Boosting Photocatalytic Hydrogen Production of a Metal–Organic Framework Decorated with Platinum Nanoparticles: The Platinum Location Matters

Improving the efficiency of electron–hole separation and charge‐carrier utilization plays a central role in photocatalysis. Herein, Pt nanoparticles of ca. 3 nm are incorporated inside or supported on a representative metal–organic framework (MOF), UiO‐66‐NH₂, denoted as Pt@UiO‐66‐NH₂ and Pt/UiO‐66‐NH₂, respectively, for photocatalytic hydrogen production via water splitting. Compared with the pristine MOF, both Pt‐decorated MOF nanocomposites exhibit significantly improved yet distinctly different hydrogen‐production activities, highlighting that the photocatalytic efficiency strongly correlates with the Pt location relative to the MOF. The Pt@UiO‐66‐NH₂ greatly shortens the electron‐transport distance, which favors the electron–hole separation and thereby yields much higher efficiency than Pt/UiO‐66‐NH₂. The involved mechanism has been further unveiled by means of ultrafast transient absorption and photoluminescence spectroscopy.     

Boosting the Catalytic Performance of Metal–Organic Frameworks for Steroid Transformations by Confinement within a Mesoporous Scaffold

Solid‐state crystallization achieves selective confinement of metal–organic framework (MOF) nanocrystals within mesoporous materials, thereby rendering active sites more accessible compared to the bulk‐MOF and enhancing the chemical and mechanical stability of MOF nanocrystals. (Zr)UiO‐66(NH₂)/SiO₂ hybrid materials were tested as efficient and reusable heterogeneous catalysts for the synthesis of steroid derivatives, outperforming the bulk (Zr)UiO‐66(NH₂) MOF. A clear correlation between the catalytic activity of the dispersed Zr sites present in the confined MOF, and the loading of the mesoporous SiO₂, is demonstrated for steroid transformations.     

The First Study on the Reactivity of Water Vapor in Metal–Organic Frameworks with Platinum Nanocrystals

We first studied the reactivity of H₂O vapor in metal–organic frameworks (MOFs) with Pt nanocrystals (NCs) through the water–gas shift (WGS) reaction. A water‐stable MOF, UiO‐66, serves as a highly effective support material for the WGS reaction compared with ZrO₂. The origin of the high catalytic performance was investigated using in situ IR spectroscopy. In addition, from a comparison of the catalytic activities of Pt on UiO‐66, where Pt NCs are located on the surface of UiO‐66 and Pt@UiO‐66, where Pt NCs are coated with UiO‐66, we found that the competitive effects of H₂O condensation and diffusion in the UiO‐66 play important roles in the catalytic activity of Pt NCs. A thinner UiO‐66 coating further enhanced the WGS reaction activity of Pt NCs by minimizing the negative effect of slow H₂O diffusion in UiO‐66.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Switching on the Photocatalysis of Metal–Organic Frameworks by Engineering Structural Defects

Defect engineering is a versatile approach to modulate band and electronic structures as well as materials performance. Herein, metal–organic frameworks (MOFs) featuring controlled structural defects, namely UiO‐66‐NH₂‐X (X represents the molar equivalents of the modulator, acetic acid, with respect to the linker in synthesis), were synthesized to systematically investigate the effect of structural defects on photocatalytic properties. Remarkably, structural defects in MOFs are able to switch on the photocatalysis. The photocatalytic H₂ production rate presents a volcano‐type trend with increasing structural defects, where Pt@UiO‐66‐NH₂‐100 exhibits the highest activity. Ultrafast transient absorption spectroscopy unveils that UiO‐66‐NH₂‐100 with moderate structural defects possesses the fastest relaxation kinetics and the highest charge separation efficiency, while excessive defects retard the relaxation and reduce charge separation efficiency.     

