氨丙基硅三烷改性介孔二氧化硅及对痕量镉(Ⅱ)的分离富集性能研究

以氨丙基硅三烷作为改性剂,对介孔二氧化硅表面进行修饰,制备了氨基化介孔二氧化硅吸附材料,采用透射电镜和傅立叶红外光谱仪对其进行表征,并用于水样中痕量镉的富集,建立了氨基化介孔二氧化硅分离预富集/火焰原子吸收光谱法测定痕量镉的方法。考察了溶液pH值、样品流速、洗脱剂类型、干扰离子和吸附容量等对痕量镉分离富集的影响,以及该吸附材料对痕量镉(Ⅱ)的吸附性能。结果表明,溶液pH 7.0,样品流速8 m L/min时镉离子能被制备材料高效吸附,吸附的镉(Ⅱ)用5.0 m L 2 mol/L HNO_3完全洗脱,火焰原子吸收法测定。在最佳实验条件下,方法的线性范围为0.6~20 ng/m L,定量下限为0.5 ng/m L,富集倍数为50倍,对10 ng/m L Cd2+测定的相对标准偏差(n=11)为0.92%,加标回收率为98.8%~104.5%。该方法的抗干扰能力较好,富集柱可循环使用12次以上,可用于环境水样中镉(Ⅱ)的测定。     

介孔TiO2分离富集-火焰原子吸收法测定矿样中痕量Cd(Ⅱ)

研究了介孔Ti O2分离富集材料的制备及其对Cd(Ⅱ)的吸附性能,考察了影响吸附和解吸的主要因素。pH=6.0时,介孔Ti O2能定量吸附溶液中的痕量Cd(Ⅱ),其静态饱和吸附容量为57.8 mg/g。吸附在介孔Ti O2上的Cd(Ⅱ)可用1 mol/L HCl洗脱,洗脱液中的Cd(Ⅱ)用火焰原子吸收法测定。本法对Cd(Ⅱ)的检出限(3σ)为23.3 ng/mL,相对标准偏差(RSD)为2.0%(n=7,c=1.0μg/mL),回收率在94.0%～102.5%之间。该方法用于矿样中痕量Cd(Ⅱ)的测定,结果满意。     

分子印迹壳聚糖/凹土分离富集-火焰原子吸收光谱测定痕量铅

建立了用分子印迹壳聚糖/凹凸棒石（MICA）分离富集-火焰原子吸收光谱（FAAS）测定痕量铅的新方法。 在动态吸附条件下,系统地研究了溶液pH值、流速、洗脱条件和干扰离子对痕量铅分离富集的影响;在pH=4.5,上样流速为0.60 mL/min的条件下,铅能被MICA定量富集;吸附的铅可用1.0 mol/L HCl-0.1 mol/L 甲基异丁酮的乙醇溶液在流速为0.96 mL/min条件下完全洗脱;在优化条件下,MICA对铅的动态吸附容量为36.78 mg/g。 线性范围为0～1.28 mg/L,r=0.999 7,检出限（3σ,n=11）为0.73 μg/L,相对标准偏差为1.69%(n=6,ρ=0.08 mg/L),回收率在98.7%～101.4%之间。 该方法操作简便、线性关系良好、灵敏度和精密度高,应用于实际水样中痕量铅的测定,结果满意。     

介孔Al2O3分离富集-火焰原子吸收法测定麻黄和马钱子中的铅

研究了介孔Al2O3分离富集-火焰原子吸收法测定麻黄和马钱子中的铅的新方法.探讨了溶液pH、吸附温度、洗脱条件及共存离子对铅分离富集的影响.在最佳实验条件下,介孔Al2O3能定量、快速吸附试液中的痕量pb2+,其静态饱和吸附容量为8.53 mg/g.吸附在介孔Al2O3上的pb2可用0.2 mol/LEDTA完全洗脱....     

