Energy-Efficient Routing Algorithm Based on Unequal Clustering and Connected Graph in Wireless Sensor Networks

Clustering and multi-hop routing algorithms substantially prolong the lifetime of wireless sensor networks (WSNs). However, they also result in the energy hole and network partition problems. In order to balance the load between multiple cluster heads, save the energy consumption of the inter-cluster routing, in this paper, we propose an energy-efficient routing algorithm based on Unequal Clustering Theory and Connected Graph Theory for WSN. The new algorithm optimizes and innovates in two aspects: cluster head election and clusters routing. In cluster head election, we take into consideration the vote-based measure and the transmission power of sensor nodes when to sectionalize these nodes into different unequal clusters. Then we introduce the connected graph theory for inter-cluster data communication in clusters routing. Eventually, a connected graph is constituted by the based station and all cluster heads. Simulation results show that, this new algorithm balances the energy consumption among sensor nodes, relieves the influence of energy-hole problem, improve the link quality, achieves a substantial improvement on reliability and efficiency of data transmission, and significantly prolongs the network lifetime.     

Energy-balanced unequal clustering protocol for wireless sensor networks

Clustering provides an effective way to prolong the lifetime of wireless sensor networks.One of the major issues of a clustering protocol is selecting an optimal group of sensor nodes as the cluster heads to divide the network.Another is the mode of inter-cluster communication.In this paper,an energy-balanced unequal clustering(EBUC)protocol is proposed and evaluated.By using the particle swarm optimization(PSO)algorithm,EBUC partitions all nodes into clusters of unequal size,in which the clusters closer to the base station have smaller size.The cluster heads of these clusters can preserve some more energy for the inter-cluster relay traffic and the 'hot-spots' problem can be avoided.For inter-cluster communication,EBUC adopts an energy-aware multihop routing to reduce the energy consumption of the cluster heads.Simulation results demonstrate that the protocol can efficiently decrease the dead speed of the nodes and prolong the network lifetime.     

Multi-factor and Distributed Clustering Routing Protocol in Wireless Sensor Networks

One of important issues in wireless sensor networks is how to effectively use the limited node energy to prolong the lifetime of the networks. Clustering is a promising approach in wireless sensor networks, which can increase the network lifetime and scalability. However, in existing clustering algorithms, too heavy burden of cluster heads may lead to rapid death of the sensor nodes. The location of function nodes and the number of the neighbor nodes are also not carefully considered during clustering. In this paper, a multi-factor and distributed clustering routing protocol MFDCRP based on communication nodes is proposed by combining cluster-based routing protocol and multi-hop transmission. Communication nodes are introduced to relay the multi-hop transmission and elect cluster heads in order to ease the overload of cluster heads. The protocol optimizes the election of cluster nodes by combining various factors such as the residual energy of nodes, the distance between cluster heads and the base station, and the number of the neighbor nodes. The local optimal path construction algorithm for multi-hop transmission is also improved. Simulation results show that MFDCRP can effectively save the energy of sensor nodes, balance the network energy distribution, and greatly prolong the network lifetime, compared with the existing protocols.     

An efficient cluster-based communication protocol for wireless sensor networks

A wireless sensor network is a network of large numbers of sensor nodes, where each sensor node is a tiny device that is equipped with a processing, sensing subsystem and a communication subsystem. The critical issue in wireless sensor networks is how to gather sensed data in an energy-efficient way, so that the network lifetime can be extended. The design of protocols for such wireless sensor networks has to be energy-aware in order to extend the lifetime of the network because it is difficult to recharge sensor node batteries. We propose a protocol to form clusters, select cluster heads, select cluster senders and determine appropriate routings in order to reduce overall energy consumption and enhance the network lifetime. Our clustering protocol is called an Efficient Cluster-Based Communication Protocol (ECOMP) for Wireless Sensor Networks. In ECOMP, each sensor node consumes a small amount of transmitting energy in order to reach the neighbour sensor node in the bidirectional ring, and the cluster heads do not need to receive any sensed data from member nodes. The simulation results show that ECOMP significantly minimises energy consumption of sensor nodes and extends the network lifetime, compared with existing clustering protocol.     

Dual head static clustering algorithm for wireless sensor networks

Clustering of nodes is often used in wireless sensor networks to achieve data aggregation and reduce the number of nodes transmitting the data to the sink. This paper proposes a novel dual head static clustering algorithm (DHSCA) to equalise energy consumption by the sensor nodes and increase the wireless sensor network lifetime. Nodes are divided into static clusters based on their location to avoid the overhead of cluster re-formation in dynamic clustering. Two nodes in each cluster, selected on the basis of the their residual energy and their distance from the sink and other nodes in the cluster, are designated as cluster heads, one for data aggregation and the other for data transmission. This reduces energy consumption during intra-cluster and inter-cluster communication. A multi-hop technique avoiding the hot-spot problem is used to transmit the data to the sink. Experiments to observe the energy consumption patterns of the nodes and the fraction of packets successfully delivered using the DHSCA suggest improvements in energy consumption equalisation, which, in turn, enhances the lifetime of the network. The algorithm is shown to outperform all the other static clustering algorithms, while being comparable with the performance of the best dynamic algorithm.     