Ultra‐Fast Degradation of Chemical Warfare Agents Using MOF–Nanofiber Kebabs

The threat associated with chemical warfare agents (CWAs) motivates the development of new materials to provide enhanced protection with a reduced burden. Metal–organic frame‐works (MOFs) have recently been shown as highly effective catalysts for detoxifying CWAs, but challenges still remain for integrating MOFs into functional filter media and/or protective garments. Herein, we report a series of MOF–nanofiber kebab structures for fast degradation of CWAs. We found TiO₂ coatings deposited via atomic layer deposition (ALD) onto polyamide‐6 nanofibers enable the formation of conformal Zr‐based MOF thin films including UiO‐66, UiO‐66‐NH₂, and UiO‐67. Cross‐sectional TEM images show that these MOF crystals nucleate and grow directly on and around the nanofibers, with strong attachment to the substrates. These MOF‐functionalized nanofibers exhibit excellent reactivity for detoxifying CWAs. The half‐lives of a CWA simulant compound and nerve agent soman (GD) are as short as 7.3 min and 2.3 min, respectively. These results therefore provide the earliest report of MOF–nanofiber textile composites capable of ultra‐fast degradation of CWAs.     

Metal–Organic Gel Material Based on UiO‐66‐NH2 Nanoparticles for Improved Adsorption and Conversion of Carbon Dioxide

Metal–organic frameworks (MOFs) including the UiO‐66 series show potential application in the adsorption and conversion of CO₂. Herein, we report the first tetravalent metal‐based metal–organic gels constructed from Zr^IV and 2‐aminoterephthalic acid (H₂BDC‐NH₂). The ZrBDC‐NH₂ gel materials are based on UiO‐66‐NH₂ nanoparticles and were easily prepared under mild conditions (80 °C for 4.5 h). The ZrBDC‐NH₂‐1:1‐0.2 gel material has a high surface area (up to 1040 m² g^?1) and showed outstanding performance in CO₂ adsorption (by using the dried material) and conversion (by using the wet gel) arising from the combined advantages of the gel and the UiO‐66‐NH₂ MOF. The ZrBDC‐NH₂‐1:1‐0.2 dried material showed 38 % higher capture capacity for CO₂ at 298 K than microcrystalline UiO‐66‐NH₂. It showed high ideal adsorbed solution theory selectivity (71.6 at 298 K) for a CO₂/N₂ gas mixture (molar ratio 15:85). Furthermore, the ZrBDC‐NH₂‐1:1‐0.2 gel showed activity as a heterogeneous catalyst in the chemical fixation of CO₂ and an excellent catalytic performance was achieved for the cycloaddition of atmospheric pressure of CO₂ to epoxides at 373 K. In addition, the gel catalyst could be reused over multiple cycles with no considerable loss of catalytic activity.     

Extraordinary NO2 Removal by the Metal–Organic Framework UiO‐66‐NH2

Here we discuss the removal of nitrogen dioxide, an important toxic industrial chemical and pollutant, from air using the MOF UiO‐66‐NH₂. The amine group is found to substantially aid in the removal, resulting in unprecedented removal capacities upwards of 1.4 g of NO₂ /g of MOF. Furthermore, whereas NO₂ typically generates substantial quantities of NO on sorbents, the amount generated by UiO‐66‐NH₂ is significantly reduced. Of particular significance is the formation of a diazonium ion on the aromatic ring of the MOF, and the potential reduction of NO₂ to molecular nitrogen.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

Hierarchical Pore Development by Plasma Etching of Zr‐Based Metal–Organic Frameworks

The typically stable Zr‐based metal–organic frameworks (MOFs) UiO‐66 and UiO‐66‐NH₂ were treated with tetrafluoromethane (CF₄) and hexafluoroethane (C₂F₆) plasmas. Through interactions between fluoride radicals from the perfluoroalkane plasma and the zirconium–oxygen bonds of the MOF, the resulting materials showed the development of mesoporosity, creating a hierarchical pore structure. It is anticipated that this strategy can be used as a post‐synthetic technique for developing hierarchical networks in a variety of MOFs.     

