, different routing protocols such as LEACH, HEED and MESTER were used to increase the network performance and to decrease the energy consumption. But these existing techniques did not satisfy the performance requirements of wireless sensor networks. Hence, there is a requirement to develop a technique that meets the QoS requirements and needs of wireless sensor network. The proposed CBLB routing protocol creates a cluster head in the decentralized network and the cluster head will be used to distribute the workload evenly to the cluster members for reducing the energy consumption in wireless sensor network. Experimental results analyze the performance of the proposed protocol with the different existing protocols. The proposed protocol achieves high throughput, delivery rate and reduces the energy consumption, delay and routing overhead.     

QoS provisioning in wireless video sensor networks: a dynamic power management framework

Recent technological advances in microelectronics and nano-systems technologies have made it feasible to equip wireless sensor nodes with small low-cost cameras to capture and transmit video. Wireless video sensor networks are gaining popularity due to numerous potential applications such as video surveillance, environmental and habitat monitoring, and so on. However, due to the limited battery available in wireless video sensor nodes, provisioning of QoS in such a network is a challenging task. We provide a survey on the major issues related to QoS provisioning in wireless video sensor networks and possible solution approaches. A dynamic power management framework is proposed for a wireless video sensor node to improve energy saving performance so that the lifetime of the sensor node can be increased. This framework considers the video traffic arrival process in the sensor node, the sleep and wakeup processes in the camera and wireless transceiver electronics, the queue status, and the wireless channel condition. Performance analysis results show that the proposed mechanism can achieve considerable energy saving in a sensor node while providing a target level of QoS performance.     

基于功率分配的无线传感器网络拥塞控制协议

由于无线传感器网络的资源受限,相比传统网络其传输过程更容易导致丢包和拥塞。为了避免和控制拥塞,本文提出了一种利用功率分配重新选择路径的拥塞控制算法,首先参考路径传输的多种QoS相关参数度量网络的路径代价和节点可用资源的信息,基于测量得到的网络拥塞水平通过传输功率递增和递减选择不同的路径控制网络拥塞。仿真结果表明所提出的协议减少了网络时延,提高了系统吞吐量和网络生命周期。      

EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications

The wireless sensor network based IoT applications mainly suffers from end to end delay, loss of packets during transmission, reduced lifetime of sensor nodes due to loss of energy. To address these challenges, we need to design an efficient routing protocol that not only improves the network performance but also enhances the Quality of Service. In this paper, we design an energy-efficient routing protocol for wireless sensor network based IoT application having unfairness in the network with high traffic load. The proposed protocol considers three-factor to select the optimal path, i.e., lifetime, reliability, and the traffic intensity at the next-hop node. Rigorous simulation has been performed using NS-2. Also, the performance of the proposed protocol is compared with other contemporary protocols. The results show that the proposed protocol performs better concerning energy saving, packet delivery ratio, end-to-end delay, and network lifetime compared to other protocols.

     

Delay constraint multipath routing for wireless multimedia ad hoc networks

According to the disadvantages of real time and continuity for multimedia services in ad hoc networks, a delay constraint multipath routing protocol for wireless multimedia ad hoc networks, which can satisfy quality of service (QoS) requirement (QoS multipath optimized link state routing [MOLSR]), is proposed. The protocol firstly detects and analyzes the link delay among the nodes and collects the delay information as the routing metric by HELLO message and topology control message. Then, through using the improved multipath Dijkstra algorithm for path selection, the protocol can gain the minimum delay path from the source node to the other nodes. Finally, when the route is launched, several node‐disjoint or link‐disjoint multipaths will be built through the route computation. The simulation and test results show that QoS‐MOLSR is suitable for large and dense networks with heavy traffic. It can improve the real time and reliability for multimedia transmission in wireless multimedia ad hoc networks. The average end‐to‐end delay of QoS‐MOLSR is four times less than the optimized link state routing. Copyright © 2014 John Wiley & Sons, Ltd.     