A Pre-Determined Nodes Deployment Strategy of Two-Tiered Wireless Sensor Networks Based on Minimizing Cost

Nodes deployment is a fundamental factor in determining the connectivity, coverage, lifetime and cost of wireless sensor networks. In this paper, a two-tiered wireless sensor networks consisting of sensor clusters and a base station is considered. Within a sensor cluster, there are many sensor nodes and a relay node. We focus on the deployment strategy for sensor nodes and relay nodes to minimize cost under some constraints. Several means are used. The regular hexagonal cell architecture is employed to build networks. Based on the analysis of energy consumption of sensors and cost of network, an integer programming model is presented to minimize the cost. By the model, number of layers of sensor cluster is determined. In order to balance the energy consumption of sensors on the identical layer, a uniform load routing algorithm is used. The numerical analysis and simulation results show that the waste of energy and cost of wireless sensor networks can be effectively reduced by using the strategy.     

基于CMRA路由协议改进算法

为了延长无线传感网络的生存时间,需要设计满足高效率、低功耗的路由算法。一种CMRA（intercluster head multi-hop routing algorithm）算法被提出来,这种算法通过节点通信能量消耗模型建立最小能量路径树,但CMRA对于簇头选择的能量分配不均衡,造成簇头结点负载过重。提出一种新的路由算法CMRA-EE（CMRA-energy efficient）,在簇头选举阶段引入节点能量参数,同时将簇头节点能量与距离作为代价参数,从而平衡了网络节点能耗。通过仿真对CMRA-EE算法进行性能分析与评价,结果显示,CMRA-EE算法在延长无线传感网有效生存时间方面比CMRA算法有了明显的改善。     

A Green Clustering Protocol for Mobile Sensor Network Using Particle Swarm Optimization

Energy consumption of sensor nodes is one of the crucial issues in prolonging the lifetime of wireless sensor networks. One of the methods that can improve the utilization of sensor nodes batteries is the clustering method. In this paper, we propose a green clustering protocol for mobile sensor networks using particle swarm optimization (PSO) algorithm. We define a new fitness function that can optimize the energy consumption of the whole network and minimize the relative distance between cluster heads and their respective member nodes. We also take into account the mobility factor when defining the cluster membership, so that the sensor nodes can join the cluster that has the similar mobility pattern. The performance of the proposed protocol is compared with well-known clustering protocols developed for wireless sensor networks such as LEACH (low-energy adaptive clustering hierarchy) and protocols designed for sensor networks with mobile nodes called CM-IR (clustering mobility-invalid round). In addition, we also modify the improved version of LEACH called MLEACH-C, so that it is applicable to the mobile sensor nodes environment. Simulation results demonstrate that the proposed protocol using PSO algorithm can improve the energy consumption of the network, achieve better network lifetime, and increase the data delivered at the base station.     

An unequal cluster-based routing scheme for multi-level heterogeneous wireless sensor networks

In wireless sensor networks (WSNs), clustering can significantly reduce energy dissipation of nodes, and also increase communication load of cluster heads. When multi-hop communication model is adopted in clustering, “energy hole” problem may occur due to unbalanced energy consumption among cluster heads. Recently, many multi-hop clustering protocols have been proposed to solve this problem. And the main way is using unequal clustering to control the size of clusters. However, many of these protocols are about homogeneous networks and few are about heterogeneous networks. In this paper, we present an unequal cluster-based routing scheme for WSNs with multi-level energy heterogeneity called UCR-H. The sensor field is partitioned into a number of equal-size rectangular units. We first calculate the number of clusters in each unit by balancing energy consumption among the cluster heads in different units. And then we find the optimal number of units by minimizing the total energy consumption of inter-cluster forwarding. Finally, the size of clusters in each unit is elaborately designed based on node’s energy level and the number of clusters in this unit. And a threshold is also designed to avoid excessive punishment to the nodes with higher energy level. Simulation results show that our scheme effectively mitigates the “energy hole” problem and achieves an obvious improvement on the network lifetime.     

一种改进的基于时间竞争成簇的路由算法

为平衡无线传感器网络中的簇头负载并进一步降低多跳传输能耗,文中提出了一种改进的基于时间竞争成簇的路由算法。该算法通过限制近基站节点成簇入簇,以防止近基站节点成簇入簇的节能收益无法补偿成簇入簇能耗;利用基站广播公共信息和基于时间机制成簇,以减少节点基本信息交换能耗;通过候选簇头中继来平衡簇头负载。候选簇头的评价函数综合考虑了剩余能量和最优跳数的理想路径,以期在保持中继负载平衡的基础上尽量降低多跳能耗。仿真结果显示,该算法较LEACH和DEBUC算法延长了以30%节点死亡为网络失效的网络生存周期,表明该算法在降低节点能耗和平衡负载方面是有效的。