龙泉山断裂带地震活动性浅析

通过对龙泉山断裂带东坡断裂和西坡断裂的地震活动性研究,表明该带是一条活断层。历史地震记载和现今地震活动均呈现沿断裂带分布,地震活动呈现周期性和南北跳迁的特点,近10年来地震监测资料表明该带地震活动在增强。     

川滇地区主要活动断裂的活动特征及其近十年的地震活动性

以近10几年的地震目录为基础,对川滇地区主要断裂带GSHAP地震危险性评估的预测结果与近十几年来的实际地震活动性进行了对比。结果表明,小江断裂以东的昭通地区以及滇西内弧带中段的哈巴和玉龙雪山东麓断裂带近年来的地震活动性较强,与GSHAP的评估相符;龙门山断裂带和怒江断裂以西的盈江地区近年的地震活动性较强,其活动性在GSHAP中被低估;而在GSHAP中确定的高危地区,如澜沧江断裂、小江断裂、红河断裂、鲜水河断裂周边区域,近十几年内的构造活动低于预期,如红河断裂与澜沧江断裂近年来的地震活动性较弱,而怒江断裂只在南端的保山等地区有较强的地震活动性。     

东昆仑断裂带地震复发间隔及地震危险性

东昆仑断裂带是青藏高原东北部一条重要的活动断裂, 构成了巴颜喀拉块体的北边界。 根据阿尼玛卿山两侧滑动速率和历史地震的差异, 将断裂带分为东西两个部分。 滑动速率由西向东递减, 近百年的历史地震产生的破裂基本覆盖了西部和东部的一部分。 随着巴颜喀拉块体周缘强震的持续发生, 作为块体北边界的东昆仑断裂带的地震空区及地震潜势研究变得更加重要。 近些年通过对东昆仑断裂带不同段的研究得到了较多的滑动速率和古地震序列数据, 为评价断裂带未来百年地震危险性提供了有利条件。 利用NB模型中的对数正态分布方法, 得到了东昆仑断裂带在未来100 a的发震概率, 研究表明, 东部(玛曲段)发震概率相对较高, 需要进一步关注。     

鲜水河断裂带北西段不同破裂源强震震级（M≥67）及复发间隔研究

鲜水河断裂带是四川西部一条晚第四纪强烈左旋走滑活动的构造带，历史上发生多次强震. 它与西北侧的甘孜—玉树断裂带一起，构成青藏高原东部的侧向滑移构造系统中的川滇活动地块的北边界——羌塘地块的东北边界. 鲜水河断裂带北西段可以分成4个段落，每一段落均可作为一个独立的基本破裂单元而发生地震破裂，亦有可能发生不同尺度的多段联合瞧裂. 对鲜水河断裂带北西段不同尺度破裂的震级及复发间隔进行研究. 根据该地区的地质、地球物理、测量及地震等方面的资料，结合我国强震复发的特点，分析了拉分盆地内部的滑动速率分布，以确定各段落的等效长度和倾向宽度，从而建立适合我国大陆走滑断裂的面波震级与断裂发震面积的关系式；进而运用地震矩方法，考虑断层之间的相互作用，结合专家意见建立了该段的矩平衡断裂破裂模型；最后，给出了鲜水河断裂带北西段各破裂源特征化地震的复发间隔、震级大小和不确定性，以及他与中小地震的联合震级分布. 结果表明，鲜水河断裂带北西段较易发生单段破裂，复发间隔在100～150年左右.     

