具有超顺磁和可见/近红外发光性质的双功能介孔磁/光纳米复合材料

合成了两种双功能介孔磁/光纳米复合材料。磁性Fe3O4纳米粒子作为核被包覆于介孔二氧化硅纳米球中,稀土铽和铒配合物分别通过硅烷化的配体PABA-Si和phen-Si共价嫁接于介孔球的网络中。研究了所制备的双功能纳米复合材料的结构、磁性、荧光发射性质,结果表明,双功能纳米复合材料具有介孔结构、超顺磁特性和相应稀土配合物的特征荧光发射性质。     

Co-SiO2颗粒膜中颗粒相互作用的温度和尺寸依赖关系

我们在真空离子束溅射设备中制备了Co-SiO2颗粒膜，其结构和磁性分别利用透射电子显微术（TEM）和铁磁共振（FMR）来研究。TEM分析表明Co纳米颗粒相互独立地分布在SiO2介质中，且尺寸分布非常窄。室温转角FMR实验显示薄膜具有单轴各向异性，变温FMR实验被用来研究在100－300K温度范围内的颗粒间相互作用强度随温度变化的关系（我们利用一理论模型计算了颗粒集合体中的铁磁部分所占比例和超顺磁部分所占比例）。我们发现颗粒间相互作用强度除了与温度有关之外，还与Co颗粒的尺寸直接相关。     

Fe3O4@SiO2@TiO2复合纳米结构的尺寸与磁性调控

采用共沉淀法和溶剂热法制备了不同尺寸的Fe3O4纳米粒子,通过Stöber法和溶胶-凝胶法在Fe3O4磁核上包覆SiO2和TiO2壳层获得不同尺寸的Fe3O4@SiO2@TiO2复合纳米结构．采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和振动样品磁强计(VSM)等对其结构、形貌和磁性进行了研究．结果表明,大尺寸复合纳米粒子包覆均匀,分散性好,饱和磁化强度较大,有利于TiO2光催化剂的磁回收与再利用．     

Ni_2P/介孔分子筛催化剂的原位漫反射红外光谱研究

以介孔分子筛MCM-41,MCM-48,SBA-15,SBA-16为载体,硝酸镍为镍源,磷酸氢二铵为磷源,通过浸渍法制备了含有磷化镍前体的介孔分子筛样品,然后在氢气气氛中进行程序升温还原,得到了磷化镍/介孔分子筛催化剂.采用原位漫反射红外光谱法,用CO作为探针分子,对样品的吸附特征进行了研究.结果表明,在介孔分子筛表面CO存在着较弱的物理吸附.在Ni2P/MCM-41催化剂样品表面有四种CO的吸附态:(1)在2055cm-1处形成的Ni(CO)4物种的吸附,(2)在2 091cm-1处的配位不饱和Niδ(0<δ<1)物种上的吸附,(3)在2 127 cm-1处的Ni+物种上的吸附,(4)在2 198～2 202 cm-1范围内的P物种上的吸附.在Ni2P/MCM-48,Ni2P/SBA-15,Ni2P/SBAZ-16催化剂样品表面有二种CO的吸附态:在2 051～2 055cm-1处的Ni(CO)4吸附和在2 093～2 096 cm-1处的配位不饱和Niδ+(0<δ<1)物种上的吸附.     

ZnO/MCM-41复合材料的制备及其光谱性质

以硅酸钠(NaSiO3·9H2O)为硅源,三甲基十六烷基溴化铵(CTAB)为模板剂在碱性条件下水热合成介孔分子筛MCM-41,然后以其为主体,采用锌盐浸渍-灼烧的方法.在介孔分子筛MCM-41上负载了氧化锌(ZnO)纳米微粒,并通过扫描电子显微镜,红外光谱(1R).紫外可见吸收光谱(UV-Vis),N2-吸附脱附和荧光光谱等手段对产品进行了系列表征.结果表明,分子筛平均直径约为1.7μm,对不同温度下灼烧后得到的ZnO/MCM-41组装体的光谱性质进行研究表明介孔分子筛MCM-41的尺寸所限,制备出的ZnO粒子粒径小于2 nm.量子尺寸效应使得ZnO/MCM-41组装体中的ZnO纳米粒子的紫外可见吸收光谱及荧光光谱均发生蓝移.通过红外光谱分析得知ZnO负载到MCM-41上并没有改变介孔分子筛原有的骨架结构.     

