The effect of interfacial energy anisotropy on planar interface instability in a succinonitrile alloy under a small temperature gradient

The morphological stability of a planar interface with different crystallographic orientations is studied under a small positive temperature gradient using a transparent model alloy of succinonitrile.Novel experimental apparatus is constructed to provide a temperature gradient of about 0.37 K/mm.Under this small temperature gradient,the planar interface instability depends largely on the crystallographic orientation.It is shown experimentally that the effect of interfacial energy anisotropy on planar interface stability cannot be neglected even in a small temperature gradient system.Higher interfacial energy anisotropy leads the planar interface to become more unstable,which is different from the stabilizing effect of the interfacial energy on the planar interface.The experimental results are in agreement with previous theoretical calculations and phase field simulations.     

Can secondary nucleation exist in ice banding of freezing colloidal suspensions?

The formation mechanism of ice banding in the system of freezing colloidal suspensions, which is of significance in frost heaving, ice-templating porous materials and biological materials, is still a mystery. Recently, the theory of secondary nucleation and growth of ice has been proposed to explain the emergence of a new ice lens. However, this theory has not been quantitatively examined. Here, we quantitatively measure the initial interfacial undercooling of a new ice lens and the nucleation undercoolings of suspensions. We find that the interfacial undercooling cannot satisfy the nucleation undercooling of ice and hence disprove the secondary nucleation mechanism for ice banding.     

液相对流对定向凝固胞/枝晶间距的影响

采用类金属透明模型合金丁二腈-1.8 wt%丙酮(SCN-1.8 wt%Ace)合金, 研究了平行于生长界面前沿的液相对流对定向凝固胞/枝晶生长行为及胞/枝晶间距的影响. 对于胞晶生长, 在液相对流作用下, 其尖端将会出现分岔, 使得胞晶间距减小, 并且液相对流流速越大, 胞晶尖端分岔越明显, 胞晶组织越细小, 胞晶间距越小. 至于枝晶生长, 其生长行为与胞晶不同. 当抽拉速度较小时, 液相对流作用下枝晶两侧三次臂的生长速度将会超过枝晶尖端生长速度, 形成新的枝晶列, 使得枝晶一次间距减小, 并且液相对流流速越大枝晶一次间距越小; 当抽拉速度较大时, 液相对流作用下迎流侧二次臂生长发达,且会抑制上游枝晶生长, 使得枝晶一次间距增大, 并且液相对流越强枝晶一次间距越大. 关键词： 定向凝固 胞晶间距 枝晶间距 液相对流     

晶体取向对定向凝固平界面失稳行为的影响

采用丁二腈-丙酮透明模型合金研究了不同晶体取向的晶粒在定向凝固条件下的平界面失稳过程.实验选择了三个界面失稳后具有不同生长形态的典型晶粒作为研究对象, 分别为择优生长枝晶、倾斜枝晶和海藻晶.结果表明可发展为择优生长枝晶的晶粒的平界面失稳孕育时间和初始扰动波长最小,海藻晶次之, 倾斜枝晶最大,这与以往的解析结果和相场模拟结果一致. 同时,实验观察发现可发展为择优生长枝晶和倾斜枝晶的晶粒的界面非稳态演化过程与海藻晶显著不同,这表明平界面失稳的非稳态演化过程与晶体取向相关.     

定向凝固单晶冰的取向确定与选晶

基于六方冰晶偏振光学特性,定义了用于确定冰晶晶体取向的三个参数:光轴倾角α,消光角β和与冰晶基面(0001)面内晶体学择优方向1120与温度梯度的夹角γ,提出了定量判定冰晶晶体取向的理论基础,并在定向凝固平台上采用偏光显微镜成功实现了冰晶晶体取向的精确主动控制,获得了任意取向的单晶冰.本文成功解决了冰晶的定向凝固晶体取向确定和选择的难题,为冰晶生长过程中相关理论问题的研究提供了有效的途径.     