鲜水河断裂带北西段不同破裂源强震震级（M≥67）及复发间隔研究

鲜水河断裂带是四川西部一条晚第四纪强烈左旋走滑活动的构造带，历史上发生多次强震. 它与西北侧的甘孜—玉树断裂带一起，构成青藏高原东部的侧向滑移构造系统中的川滇活动地块的北边界——羌塘地块的东北边界. 鲜水河断裂带北西段可以分成4个段落，每一段落均可作为一个独立的基本破裂单元而发生地震破裂，亦有可能发生不同尺度的多段联合瞧裂. 对鲜水河断裂带北西段不同尺度破裂的震级及复发间隔进行研究. 根据该地区的地质、地球物理、测量及地震等方面的资料，结合我国强震复发的特点，分析了拉分盆地内部的滑动速率分布，以确定各段落的等效长度和倾向宽度，从而建立适合我国大陆走滑断裂的面波震级与断裂发震面积的关系式；进而运用地震矩方法，考虑断层之间的相互作用，结合专家意见建立了该段的矩平衡断裂破裂模型；最后，给出了鲜水河断裂带北西段各破裂源特征化地震的复发间隔、震级大小和不确定性，以及他与中小地震的联合震级分布. 结果表明，鲜水河断裂带北西段较易发生单段破裂，复发间隔在100～150年左右.     

2014年于田7.3级地震的发震构造及动力学背景的初步分析

2004年2月12日新疆维吾尔自治区于田县发生了Ms7.3级地震,其发震断裂为阿尔金断裂带西南段的贡嘎错断裂带.由于地处高山无人区,存在区域历史地震漏记,但1970年以来5级以上地震活动是完整的,近20年来强震活动增强.综合分析认为,2008年于田Ms7.3地震可能加速了本次地震的发生.根据经验统计关系估计,2014年于田地震的同震地表破裂为30-40km,最大水平位错量为1.0-1.5m,地震的复发周期为300-400年.通过阿尔金断裂上前人资料和区域构造的综合分析,认为2014年于田地震是在青藏高原向北东运动背景下左旋走滑的阿尔金断裂向南西端扩展的结果.     

辽宁省及邻近地区主要地震构造及其危险性判定

辽宁省及邻近地区的地震活动主要集中在海城地震区、下辽河—辽东湾、鸭绿江口和辽东半岛西侧的金州断裂沿线,地震活动与地质构造之间具有高度的相关性,明显受到了NE—NNE向和NW向两组构造的制约,构造交会部位亦即地震活动条带的结点是破坏性地震的多发区。研究表明,金州断裂盖州北—鞍山段、海城河断裂、鸭绿江断裂西支东港以南段等6条地震构造(段)是区内危险性最高的地震构造,按照4级划分原则,可将其确定为高危险等级;金州断裂金州—普兰店段、郯庐断裂带渤中北—辽东湾段、依兰—伊通断裂铁岭—开原北段等10条地震构造(段)确定为较高危险等级;郯庐断裂带下辽河段、医巫闾山西侧断裂等4条地震构造(段)危险等级一般,其它地震构造(段)的危险性较低。     

金沙江断裂带新活动和巴塘6.5级地震震中的确定

作者通过对区域地质调查资料的分析研究和实地考察,对金沙江断裂带的展布范围进行了划分,认为金沙江断裂带是川西规模巨大的断裂带,从地震活动、断裂地貌特征、水系扭曲、第四纪地层形变和温泉沿断裂分布等表明它是一个活动断裂带。通过对历史地震实地访问调查,获得了1923年巴塘6.5级地震的震害情况,并发现了这次地震在地表所产生的地裂缝,从而确定了这次地震的宏观震中位置,探讨了地震与断裂的关系。无疑对金沙江断裂带活动性的认识、地震预报和地震烈度区划工作具有现实意义。     

东昆仑断裂带东段塔藏断裂几何结构及滑动递减模型讨论

塔藏断裂位于东昆仑断裂带东段,长约170km,与岷山断裂带共同构成巴颜喀拉块体的东北构造边界,中部与岷江断裂、荷叶断裂、虎牙断裂的北延段交会,构成岷山隆起的地貌边界。通过卫星影像解译结合构造地貌调查,确定了断层属于全新世活动断层,并利用断层走向弯曲和活动性、阶区等标志将塔藏断裂分为三段。西段为罗叉段,总体走向NWW,西侧与玛曲断裂形成左行左阶拉分区,东侧在下黄寨村走向顺时针偏转至东北村段。中段为东北村段,总体走向NW,东侧在九寨沟口附近走向逆时针偏转至马家磨段。东段为马家磨段,总体走向NWW,西侧隔荷叶断裂、虎牙断裂的北延段与中段相接。东北村段以岷江断裂斜交点为界可分为南北两个次级段,马家磨段以阶区为界划分为扎如次段、唐寨次段、勿角次段。罗叉段和马家磨段的地震离逝时间较近,东北村段相对较远。断裂带整体呈反"S"形,自西向东滑动速率总体呈减小趋势,大部分水平变形转化为垂向的岷山隆升。结合不同段上的滑动速率,发现东昆仑断裂东段滑动速率呈梯度下降特征与东昆仑断裂带东段断层弯曲的几何特征相对应。     