Lightweight routing with dynamic interests in wireless sensor and actor networks

Wireless sensor and actor networks (WSANs) have been increasingly popular for environmental monitoring applications in the last decade. While the deployment of sensor nodes enables a fine granularity of data collection, resource-rich actor nodes provide further evaluation of the information and reaction. Quality of service (QoS) and routing solutions for WSANs are challenging compared to traditional networks because of the limited node resources. WSANs also have different QoS requirements than wireless sensor networks (WSNs) since actors and sensor nodes have distinct resource constraints.In this paper, we present, LRP-QS, a lightweight routing protocol with dynamic interests and QoS support for WSANs. LRP-QS provides QoS by differentiating the rates among different types of interests with dynamic packet tagging at sensor nodes and per flow management at actor nodes. The interests, which define the types of events to observe, are distributed in the network. The weights of the interests are determined dynamically by using a nonsensitive ranking algorithm depending on the variation in the observed values of data collected in response to interests. Our simulation studies show that the proposed protocol provides a higher packet delivery ratio and a lower memory consumption than the existing state of the art protocols.     

ECBRP: An Efficient Cluster-Based Routing Protocol for Real-Time Multimedia Streaming in MANETs

The dynamic characteristics of wireless networks and stringent QoS requirements of multimedia applications identify significant challenges for providing QoS guarantees for real-time multimedia streaming in such wireless environment. QoS routing protocols can decisively contribute to the QoS provision of network systems. This paper proposes an efficient cluster-based routing protocol (ECBRP) for real-time multimedia streaming in mobile ad hoc networks. First, to improve the stability of clusterheads, we introduce a new algorithm of cluster formation, in consideration of the node mobility and connectivity. Second, a link-broken detection mechanism is designed, which is able to distinguish whether packet loss is due to mobility or congestion, and to make proper reaction. This mechanism contributes to reduce route overhead, and to increase the decodable ratio of video frame at the application layer as well. Third, the routing protocol is enhanced via an adaptive packet salvage strategy, in order to alleviate the congestion in consideration of the characteristics of multimedia traffic. Our simulation experiment results demonstrate that the ECBRP leads to more stable cluster formation than the CBRP, and 80% decreases in the frequency of clusterhead changes against CBRP. As a result, the quality of real-time multimedia streaming is improved significantly, in terms of decodable frame ratio, delay and delay jitter, etc.     

An energy efficient and QoS aware routing protocol for wireless sensor and actuator networks

Wireless sensor and actuator networks are composed of sensor and actuator nodes interconnected via wireless links. The actuators are responsible for taking prompt decisions and react accordingly to the data gathered by sensor nodes. In order to ensure efficient actions in such networks, we propose a new routing protocol that provides QoS in terms of delay and energy consumption. The network is organized in clusters supervised by CHs (Cluster-Heads), elected according to important metrics, namely the energy capability, the riches of connectivity, which is used to select the CH with high node density, and the accessibility degree regarding all the actuators. The latter metric is the distance in number of hops of sensor nodes relative to the actuator nodes. This metric enhances more the network reliability by reducing the communication delay when alerting the actuator nodes, and hence, reducing the energy consumption. To reach efficiently the actuator nodes, we design a delay and energy sensitive routing protocol based on-demand routing approach. Our protocol incurs less delay and is energy efficient. We perform an evaluation of our approach through simulations. The obtained results show out performance of our approach while providing effective gain in terms of communication delay and energy consumption.     

Buffered fixed routing: a routing protocol for real-time transportin grid networks

We propose a new routing protocol called buffered fixed routing (BFR) for real-time applications on grid networks. While previous routing protocols for grid networks have been designed to improve network throughput, the BFR scheme is proposed to guarantee the end-to-end packet delay and sequencing without loss by using finite buffers at each node. Thus the proposed scheme can satisfy quality-of-service (QoS) requirements of real-time applications. The BFR scheme uses the token on the row ring to provide QoS guarantees. The performance of the BFR scheme is analyzed by using the Geom/Geom/1 queueing system under uniform traffic. In the simulation, the BFR scheme shows the zero-loss, high-throughput performance with the minimum delay variation compared to other routing protocols such as store and forward routing, deflection routing and vertical routing. In addition, it has shown the smallest average delay at intermediate and heavy loads     

Statistical Multipath Queue-Wise Preemption Routing for ZigBee-Based WSN

Nowadays, wireless sensor network (WSN) is an important component in IoT environment, which enables efficient data collection and transmission. Since WSN consists of a large number of sensor nodes, network congestion can easily occur which significantly degrades the performance of entire network. In this paper a novel scheme called SMQP (Statistical Multipath Queue-wise Preemption) routing is proposed to balance the load and avoid the congestion for ZigBee-based WSN. This is achieved by employing statistical path scheduling and queue-wise preemption with multiple paths between any source and destination node. NS2 simulation reveals that the proposed scheme significantly improves the QoS in terms of delivery ratio, end-to-end delay, and packet delivery ratio compared to the representative routing schemes for WSN such as ad hoc on-demand distance vector and ad hoc on-demand multipath distance vector scheme.     