纳米SiO_2分离富集-火焰原子吸收法测定水中痕量银

研究了纳米SiO_2分离富集-火焰原子吸收法测定水中痕量银的新方法.考察了溶液pH、吸附时间、洗脱条件和干扰离子等因素对Ag~+分离富集的影响,确定了纳米SiO_2对Ag~+吸附的最佳条件.结果表明:在pH 4.1时,纳米SiO_2能定量吸附银,吸附在纳米SiO_2上的Ag~+可用0.5 mol/L HCl+0.5 mol/L硫脲定量洗脱.该法对银的检出限为0.77 ng/mL(3σ,n=11);线性范围为0.005～1.5μg/mL,对0.5μg/mL的Ag~+标液进行7次测定,RSD为3.6%,回收率在94.0%～101.5%之间;方法可用于环境水样中痕量银的测定.     

离子印迹壳聚糖/凹土分离富集-火焰原子吸收光谱测定中药材中痕量Cd(Ⅱ)的研究

建立了离子印迹壳聚糖/凹凸棒石(IICA)分离富集-火焰原子吸收光谱(FAAS)测定中药材中痕量Cd(Ⅱ)的新方法。在动态吸附条件下,系统研究了溶液pH值、流速、洗脱条件和干扰离子对痕量Cd(Ⅱ)分离富集的影响。研究表明,在pH为4.5,上样流速为0.60mL/min条件下,Cd(Ⅱ)能被IICA定量富集;吸附的Cd(Ⅱ)可用1.0mol/L HCl-0.1mol/L甲基异丁酮的乙醇溶液,在流速为0.96mL/min条件下完全洗脱。优化条件下,IICA对Cd(Ⅱ)的动态吸附容量为56.45mg/g。线性范围为0.00097～1.28mg/L,r=0.9994,检出限(3σ,n=11)为0.97μg/L,相对标准偏差为1.32%(n=6,c=0.08mg/L),回收率在96.5%～106.4%之间。该方法操作简便,灵敏度和精密度高,可应用于实际中药材样品中痕量镉的测定。     

改性介孔二氧化硅分离富集-火焰原子吸收光谱法检测痕量镉

利用叠氮化介孔二氧化硅与炔丙胺反应,制备了炔丙胺介孔二氧化硅吸附材料,采用傅立叶红外光谱仪对其进行表征,并用于水样中痕量镉的富集。吸附材料在溶液pH 7.5时,恒温振荡30 min能高效吸附痕量Cd~(2+),吸附的Cd~(2+)用1 m L 1 mol/L HNO_3振荡30 min完全洗脱,火焰原子吸收法测定。在最佳实验条件下,方法的线性范围为0.5~50 ng/m L,方法检出限为0.06 ng/m L(3σ,n=20),富集倍数可达50倍,对20 ng/m L Cd~(2+)测定相对标准偏差为1.9%(n=20),加标回收率为95.5%~97.5%。吸附材料可循环使用25次以上并用于水样中Cd~(2+)的测定。     

中孔分子筛SBA-15-NH2 分离富集火焰原子吸收光谱法测定烟花中痕量钯的研究与应用

建立了中孔分子筛SBA-15-NH2分离富集火焰原子吸收光谱法测定痕量钯的新方法,探讨了中孔分子筛SBA-15-NH2材料吸附钯的原理和最佳条件.在pH 3.0、温度为(15±1) ℃的条件下,钯可被该材料定量吸附,其吸附容量为1.21 mg/g.吸附的钯用饱和硫脲溶液洗脱,并用火焰原子吸收法测定洗脱的钯.该方法测定钯的检出限为0.59 μg/L(3σ,n=11),线性范围为0.002 ～1.2 mg/L,加标回收率为98% ～107%.对0.05 mg/L的Pd2+溶液平行测定7次,RSD为2.24%.方法用于烟花中痕量钯的测定,结果满意.     