西秦岭北缘断裂带的位移累积滑动亏损特征及其破裂分段性研究

根据西秦岭北缘断裂带的水平位移分组特征,定量计算了断裂端部和不连续部位的位移累积滑动亏损率,同时结合断裂带上的障碍体规模,滑动速率的差异,历史地震及古地震特征等,对断裂带进行了破裂分段性研究,结果表明,西秦岭北缘断裂带可以划分为鸳凤断裂,漳县断裂,锅麻滩断裂３条一级破裂段,６条二级破裂段。     

NUMERICAL SIMULATION OF DEFORMATION MOVEMENT AND STRESS ACCUMULATION IN LONGMENSHAN AND ITS ADJACENT FAULTS BEFORE WENCHUAN EARTHQUAKE

In order to reveal the deformation and cumulative stress state in Longmenshan and its adjacent faults before Wenchuan earthquake,a 3D viscoelastic finite element model,which includes Longmenshan,Longriba,Minjiang and Huya faults is built in this paper.Using the GPS measurement results of 1999-2004 as the boundary constraints,the deformation and movement of Longmenshan fault zone and its adjacent zones before Wenchuan earthquake are simulated.The conclusions are drawn in this paper as follows:First,velocity component parallel to Longmenshan Fault is mainly absorbed by Longriba Fault and velocity component perpendicular to the Longmenshan Fault is mainly absorbed by itself.Because of the barrier effect of Minjiang and Huya faults on the north section of Longmenshan Fault,the compression rate in the northern part of Longmenshan Fault is lower than that in the southern part.Second,extending from SW to NE direction along Longmenshan Fault,the angle between the main compressive stress and the direction of the fault changes gradually from the nearly vertical to 45 degrees. Compressive stress and shear stress accumulation rate is high in southwest segment of Longmenshan Fault and compressive stress is greater;the stress accumulation rate is low and the compressive stress is close to shear stress in the northeast segment of the fault.This is coincident with the fact that small and medium-sized earthquakes occurred frequently and seismic activity is strong in the southwest of the fault,and that there are only occasional small earthquakes and the seismic activity is weak in the northeast of the fault.It is also coincident with the rupture type of thrust and right-lateral strike-slip of the Wenchuan earthquake and thrust of the Lushan earthquake.Third,assuming that the same type and magnitude of earthquake requires the same amount of stress accumulation,the rupture of Minjiang Fault,the southern segment of Longmenshan Fault and the Huya Fault are mainly of thrust movement and the earthquake recurrence period of the three faults increases gradually.In the northern segment of Longriba Fault and Longmenshan Fault,earthquake rupture is of thrusting and right-lateral strike-slip. The earthquake recurrence period of former is shorter than the latter.In the southern segment of Longriba Fault,earthquake rupture is purely of right-lateral strike-slip,it is possible that the earthquake recurrence period on the fault is the shortest in the study region.     