A Delay-Aware Wireless Sensor Network Routing Protocol for Industrial Applications

With the rapid development of information communication technologies, industrial manufacturing environments and requirements have changed considerably. Since wireless sensor networks have become more and more popular, our production chains have improved with respect to efficiency, flexibility and security. On the other hand, building a secure, robust and fast network is an essential issue for enterprises. In the past, few experts focused on this issue of industrial applications and most of solutions proposed are not suitable for industrial environments. In this paper, we propose a real-time routing protocol for mobile wireless sensor nodes in industrial environments, which offers superior quality of service in terms of delay time. We use geographic routing and information contained in the nodes routing table to extract location information. Then we calculate the node which is nearest to the target node to reduce hop counts and achieve fast data package transfers. It optimizes the packets forwarding hops, which in turn reduces the delay time effectively. We used OPNET to analyze our protocol and results indicate that this algorithm is useful and suitable for wireless sensor networks     

Reliable and energy aware query-driven routing protocol for wireless sensor networks

Wireless sensor networks become very attractive in the research community, due to their applications in diverse fields such as military tracking, civilian applications and medical research, and more generally in systems of systems. Routing is an important issue in wireless sensor networks due to the use of computationally and resource limited sensor nodes. Any routing protocol designed for use in wireless sensor networks should be energy efficient and should increase the network lifetime. In this paper, we propose an efficient and highly reliable query-driven routing protocol for wireless sensor networks. Our protocol provides the best theoretical energy aware routes to reach any node in the network and routes the request and reply packets with a lightweight overhead. We perform an overall evaluation of our protocol through simulations with comparison to other routing protocols. The results demonstrate the efficiency of our protocol in terms of energy consumption, load balancing of routes, and network lifetime.     

Energy-aware on-demand scatternet formation and routing for Bluetooth-based wireless sensor networks

Bluetooth is a promising short-range wireless communication technology with the characteristics of interference resilience and power efficiency, both desirable for wireless sensor networks. The new Intel Mote sensor devices have Bluetooth technology incorporated as the standard wireless communications interface. When using Bluetooth in applications where multihop routing is required, groups of Bluetooth piconets combine together to form a scatternet. However, most of the existing scatternet formation protocols are designed to facilitate communications between any two pairs of devices, regardless of the actual traffic demand pattern. For wireless sensor network applications with low-duty-cycle traffic patterns, an on-demand scatternet formation protocol can achieve significant power saving by avoiding unnecessary network connectivity. To that end, we introduce an on-demand scatternet and route formation protocol designed specifically for Bluetooth-based wireless sensor networks. Our protocol builds a scatternet on demand, and is able to cope with multiple sources initiating traffic simultaneously. In addition, our energy-aware forwarding nodes selection scheme is based on local information only, and results in more uniform network resource utilization and improved network lifetime. Simulation results show that our protocol can provide scatternet formation with reasonable delay and good load balance, which results in prolonged network lifetime for Bluetooth-based wireless sensor networks.     

A New Dynamic Energy Efficient Latency Improving Protocol for Wireless Sensor Networks

In delay sensitive applications of wireless sensor network, it is required to monitor the situation continuously with the sensors. The continuous operation and processing delay, may contribute latency in data communication. This results in more energy consumption of the sensor nodes. It is difficult to replace the battery of a sensor node, after the deployment in the network. The efficient energy management and low latency are the important issues in delay sensitive applications as they affect the life of network. There are some limitations in existing routing protocols as they are particularly designed either for energy efficiency or minimum latency. This paper presents the new protocol to overcome some drawbacks of the existing protocols. A concept of distance metric based routing is explored for shortest routing path selection. This helps to reduce the overhead of the network traffic, which results in improvement of energy efficiency and latency. The simulation results are compared with standard ‘AODV’ routing protocol. It is observed that, this ‘Dynamic Energy Efficient and Latency Improving Protocol’ will be very much suitable for wireless sensor networks in industrial control applications.     

