核/壳结构的ZnS:Mn/SiO_2纳米粒子的制备及发光性质研究

采用溶剂热法制备了Mn离子掺杂的ZnS纳米粒子(ZnS∶Mn),然后利用正硅酸乙酯(TEOS)的水解反应对其进行了不同厚度的SiO2无机壳层包覆。采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及荧光发射光谱(PL)对样品的结构及光学性质进行了表征和研究。包覆SiO2壳层后,粒子的粒径明显增大并且在ZnS∶Mn纳米粒子表面可以观察到明显的SiO2壳层。XPS测试印证了ZnS∶Mn/SiO2的核壳结构。随着SiO2壳层的增厚,ZnS∶Mn/SiO2的Mn离子的发光先增强后减弱,这是因为SiO2壳层同时具有表面修饰和降低发光中心浓度这两种相反的作用。当壳层厚度(壳与核的物质的量的比)达到5时,发光效果达到最好,其强度达到未包覆样品的7.5倍。     

用分散聚合反应制备SiO2/PS包覆粒子（英）

采用分散聚合反应制备了纳米SiO2/PS包覆粒子,并对其结构进行了表征。首先在超声波场中用表面活性剂对纳米SiO2粒子进行亲油化处理,然后在氮气保护下利用超声波的分散、粉碎、活化、引发等多重作用,在实现纳米SiO2粒子在反应介质中纳米分散的同时,引发苯乙烯单体在纳米SiO2粒子表面发生分散聚合反应,制备出纳米SiO2/PS包覆粒子。最后,采用SEM,TEM,FTIR,XPS等测试手段对纳米SiO2/PS包覆粒子进行了表征,测试结果表明,PS实现了对纳米SiO2的包覆,形成了核壳包覆结构。     

纳米ZnS基白光发射材料的制备和表征

利用溶胶．凝胶法,通过直接掺杂Mn^2 获得白光发射且操作工艺简单的纳米ZnS：Mn荧光粉,使用XRD、UV、PL及VT-IR等方法研究了ZnS：Mn纳米微粒的粒径、结构及荧光特性。结果表明：ZnS：Mn纳米微粒的平均粒径约为7nm,为闪锌矿晶体结构;所制备样品的荧光发射光谱有强度相当的两个峰,一个是峰值位于480nm的基质发光,另一个是峰值位于590nm的橙色光,样品总体发白光;Mn^2 的掺杂量对ZnS：Mn纳米白光荧光粉发光性能的影响很大;在纳米微粒的形成过程中,聚甲基丙烯酸将该纳米粒子包覆。     

核-壳结构的ZnS:Mn纳米粒子的荧光增强

采用反胶束方法制备了ZnS :Mn纳米粒子并对其进行了ZnS壳层修饰 ,采用发射光谱和激发光谱对其光学性质进行了研究。与未包覆的ZnS:Mn纳米粒子相比 ,核 壳结构的ZnS :Mn纳米粒子来自于Mn2 离子的 5 80nm的发光增强了数倍 ,归因于ZnS壳增加了Mn2 离子到纳米颗粒表面的距离 ,减弱了Mn2 离子向表面猝灭中心的传递。样品制备后 ,核 壳结构的ZnS :Mn纳米粒子在 5 80nm的发光随时间略有增强 ,激发光谱的位置未发生明显变化 ,而未包覆的ZnS:Mn纳米粒子在 5 80nm的发光显著增强 ,同时自激活发光减弱 ,激发光谱明显发生红移 ,说明未包覆的ZnS :Mn纳米粒子的尺寸随时间增大 ,而核 壳结构的ZnS :Mn纳米粒子尺寸基本不变。     

不同粒径、超均匀球形金纳米粒子合成及其表面增强拉曼散射效应研究

以氯金酸为原料,抗坏血酸为还原剂,柠檬酸钠为保护剂,用化学还原(种子生长)法制备了不同粒径、超均匀的球形金纳米粒子溶胶,并通过紫外可见吸收光谱(UV-Vis)和扫描电子显微镜(SEM)进行表征。结果表明,随着金纳米粒子粒径的增大,其UV-Vis光谱中的吸收峰发生红移并出现四极峰。为进一步研究金纳米粒子表面增强拉曼散射(SERS)效应的作用机理并优化其灵敏度,我们以罗丹明6G(R6G)为探针分子,对不同粒径的金纳米粒子进行SERS表征,发现R6G的SERS信号随着金纳米粒子的增大先增强后减弱。当金纳米粒子的平均粒径达到120 nm时,产生最强SERS信号增强,增强因子约为1.1×107。三维时域有限差分法(3D-FDTD)理论模拟纳米粒子阵列电磁场分布结果与实验数据的趋势一致。     