2011—2014年3次于田MS≥5.0地震序列重定位及其发震构造

基于新疆区域数字地震台网震相观测报告,采用双差定位方法对2011—2014年阿尔金断裂带西南端NE向张性剪切段附近的3次于田M_S≥5.0地震序列进行了重定位,并对其余震分布及发震构造等进行了分析． 结果表明: 2011年于田M_S5.5地震的发震构造为阿尔金断裂,该地震同时触发了阿尔金山前普鲁断裂的中小震活动,地震序列呈近NS向长条带状分布; 2012年于田M_S6.2地震序列沿NNE向分布,发震构造为苦牙克断裂; 2014年于田M_S7.3地震序列沿NE和NNE方向展布,其中NE走向的余震序列沿阿尔金断裂走向有3处余震丛集分布,由此推测该余震低活动区是由于断层内存在一较大凹凸体,终止了破裂的传播所致,发震构造为阿什库勒断裂和苦牙克断裂． 此外,地震序列截面特征显示,2011—2014年3次于田M_S≥5.0地震序列基本贯通了阿尔金断裂带西南端的次级断裂和普鲁断裂．      

THE DISCUSSION FOR THE NEW ACTIVITY OF THE TIANQUAN SEGMENT OF LONGMENSHAN FAULT ZONE AND ITS RELATIONSHIP TO THE 1327 TIANQUAN EARTHQUAKE,SICHUAN

The 2008 Wenchuan earthquake occurred along the Longmen Shan fault zone, only five years later, another M7 Lushan earthquake struck the southern segment where its seismic risk has been highly focused by multiple geoscientists since this event. Through geological investigations and paleoseismic trenching, we suggest that the segment along the Shuangshi-Dachuan Fault at south of the seismogenic structure of the Lushan earthquake is active during Holocene. Along the fault, some discontinuous fault trough valleys developed and the fault dislocated the late Quaternary strata as the trench exposed. Based on analysis of historical records of earthquakes, we suggest that the epicenter of the 1327 Tianquan earthquake should be located near Tianquan and associated with the Shuangshi-Dachuan Fault. Furthermore, we compared the ranges of felt earthquakes(the 2013 M7 Lushan earthquake and the 1970 M_S6.2 Dayi earthquake)and suggest that the magnitude of the 1327 Tianquan earthquake is more possible between 6½ and 7. The southern segment of the Longmen Shan fault zone behaves as a thrust fault system consisting of several sub-paralleled faults and its deep structure shows multiple layers of decollement, which might disperse strain accumulation effectively and make the thrust system propagate forward into the foreland basin, creating a new decollement on a gypsum-salt bed. The soft bed is thick and does not facilitate to constrain fault deformation and accumulate strain, which produces a weak surface tectonic expression and seismic activity along the southern segment, this is quite different from that of the middle and northern segments of the Longmen Shan fault zone.     

龙门山南段前缘地区活褶皱-逆断层运动学机制——以芦山地震为例

2013年4月20日发生在龙门山南段的芦山MS7.0地震是继发生在龙门山中北段的汶川MS8.0地震之后的又一次强震。本文通过震后地表变形特征、余震分布、震源机制解、石油地震勘探剖面、历史地震数据等资料,结合前人对龙门山南段主干断裂、褶皱构造特征的研究以及野外实地考察,应用活动褶皱及"褶皱地震"的相关理论,初步分析芦山地震的发震构造模式。认为芦山地震为典型的褶皱地震,发震断裂为前山或山前带一隐伏断裂。构造挤压产生的地壳缩短大部分被褶皱构造吸收。认为龙门山南段前缘地区具有活褶皱-逆断层的运动学特征,表明龙门山逆冲作用正向四川盆地内部扩展。     

Review and new interpretation for the propagation characteristics associated with the 1999 Chi‐Chi earthquake faulting event