Orientation-dependent morphological stability of grain boundary groove

Crystal orientation influences the morphological stability of solid–liquid interface during directional solidification of alloy, resulting in the variation of solidified microstructure. In this paper, the morphological evolution near grain boundary grooves（GBGs） with different crystal orientations in a dilute succinonitrile alloy under low temperature gradient and interface velocity is observed in situ. Under experimental conditions, the macroscopic solid–liquid interface is planar and keeps stable, while in GBGs there emerge protrusion and undulation. It is found that the morphological stability of GBG is dependent on crystal orientation. Specifically, for succinonitrile with a body-centered cubic crystal structure, GBGs around the 100 crystal orientation keep stable, while those apart from the 100 crystal orientation become unstable under the same conditions. So it is concluded that 100 crystal orientation favors the morphological stability of GBG.     

抽拉速度对SCN-DC共晶生长形貌的影响

本文采用类金属透明模型合金丁二腈-23.6 wt%樟脑 (SCN-23.6 wt%DC) 合金, 研究了棒状共晶定向凝固组织的演化行为, 考察了抽拉速度对棒状共晶合金组织形貌演化的影响规律. 结果表明, 在共晶生长初期, 共晶组织首先起源于晶粒晶界或者试样盒型壁处, 随后沿液/固界面和平行于热流方向生长; 在较小的抽拉速度 (0.064–0.44 μm/s)下, 棒状共晶界面前沿呈现平界面形态, 内部两相棒状组织平行生长, 并且随着抽拉速度的增大,棒状共晶逐渐细化, 棒状间距减小; 而在较大的抽拉速度 (0.67–1.56 μm/s)下, 共晶界面前沿呈现胞状生长形貌, 胞内的棒状共晶呈放射状生长, 同样, 随着抽拉速度的增大, 胞内棒状共晶逐渐细化, 棒状间距减小. 关键词： 定向凝固 共晶形貌 抽拉速度 共晶间距     

晶体取向对定向凝固枝晶生长的影响

采用类金属透明模型合金丁二腈-1.0 wt%乙醇(SCN-1.0 wt% Eth)合金, 考察了晶体取向对定向凝固过程中晶粒的平界面失稳孕育时间、枝晶形态演化以及枝晶一次间距的影响. 结果表明, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 晶粒的平界面失稳孕育时间增加, 界面的稳定性增强; 对于不同晶体取向的枝晶形态演化, 枝晶择优生长方向与温度梯度方向夹角越大, 枝晶二次臂不对称生长越严重, 同时, 具有生长优势的枝晶二次臂对相邻枝晶的生长的抑制越强烈; 至于不同晶体取向的枝晶一次间距, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 枝晶一次间距增大. 关键词： 定向凝固 平界面失稳 枝晶间距 晶体取向     

Strengthening Porous PVA with TiO_2 Structure by an Ice-Templating Method

A poly vinyl alcohol(PVA) scaffold with aligned porous is strengthened by in-situ combining with TiO_2. The increased freezing rate can be used to further increase the strength of aligned porous materials. The strengthened porous PVA exhibits aligned interconnected porous structures and shows a significant enhancement in tensile testing and compression strength testing.     

悬浮液凝固研究进展

悬浮液凝固是将固体颗粒均匀分散于液体中,并对液体进行凝固.它涉及冷冻铸造法多孔材料制备、冻土冻胀、海上浮冰、生物组织冷藏等多个学科和领域.近年来通过悬浮液凝固的方法,人们相继开发出了众多性能优异的新材料,这更为悬浮液凝固的研究注入了新的活力.悬浮液凝固过程中存在众多不同于传统合金凝固的独特现象,如颗粒密堆层、层片晶组织、周期性冰透镜体组织等,但这些凝固微观组织的形成机理尚不清楚.揭示颗粒对悬浮液凝固界面形态演化的影响机理,建立悬浮液体系的凝固理论,不仅帮助人们理解冻土冻胀等自然现象,也为高性能材料的制备与开发提供理论依据.本文首先回顾了悬浮液凝固的研究历史,然后对当前悬浮液凝固微观组织及颗粒动态堆积等方面的研究进展进行述评,并简要介绍本课题组近年来在悬浮液凝固方面的工作进展,最后对悬浮液凝固研究的未来发展进行了展望.