An Energy-Efficient Routing Protocol for Event-Driven Dense Wireless Sensor Networks

The routing energy efficiency of a wireless sensor network is a crucial issue for the network lifetime. In this article, we propose MICRO (MInimum Cost Routing with Optimized data fusion), an energy-efficient routing protocol for event-driven dense wireless sensor networks. The proposed routing protocol is an improvement over the formerly proposed LEACH and PEGASIS protocol, which is designed to be implemented mainly with node computations rather than mainly with node communications. Moreover, in the routing computation the proposed scheme exploits a new cost function for energy balancing among sensor nodes, and uses an iterative scheme with optimized data fusions to compute the minimum-cost route for each event-detecting sensor node. Compared to the PEGASIS routing protocol, MICRO substantially improves the energy-efficiency of each route, by optimizing the trade-off between minimization of the total energy consumption of each route and the balancing of the energy state of each sensor node. It is demonstrated that the proposed protocol is able to outperform the LEACH and the PEGASIS protocols with respect to network lifetime by 100–300% and 10–100%, respectively.     

Throughput Evaluation of a Novel Scheme to Mitigate the Congestion over WSNs

In recent years, due to fast development of wireless sensor networks (WSNs), the numbers of nodes are increasing, and their scope of applications is continuously expanding, including environmental monitoring, military and smart home applications. The power supply, memory and computing power of wireless sensor nodes are greatly hampered in WSNs so that the WSNs are classified as a task-oriented framework. This study focused on exploring problems caused by traffic congestion on the WSNs with a large amount of flow, such as packet loss, bandwidth reduction, and waste of energy on the sensor nodes. On the other hand, a cooperative strong node mechanism is presented and named as Cooperative Strong Node Mechanism, in which a threshold is set to determine whether the node traffic is over or not. When the load exceeds, the privilege of corresponding sensor nodes is upgraded so that it can command its child nodes to change the transmission path to distribute the traffic effectively. Furthermore, when the traffic exceeds preset overall network flow, new sensor nodes are added in the network to relieve the traffic. This novel proposed mechanism can not only increase network throughput and effectively prevent the occurrence from congestion problems, but is suitable for a variety of routing protocols.     

QoS Routing for Mesh-Based Wireless LANs

Wireless LANs with their increased data rate become an attractive technology for connecting mobile users to the Internet. Efficient deployment of wireless LANs will require the ability to extend the wireless LANs coverage without the need to deploy a very large number of access points. Mesh-based wireless LANs are an attractive solution to this problem. These networks extend wireless LAN coverage by using each node in the network as a router, resulting in a multihop topology. In this paper we introduce a novel routing algorithm, wireless mesh routing (WMR), that provides quality-of-service (QoS) support and accounts for the characteristics of both infrastructure-based wireless LANs and ad hoc networks. The algorithm is validated using the OPNET modeler. The simulation results show that the mesh network using WMR protocol can provide QoS support and react dynamically to the network status changes with low control overheads. Using the proposed software architecture the proposed routing protocol can be implemented with any MAC protocol, resulting in easy implementation in existing wireless nodes.     

无线传感网络中基于蚁群的路由算法

In the wireless sensor networks, high efficient data routing for the limited energy resource networks is an important issue. By introducing Ant-colony algorithm, this paper proposes the wireless sensor network routing algorithm based on LEACH. During the construction of sensor network clusters, to avoid the node premature death because of the energy consumption, only the nodes whose residual energy is higher than the average energy can be chosen as the cluster heads. The method of repeated division is used to divide the clusters in sensor networks so that the numbers of the nodes in each cluster are balanced. The basic thought of ant-colony algorithm is adopted to realize the data routing between the cluster heads and sink nodes, and the maintenance of routing. The analysis and simulation showed that the proposed routing protocol not only can reduce the energy consumption, balance the energy consumption between nodes, but also prolong the network lifetime.