The Chi‐Chi earthquake (M_W = 7.6) took place in central western Taiwan in 1999. The earthquake caused reactivation of the Chelungpu Fault and resulted in 100‐km‐long surface ruptures. The fault strikes mostly north–south to NNE–SSW; however, the northern tip of the southern segment of the surface ruptures rotates clockwise to define an east–west trend, then jumps to a shorter NNW‐trending rupture. The largest vertical displacement is recorded in the Shihkang area of the Shihkang–Shangchi Fault Zone, where vertical slips are up to 8–10 m. The Shihkang–Shangchi Fault Zone displays a complex fault pattern as a linkage damage zone between two fault segments with the greatest concentration of faults and fractures. Our new interpretation, based on recent published geometric, kinematic, and geophysical studies on the Chi‐Chi earthquake fault, suggests that the Shihkang–Shangchi Fault Zone is not a simple termination zone, but may be an ‘overstep zone’ or a ‘transfer zone’. Slip analysis along the surface ruptures indicates that they are composed of three fault segments and the amount of slip partly depends on the intersection angle between slip direction and fault strike. Our numerical modeling for the area indicates that Coulomb stress changes are mainly concentrated on tips and bends of the surface ruptures. Slip patterns indicate that the fault propagates toward the northeast. Therefore, this study suggests high potential for future earthquake activity along the unruptured Shangchi segment. Hence, future geohazard studies should focus on the Shangchi segment to evaluate potential earthquakes, determine recurrence intervals, and reduce future earthquake hazards.     

2014年新疆于田MS7.3地震序列重定位及其发震构造初步研究

2014年2月12日在新疆于田县发生了M_S7.3地震,主震前一天在震区发生了M_S5.4前震,震后余震活动频繁,由于震区台站十分稀疏和不均匀、地壳速度结构复杂,台网常规定位结果精度有限,很难从中获得序列的空间分布特征和活动趋势的正确认识.本文首先利用位于震区附近的于田地震台5年记录的远震波形数据,采用接收函数方法研究了震区附近的地壳结构,建立了震源区的地壳速度模型.在此基础上,联合震相到时和方位角对2014年于田M_S7.3地震序列(从2014年02月11日-2014年04月30日,共计577次地震)进行了重新绝对定位.结果显示,(1) 重定位后的前震和主震震中位置明显向地表破裂带及其附近的阿尔金分支断裂(南肖尔库勒断裂和阿什库勒-肖尔库勒断裂)靠近,两者相距5.4 km,主震位置为36.076°N、82.576°E,震源深度为22 km, 前震位置为36.055°N、82.522°E,震源深度为19 km;(2) 本文重定位结果显示,余震序列沿NEE-SWW展布,优势分布长度约73 km、宽度约16 km,平均震源深度为14.8 km,其中77%的余震分布在地表破裂带的西南端,这部分余震中少数沿阿什库勒-肖尔库勒断裂分布,绝大多数沿北东东向的南肖尔库勒断裂分布,位于地表破裂带东北端的余震沿阿什库勒-肖尔库勒断裂分布,但发生在地表破裂带的余震极少;重定位后,位于地表破裂带西南侧的震中分布由台网目录的近南北向变为北东向,与地表破裂带、南肖尔库勒断裂和阿什库勒-肖尔库勒断裂走向一致;(3) 沿重定位剖面的地震分布,可推断位于地表破裂带西南段的南肖尔库勒断裂与位于北东段的阿什库勒-肖尔库勒断裂倾向反向,南肖尔库勒断裂的倾向为SE,阿什库勒-肖尔库勒断裂的倾向为NW,这与本次地震野外考察得到的断裂性质一致.综合重定位结果、地表破裂带分布、震源机制解、南肖尔库勒断裂和阿什库勒-肖尔库勒断裂的性质认为,2014年于田M_S7.3地震的发震构造为阿尔金断裂西南尾段的两条分支断裂——南肖尔库勒断裂和阿什库勒-肖尔库勒断裂.     

STUDY ON SOURCE PARAMETERS OF THE 8 AUGUST 2017 M7.0 JIUZHAIGOU EARTHQUAKE AND ITS AFTERSHOCKS,NORTHERN SICHUAN

On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with M_L≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤M_L≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation.     