钙钛矿La0.8Ca0.2MnO3多晶样品的制备及低温磁学特性

我们利用固相反应法制备了粉末状La0.8Ca0.2MnO3样品,其空间群为pnma,样品中存在超顺磁性粒子,其截止态和超顺磁态的转变温度为185K,从dσ/dT的负峰得到铁磁-顺磁相变居里温度为210K,在顺磁领域线性拟合而得到顺磁居里温度为216.4K,分子式有效磁矩为6.25μB,低温领域磁化曲线服从布洛赫T32定律,其自旋波劲度系数为49.2meV2.     

“瓶中造船”法合成银/空心介孔SO2蛋黄壳纳米结构

通过一种简单有效的“瓶中造船”的方法成功合成了银/空心介孔二氧化硅的蛋黄-蛋壳结构的纳米反应器,通过透射电镜证实这种结构的银/空心介孔SO2结构在SO2介孔空腔内含有一个银纳米颗粒,颗粒的平均尺寸约为43 nm,介空SO2空心球的平均壁厚约为14 nm. 通过ICP表征证实这种反向合成的方法得到银的质量比高达10.29%. 这种结构相比于裸露的银纳米颗粒在硼氢化钠做还原剂催化还原4-硝基苯酚到4-氨基苯酚的时候表现出了良好的催化性能.     

用分散聚合反应制备SiO2/PS包覆粒子（英）

采用分散聚合反应制备了纳米SiO2/PS包覆粒子,并对其结构进行了表征。首先在超声波场中用表面活性剂对纳米SiO2粒子进行亲油化处理,然后在氮气保护下利用超声波的分散、粉碎、活化、引发等多重作用,在实现纳米SiO2粒子在反应介质中纳米分散的同时,引发苯乙烯单体在纳米SiO2粒子表面发生分散聚合反应,制备出纳米SiO2/PS包覆粒子。最后,采用SEM,TEM,FTIR,XPS等测试手段对纳米SiO2/PS包覆粒子进行了表征,测试结果表明,PS实现了对纳米SiO2的包覆,形成了核壳包覆结构。     

量子点荧光免疫和磁弛豫时间传感检测沙门氏菌的研究

基于量子点和超顺磁纳米颗粒分别构建了沙门氏菌的荧光免疫和磁驰豫时间(magnetic resonance switch,MRS)免疫传感的分析方法,并应用于水样中沙门氏菌的检测。在荧光免疫分析方法中,利用偶联有沙门氏菌捕获抗体的磁探针对样品中沙门氏菌进行富集,然后加入偶联有沙门氏菌检测抗体的量子点荧光探针,基于双抗夹心的模式对水样中沙门氏菌的含量进行了测定。量子点的荧光强度和样品中沙门氏菌的浓度呈正相关,检出限是102 cfu·mL-1,检测时间为2h。在MRS免疫反应过程中,偶联有沙门氏菌捕获抗体的超顺纳米磁珠会特异性地结合沙门氏菌,导致超顺纳米磁珠由原来的分散状态转变为聚集状态,从而引起其相邻水分子的质子横向弛豫时间(spin-spin relaxation time,T2)的改变,通过测定T2的改变量ΔT2实现水样中沙门氏菌的检测。结果表明MRS传感器检测沙门氏菌的检测限是103 cfu·mL-1,检测时间是0.5h。比较了这两种方法在检测沙门氏菌方面的优劣及应用潜力。     

磁载光催化剂ZnO/ SiO2/γ-Fe2O3的光催化性能

本文采用液相沉积法制备出了纳米SiO2/γ-Fe2O3复合粒子,在其表面负载ZnO, 从而得到了易于磁性固液分离的磁载光催化剂ZnO/SiO2/γ-Fe2O3, 并通过XRD和TEM等测试技术对样品进行了表征。以可溶性染料亚甲基兰等为降解对象, 研究了磁载光催化剂ZnO/SiO2/γ-Fe2O3在紫外光下的光催化活性。结果表明, 在γ-Fe2O3和ZnO之间包覆一层无定形SiO2可使催化剂降佳率由20.76%提高到95.63%,并且该磁载光催化剂对染料有较好的降解效果, 在三次循环使用后仍能保持较好的光催化性能.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.