印迹壳聚糖/凹土分离富集-FAAS测定水中痕量镉

建立了用离子印迹壳聚糖/凹土(ⅡGA)分离富集-火焰原子吸收光谱(FAAS)测定痕量镉的新方法.在动态吸附条件下,系统地研究了溶液pH值、流速、洗脱条件和干扰离子对痕量镉分离富集的影响;在pH4.5、上样流速为0.60 mL/min的条件下,镉能被ⅡCA定量富集;吸附的镉可用1.0 mol/L HCl-0.1 mol/...     

有机-无机介孔材料分离富集痕量铅及其火焰原子吸收光谱法测定

以正辛胺及γ-巯丙基三乙氧基硅烷在氯化钾溶液中反应,制得一种有机-无机介孔材料,并应用于分离富集痕量铅,试验了溶液pH值、温度、洗脱条件及干扰离子对铅(Ⅱ)分离富集的影响,结果发现该材料对铅(Ⅱ)的吸附具有较高的选择性和较大的吸附容量。在pH 6.0、试验温度为(20±1)℃条件下,铅(Ⅱ)可被该材料定量吸附。其静态饱和吸附容量为26.37 mg·g~(-1)。吸附的铅(Ⅱ)可用0.2 mol·L~(-1)硝酸-0.5 mol·L~(-1)乙酸混合酸溶液洗脱,再用火焰原子吸收光谱法测定。该方法测定铅(Ⅱ)的检出限(3s/k)达到1.5μg·L~(-1),线性范围在0.80 mg·L~(-1)以内。此法应用于环境水样中痕量铅的测定,加标回收率在96.7%～105.0%之间。测定值的相对标准偏差(n=7)在1.66%～2.05%之间。     

键合4-(2-吡啶偶氮)-间苯二酚螯合树脂分离富集-火焰原子吸收法测定蔬菜中痕量镉(Ⅱ)

本文合成了Amberlite XAD-4键合4-(2-吡啶偶氮)-间苯二酚螯合树脂,并考察了其对痕量镉(Ⅱ)的吸附性能。探讨了溶液pH、洗脱剂和干扰离子等对镉(Ⅱ)分离富集的影响。树脂吸附容量为4.7mg/g,吸附的镉(Ⅱ)用5mL 2mol/L HNO3乙醇溶液洗脱,火焰原子吸收法测定。在最佳实验条件下,回收率为94.4%～97.9%,相对标准偏差在1.7%～2.7%之间。方法可用于蔬菜中镉(Ⅱ)的测定。     

Optimization of a new resin, Amberlyst 36, as a solid-phase extractor and determination of copper(II) in drinking water and tea samples by flame atomic absorption spectrometry

A new simple and reliable method has been developed to separate and preconcentrate trace copper ion in drinking water and tea samples for subsequent measurement by flame atomic absorption spectrometry (FAAS). The copper ions are adsorbed quantitatively during passage of aqueous solutions through Amberlyst 36 cation exchange resin. After the separation and preconcentration stage, the analyte was eluted with a potassium cyanide solution and determined by FAAS. Different factors including pH of sample solution, sample volume, amount of resin, flow rate of aqueous solution, volume and concentration of eluent, and matrix effects for preconcentration were examined. The analytical figures of merit for the determination of copper are as follows: analytical detection limit (3 sigma), 0.26 microg/L; precision (RSD), 3.1% for 100 microg/L; enrichment factor, 200 (using 1000 mL of sample solution and 5 mL of eluent); time of analysis, 3.5 h (for obtaining enrichment factor of 200); capacity of resin, 125 mg/g. The method was applied for copper determination by FAAS in tap water, commercial natural spring water, commercial treated drinking water, and commercial tea bag sample. The accuracy of the method is confirmed by analyzing tea leaves (GBW 07605). The results demonstrated good agreement with the certified values.     

