Ad hoc网络两种按需路由协议性能分析

Ad hoc网络是一种无需依赖于事先布设的基础设施,而仅依靠网络内部节点之间的协作,就能够完成节点间通信的网络。比较了Ad hoc网络两种主流的按需路由协议：动态源路由协议,自组网按需距离矢量路由协议。使用基于ns-2的仿真模型进行仿真,并通过分组交付率、平均端到端时延、标准化路由负荷、对两种按需路由协议进行评估。实验结果表明即使DSR和AODV协议都是按需路由协议,但它们采取的路由机制的不同,导致它们的性能表现的巨大差异。     

AODV、AOMDV和AODV-UU路由协议性能仿真与分析

使用NS-2(Network Simulator Version 2)仿真软件,选取分组投递率、端到端平均时延、归一化路由开销和路由发现频率4个指标对按需距离矢量路由(AODV,Ad hoc On-Demand Distance Vector Routing)、多径按需距离矢量路由(AOMDV,Ad Hoc On-Demand Multipath Distance Vector Routing)和乌普萨拉大学开发的按需距离矢量路由(AODV-UU,Ad Hoc On-Demand Distance Vector Routing developed by Uppsala University)进行了性能仿真,通过改变节点最大运动速度和业务源连接对数分析比较这些参数对3个协议性能的影响,研究结果表明了AODV-UU协议的优越性。并提出了对AODV-UU协议的改进。     

基于AODV协议的航空自组网仿真与分析

介绍NS2仿真软件,分析了按需距离矢量（AODV）路由协议的特点和基本构成,建立了航空自组网络模型。基于AODV路由协议,通过对数据报文投递率、端到端平均延时、路由负载3个网络连通性能参数的定量分析研究,得到了仿真结果并进行性能分析。结果表明：只有建立合适的航空自组网络模型,选定与之匹配的路由协议,设定合理的网络连通性能参数,才能使航空自组网络发挥出最佳性能效果。     

无线传感器网络路由协议的设计与实现

针对传统路由协议端到端时延长、丢包率过高的现实问题,提出了一种基于贪婪转发的能量感知多路径路由协议(Greedy Forward Energy-aware Multipath Routing Protocol,GFEMRP)。GFEMRP从传感器起始结点出发,如果遇到网络黑洞则选择周边转发方式,否则将选择吞吐量大、且更接近于目的结点的结点作为下一跳结点。利用了OMNET++5.0和INET框架对包括无线自组网按需平面距离向量路由协议(Ad hoc on-demand distance vector routing protocol,AODV),动态按需无线自组织网络(Dynamic MANET On-demand,DYMO),贪婪周边无状态路由无线网络(Greedy Perimeter Stateless Routing for Wireless Networks,GPSR)和GFEMRP协议在内的四种路由协议进行了仿真和比较,实验结果表明GFEMRP协议具有良好的端到端时延、丢包率等性能。     

Ad Hoc网络路由协议性能分析

介绍了移动自组网的表驱动和按需驱动两类路由协议.提出了定量评估网络路由协议性能的六个基本指标.利用网络仿真器NS-2,对四种典型的路由协议(DSR、DSDV、AODV和TORA)建立仿真模型,配置仿真参数,并进行了仿真.对仿真过程产生的文档进行处理,分析,比较它们的性能指标.试验结果表明,模型仿真结果接近理论分析和实际情况,该方法在路由协议研究,设计与仿真方面具有较强的实用性和通用性.     

移动Ad hoc网络负载的NS2仿真分析

网络负载问题是移动Ad hoc路由算法的研究重点。通过设置不同发送数据频率和不同网络连接度来改变网络负载,利用NS2仿真Ad hoc路由协议分析性能参数：分组投递率、平均端到端延迟和路由开销,对不同负载下的网络性能进行研究。结果表明,在网络负载较小情况下,3种路由协议下的网络相差不大,当网络繁忙时,按需距离矢量路由协议...     

Ad Hoc网络路由协议研究及其性能比较

介绍和分析了当前Ad Hoc网络中的主要路由协议算法,在Linux下使用网络仿真软件NS2评价Ad Hoc路由协议中的距离矢量路由协议、临时排序路由算法、动态源路由协议和Ad Hoc按需距离矢量路由协议,编写了用于仿真实现的脚本程序,并对仿真结果进行了分析比较和性能评价,由此得出不同协议的特性及其适用范围。     

移动Ad Hoc网络路由协议性能仿真对比分析

基于OPNET仿真平台,通过考察节点移动速度、节点移动暂停时间、节点密度和发包间隔对路由协议性能的影响,全面地研究了移动AdHoe网络中典型路由协议的性能。为了公平地对比按需驱动类路由协议和表驱动类路由协议,采用了归一化路由负载作为路由开销的性能指标,最后对3个方面的路由协议性能进行对比和分析。结果表明,仿真结果和理论分析是相符的,因此采用的方法是正确的。     

MANET中两种反应式路由协议效能评估

移动自组织网络是由无线移动节点形成的一个没有任何独立基础设施的临时性网络。移动自组织网络具有无线连接、拓扑结构不断变化、分布式操作和易于部署的特点。文章通过VRNET软件比较了MANET中AODV和DSR两种反应式路由协议的性能。这两种协议均属于按需路由协议,但是协议内部不同的机制导致了两种协议具有显著的性能差异。我们通过包交换率、吞吐量、平均端到端延迟3个指标在UDP和TCP两种模式下分析了协议的性能,并在VRNET中进行了详细的仿真。用于性能分析的指标有包交换率、吞吐量、平均端到端延迟。     

Ad Hoc网络中两种按需路由协议的比较

Ad hoc网络的特征是多跳的无线连接，网络拓扑的频繁变化，以及需要有效的动态路由协议。重点比较Ad hoc网络中两种主要的按需路由协议：动态源路由（DSR）协议和Ad hoc按需距离矢量路由（AODV）协议。尽管DSR和AODV都是按需路由协议，但不同的协议机制导致了网络性能的显著差异。在OPNET仿真平台下，对采用不用路由协议的网络时延和吞吐量进行比较，从而分析不同的路由机制引起的网络性能差异。     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

Call for Papers

正Communications—VLSI Researches and industries of telecommunications have been growing rapidly in the last 20 years and will keep their high growing pace in the next decade.The involved researches and developments cover mobile communications,highway and last-mile broadband communication,domain specific communications,and emerging D2D M2M communications.Radio communication steps into its