自掺杂La1—δMn1—5O3化合物的晶体结构和巨磁电阻效应

采用溶胶－凝胶工艺制备了Ｌａ１－δＭｎ１－δＯ３化合物，研究了烧结条件的改变对材料的结构、磁性、导电性、磁电阻效应的影响，首次２发现Ｌａ１－δＭｎ１－δＯ３化合物的电阻－温度曲线的双峰现象。     

化学模式识别技术评价中药厚朴质量的研究

本文对不同产地和市售的二十四种厚朴药材及饮片的萃取液进行了高效液相色谱、气相色谱及紫外光谱分析;对所得数据用主成分分析进行分类,概括出不同样品化学成分的异同,认为大叶木兰可做为厚朴的代用品,而在陕西安康购得的样品不应做厚朴使用,后者经生药学鉴定为厚朴伪品凹叶木兰。化学模式识别技术可为寻找药材的代用品、评价中药质量及鉴定伪劣药材提供依据。     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

稳态荧光探针法测定三聚季铵盐表面活性剂的胶束聚集数

以芘为荧光探针, 十六烷基氯化吡啶(CPC)为猝灭剂, 以芘的饱和水溶液为溶剂配制表面活性剂溶液, 根据芘的荧光强度之比I1/I3随表面活性剂水溶液浓度的变化, 测定了三聚季铵盐表面活性剂CTTTA的cmc值, 测定值与表面张力法测定的cmc值一致；当猝灭剂CPC的浓度取0.1~0.3 mmol·L-1范围时, 用稳态荧光探针法测定了CTTTA的胶束聚集数. 实验数据表明, 表面活性剂溶液浓度为6~10倍cmc时, 胶束聚集数N随表面活性剂浓度增大而线性增大, 并用外推法得到CTTTA的临界胶束聚集数.     

漂浮气泡形状的研究

用最小势能原理证明液面上漂浮的足够大气泡呈半球状.     

α-苯偶姻肟的绿色合成及其顺、反异构体的选择性控制与分离

报道了一种α-苯偶姻肟的合成及其顺、反异构体的分离方法.以苯甲醛为原料,双正离子咪唑盐为催化剂,通过氮杂卡宾机理合成了中间体α-苯偶姻,该方法条件温和,成本较低,环境友好,收率较高.在α-苯偶姻肟化生成α-苯偶姻肟的反应中,通过调节反应温度,得到了互为顺、反异构体的两种初产物,并采用梯度淋洗的柱层析法将两种异构体完全分离.     

构建核壳结构增强Ho~(3+)离子在镥基纳米晶中的红光上转换发射

本文主要以具有六方相结构的NaLuF_4:Yb~(3+)/Ho~(3+)/Ce~(3+)纳米晶体为核,采用外延生长法构建具有同质结构的NaLuF_4:Yb~(3+)/Ho~(3+)/Ce~(3+)@NaLuF_4:Yb~(3+)核壳纳米晶体.借助X-射线衍射仪及透射电子显微镜对样品的晶体结构、形貌及尺寸进行表征.在近红外光980nm激光激发下,通过构建核壳结构及有效调控外壳中敏化离子Yb~(3+)离子的掺杂浓度,实现Ho~(3+)离子在NaLuF_4纳米晶体中的红光发射增强.实验结果表明:在相同的激发条件下,具有核壳结构的NaLuF_4:Yb~(3+)/Ho~(3+)/Ce~(3+)@NaLuF_4:Yb~(3+)纳米晶体的红光发射均得到了增强,同时,当外壳中Yb~(3+)离子的掺杂浓度为10.0%时,其上转换红光发射强度最强,为NaLuF_4:Yb~(3+)/Ho~(3+)/Ce~(3+)晶体核红光发射强度的5.8倍.根据其光谱特性及发光动力学过程,讨论了同质壳及壳中敏化离子掺杂浓度变化对其发光特性的影响规律.这种具有较强红光发射的核壳结构纳米晶体在生物医学、防伪编码、多色显示等领域具有较大的应用前景.     

Quantum oscillation measurements in high magnetic field and ultra-low temperature

The physical properties of a solid are determined by the electrons near the Fermi energy and their low-lying excitations. Thus, it is crucially important to obtain the band structure near the Fermi energy of a material to understand many novel phenomena that occur, such as high-T_c superconductivity, density waves, and Dirac-type excitations. One important way to determine the Fermi surface topology of a material is from its quantum oscillations in an external magnetic field. In this article, we provide a brief introduction to the substation at the Synergetic Extreme Condition User Facility(SECUF),with a focus on quantum oscillation measurements, including our motivation, the structure of and the challenges in building the substation, and perspectives.