有机悬浮固化分散液-液微萃取测定水样中痕量铅

建立了以二乙基二硫代氨基甲酸钠为配位剂,十二醇为萃取剂,乙醇为分散剂的悬浮固化分散液-液微萃取—火焰原子吸收光谱法测定水样中痕量铅的方法。详细探讨了影响萃取效率的因素。优化条件为:二乙基二硫代氨基甲酸钠的用量为10-6 mol,十二醇体积为90.00μL,乙醇体积为1.00 mL,pH为7.00。在最佳条件下,铅的检出限为1.12μg/L,富集倍率为16.00,线性范围5.00～600.00μg/L,对含有20.00μg/L和600.00μg/L Pb的标准溶液平行萃取测定11次,测定结果的RSD分别为3.73%和2.62%。本方法应用于自来水、河水及海水中痕量铅的分析,加标回收率为90.10%～100.70%。     

Preconcentration of lead, cadmium and zinc on silica gel loaded with diethyldithiocarbamate prior to their determination by flame-atomic absorption spectrometry

A silica gel sorbent loaded with sodium diethyldithiocarbamate has been developed for the preconcentration of lead, cadmium and zinc prior to their determination by flameatomic absorption spectrometry (FAAS). The sorption and desorption of the metal ions was studied under both static and dynamic conditions. The metal ions were quantitatively retained on the silica gel sorbent based on an equilibrium time of less than 1 min. In case of the batch method, the effects of pH, shaking time, amount of sorbent, and desorption time were investigated. Among the desorption agents studied, only EDTA in ammonium chloride/ammonia buffer yielded quantitative recoveries. Freundlich's sorption isotherms determined for each metal show that sufficient sorption ability is obtained. The column method allows the preconcentration of metal ions from large sample volumes (e.g. 200 mL) using a flow rate of 5 mL min^–1. The influence of foreign ions present in natural waters and saline solutions was examined. The reproducibility of the total analytical method, expressed as relative standard deviation (RSD) is 1.8, 0.5 and 0.6%, for lead, cadmium and zinc, respectively.     

Preconcentration and determination of trace amounts of lead (II) as thenoyltrifluoroacetone complex with dibenzo-18-crown-6 by synergistic extraction and atomic absorption spectrometry

A new method for the preconcentration and determination of trace amounts of lead at the μg/L level in natural waters has been established based on the formation of the thenoyltrifluoroacetone (TTA) complex with dibenzo-18-crown-6 (DB18C6) by means of synergistic extraction and back-extraction combined with atomic absorption spectrometry (AAS). The effect of various factors (synergism with TTA and DB18C6, shaking time, preconcentration factor, composition of the extracted species, and foreign ions etc.) on the extraction and back-extraction of lead has been investigated in detail. The lead-TTA chelate in o-dichlorobenzene forms a stable adduct with DB18C6 as Pb(TTA)₂ DB18C6. The stability constant (β) of the adduct determined by curve fitting method was log β = 4.2. The amount of lead in natural waters such as tap water (Kanazawa University) and Kakehashi river (Komatsu City) determined by the present method was found to be 0.64 ± 0.02 μg/L and 5.10 ± 0.03 μg/L, respectively.     

环境水样中痕量铅的中孔分子筛Al-MCM-41分离富集-火焰原子吸收法测定

建立了中孔分子筛Al-MCM-41分离富集-火焰原子吸收光谱法测定水样中痕量铅的新方法。采用扫描电镜(SEM)、红外光谱(IR)等检测方法对自制的中孔分子筛Al-MCM-41吸附材料进行了表征,优化了中孔分子筛Al-MCM-41对试液中痕量铅的吸附和解吸条件。在pH5.5时,室温振荡20 min,中孔分子筛Al-MCM-41能定量、快速吸附水中的痕量Pb2+,其静态饱和吸附容量为2.5 mg/g。吸附在中孔分子筛Al-MCM-41上的Pb2+可用0.2 mol/L EDTA完全洗脱。其他金属离子共存不影响铅的测定。洗脱铅后的吸附材料经再生可循环使用10次以上。Pb2+的线性范围为0.5~30 mg/L,富集后方法检出限(3σ)为0.05μg/L,对5 mg/L的Pb2+溶液平行测定11次,相对标准偏差为1.2%,加标回收率为98%~104%。该方法用于环境水样中铅的测定,结果满意。