SIMULATION OF SEISMIC RISK IN THE DALIANGSHAN SUB-BLOCK AND ADJACENT AREAS USING THE NONLINEAR FRICTION FEM METHOD

Most earthquakes result from fault activity under heterogeneous loading and complex physical properties, also affected by fault structure and interaction between faults. Such a complicated mechanism makes often failures of the "seismic gap" theory in the effort of medium-and long-term earthquake prediction. This study attempts to address this issue using the finite element method(FEM).The friction behavior of faults can be used to simulate the non-uniformity of rupture processes of the seismogenic structure. So we use the FEM containing non-linear friction to simulate fault ruptures in the Daliangshan sub-block and adjacent areas, and compare the results with time-space evolution of historical M_S ≥ 7 earthquakes since 1840 in this region. In the simulation, the sequence of large-batch fault contact nodes change from "stick state" to "slip state" in short time, which mimics the sudden fault slip and the occurrence of major earthquakes. The results show that the fault breaking lengths from simulation are largely consistent with the magnitudes of historical earthquakes in the study area, such as the 1850 Puge-Xichang M_S7.5, and 1887 Shiping M_S7.0 earthquakes. The simulation also shows the development of seismic gaps and "gap breaks" by major earthquakes on the Xianshuihe fault, such as 1955 Kangding M_S7.5 earthquake. Especially, the results illustrated the very long time of the seismogenic process of the 2008 Wenchuan M_S8.0 earthquake, and the corresponding sudden big rupture along the Longmenshan Fault, which is very similar to the observed surface rupture and very long incubation time and sudden co-seismic process. Then, this simulation is further applied to long-term earthquake prediction for the study area by calculation on a much longer time. The simulation results suggest that the Xiaojiang fault and the Zemuhe fault have relatively higher seismic risk, while moderate-sized earthquakes might occur on the Daliangshan fault and the Aninghe fault, and major earthquakes might rupture the northern segment of the Xianshuihe fault in a much longer time.     

USING DEFORMED FLUVIALTERRACES OF THE QINGYIJIANG RIVER TO STUDY THE TECTONIC ACTIVITY OF THE SOUTHERN SEGMENT OF LONGMENSHAN FAULT ZONE

On 20 April 2013, a destructive earthquake, the Lushan M_S7.0 earthquake, occurred in the southern segment of the Longmenshan Fault zone, the eastern margin of the Tibetan plateau in Sichuan, China. This earthquake did not produce surface rupture zone, and its seismogenic structure is not clear. Due to the lack of Quaternary sediment in the southern segment of the Longmenshan fault zone and the fact that fault outcrops are not obvious, there is a shortage of data concerning the tectonic activity of this region. This paper takes the upper reaches of the Qingyijiang River as the research target, which runs through the Yanjing-Wulong Fault, Dachuan-Shuangshi Fault and Lushan Basin, with an attempt to improve the understanding of the tectonic activity of the southern segment of the Longmenshan fault zone and explore the seismogenic structure of Lushan earthquake. In the paper, the important morphological features and tectonic evolution of this area were reviewed. Then, field sites were selected to provide profiles of different parts of the Qingyijiang River terraces, and the longitudinal profile of the terraces of the Qingyijiang River in the south segment of the Longmenshan fault zone was reconstructed based on geological interpretation of high-resolution remote sensing images, continuous differential GPS surveying along the terrace surfaces, geomorphic field evidence, and correlation of the fluvial terraces. The deformed longitudinal profile reveals that the most active tectonics during the late Quaternary in the south segment of the Longmenshan Fault zone are the Yanjing-Wulong Fault and the Longmenshan range front anticline. The vertical thrust rate of the Yanjing-Wulong Fault is nearly 0.6~1.2mm/a in the late Quaternary. The tectonic activity of the Longmenshan range front anticline may be higher than the Yanjing-Wulong Fault. Combined with the relocations of aftershocks and other geophysical data about the Lushan earthquake, we found that the seismogenic structure of the Lushan earthquake is the range front blind thrust and the back thrust fault, and the pop-up structure between the two faults controls the surface deformation of the range front anticline.     

NEW EVIDENCES FOR LATE QUATERNARY ACTIVITY IN THE SOUTHERN SEGMENT OF THE YISHU-TANGTOU FAULT,THE TAN-LU FAULT ZONE,AND ITS TECTONIC IMPLICATION

The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration. Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F₄)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F₃)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F₃)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F₃)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault. Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F₃)can't be ignored.