SiO2包覆对ZnS纳米材料发光的增强机制

为了明确团聚现象及表面性质对ZnS纳米材料发光性质的影响,采用SiO₂对ZnS材料进行了表面修饰,并对ZnS及ZnS/SiO₂复合材料的光学性质进行对比研究.采用吸收光谱分析了包覆前后光吸收性质的差异,发现SiO₂包覆后ZnS纳米材料的带边由333 nm红移至360 nm.为了研究ZnS纳米材料与ZnS/SiO₂纳米复合材料的光发射性质,分别对含纳米材料的水溶液样品及粉末样品的发光光谱进行了采集.对比研究的结果表明,SiO₂包覆后ZnS纳米材料在蓝紫光区的发光得到了明显增强.以氙灯作为激发光源所获得荧光光谱显示ZnS/SiO₂粉末样品发光的积分强度增大为原来的17.5倍,但相同条件下针对溶液样品的测试结果显示其发光强度只增大了1.1倍,这种增强可用SiO₂的存在抑制了ZnS纳米粒子间的团聚来解释,且这一推断由325 nm紫外激光激发下获得的光致发光数据进行了验证.     

与掺杂浓度相关的ZnS∶Mn纳米粒子的发光性质

采用溶胶法制备了Mn掺杂的ZnS纳米粒子,探讨了掺杂离子浓度对ZnS∶Mn纳米粒子的晶体结构和发光性质的影响。通过X射线衍射（XRD）对样品的结构进行了表征,结果表明：所制备的ZnS∶Mn纳米粒子为立方闪锌矿结构,其在Mn离子的掺杂浓度达到6%时不发生分相,但随着掺杂浓度的增加,纳米粒子的平均粒径会减小。光致发光光谱和荧光光谱的结果表明：通过改变掺杂离子的浓度可实现对ZnS∶Mn纳米粒子590 nm附近荧光发射波长的调节。此外,研究了温度对纳米粒子形貌和发光性质的影响。高分辨透射电子显微镜（HRTEM）观察发现,经过50℃陈化1 h后的ZnS∶Mn样品的平均粒径增大约为20 nm,且加热陈化有利于ZnS∶Mn纳米粒子中Mn2＋在590 nm处产生荧光。     

纳米Ni/SiO2介孔复合体的制备与超顺磁性

采用溶胶－凝胶法制备了Ni^2+的SiO2干凝胶,再通过化学还原得到了纳米Ni/SiO2介孔复合体。从样品的透射电子显微镜观测结果可估算出,介孔复合体中Ni粒子的尺寸约为11－12nm。样品的磁性测量结果表明,与通常的Ni纳米颗粒相比,纳米Ni/SiO2介孔复合体中纳米Ni粒子的粒径在大于理论计算的纳米Ni粒子的临界尺寸时,仍能够保持超顺磁状态。在一定温度范围内,提高还原温度有利于复合体中纳米Ni粒子向超顺磁状态转变。     

聚乙二醇光化学法制备金纳米微粒及共振散射光谱研究

采用共振散射光谱、紫外-可见吸收光谱、透射电镜对聚乙二醇(PEG)-Au3+纳米光化学反应进行了研究。讨论了金纳米粒子合成条件的影响,发现金纳米粒子的尺寸与PEG分子量大小有关。建立了一个利用不同分子量PEG制备一系列粒径为6～60 nm金纳米粒子的光化学合成新方法。根据PEG分子的空间位阻、疏水性等解释了PEG分子量不同而获得不同粒径金纳米粒子的原因。提出了一个合理的纳米光化学反应机理。     

CdS纳米粒子的自组装单分子膜制备研究

利用疏基乙酸与草酸的混合自组装单分子膜成功制备了粒径分布均匀的CdS纳米粒子，并用SEM，XRD，XPS，PL对样品进行了表征。SEM表明形成在自组装单分子膜表面上的CdS纳米粒子的平均粒径约为45nm。XPS表明在自组装单分子膜表面形成了CdS纳米粒子。PL谱表明CdS纳米粒子在675nm有一峰值波长，我们认为这一发光是由表面缺陷造成的。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.