Thermodynamics of the oxygen evolution electrocatalysis in a functionalized UiO‐66 metal‐organic frameworks

A density functional theory (DFT) approach was used to predict the thermodynamic energy barriers of the oxygen evolution reaction (OER) for three functionalized Metal‐organic Frameworks (MOFs). A UiO‐66(Zr) MOF design was selected for this study that incorporates three linker designs, a 1,4‐benzenedicarboxylate (BDC), BDC functionalized with an amino group (BDC + NH₂), and BDC functionalized with nitro group (BDC + NO₂). The study found several key differences between homogeneous planar catalyst thermodynamics and MOF‐based thermodynamics, the most significant being the non‐unique or heterogeneity of reaction sites. Additionally, the functionalization of the MOF was found to significantly influence the hydroperoxyl binding energy, which proves to be the largest hurdle for both oxide and MOF‐based catalyst. Both of these findings provide evidence that many of the limitations precluding planar homogeneous catalysts can be surpassed with a MOF‐based catalyst. The BDC + NH₂ proved to be the best performing catalyst with a predicted over‐potential for spontaneous OER evolution to be 3.03eV. © 2016 Wiley Periodicals, Inc.     

Water Stable Zr–Benzenedicarboxylate Metal–Organic Frameworks as Photocatalysts for Hydrogen Generation

The Zr‐containing metal–organic frameworks (MOFs) formed by terephthalate (UiO‐66) and 2‐aminoterephthalate ligands [UiO‐66(NH₂)] are two notably water‐resistant MOFs that exhibit photocatalytic activity for hydrogen generation in methanol or water/methanol upon irradiation at wavelength longer than 300 nm. The apparent quantum yield for H₂ generation using monochromatic light at 370 nm in water/methanol 3:1 was of 3.5 % for UiO‐66(NH₂). Laser‐flash photolysis has allowed detecting for UiO‐66 and UiO‐66(NH₂) the photochemical generation of a long lived charge separated state whose decay is not complete 300 μs after the laser flash. Our finding and particularly the influence of the amino group producing a bathochromic shift in the optical spectrum without altering the photochemistry shows promises for the development of more efficient MOFs for water splitting.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Molybdenum (VI)‐functionalized UiO‐66 provides an efficient heterogeneous nanocatalyst in oxidation reactions

A novel heterogeneous nanocatalyst was established by supporting molybdenum (VI) on Zr₆ nodes in the structure of the well‐known UiO‐66 metal–organic framework (MOF). The structure of the UiO‐66 before and after Mo (VI) immobilization was confirmed with XRD, DR‐FTIR and UV–vis spectroscopy, and the presence and amount of Mo (VI) was identified by X‐ray photoelectron spectroscopy and inductively coupled plasma atomic emission spectroscopy. TEM imaging confirmed the absence of Mo clusters on the MOF surface, while SEM confirmed that the appearance of the MOF has not changed upon immobilizing the Mo (VI) catalyst. BET adsorption measurements were used to confirm the porosity of the catalyst. The catalytic activity of this heterogeneous catalyst was investigated in oxidation of sulfides with H₂O₂ in acetonitrile and oxidative desulfurization of dibenzothiophene. Easy work up, convenient and steady reuse and high activity and selectivity are prominent properties of this new hybrid material.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Highly Sensitive and Selective Detection of Pb(II) by NH2−SiO2/Ru(bpy)32+−UiO66 based Solid‐state ECL Sensor

In this study, a novel electrochemiluminescence (ECL) sensor for highly sensitive and selective detection of Pb(II) was developed based on Ru(bpy)₃²⁺ encapsulated UiO66 metal‐organic‐framework (Ru(bpy)₃²⁺?UiO66 MOF) and ?NH₂ group functionalized silica (NH₂?SiO₂). The NH₂?SiO₂ with large surface area provided an excellent platform for the ECL sensor. As numerous exposed carboxyl groups were present on UiO66 backbone, the Ru(bpy)₃²⁺?UiO66 could be steadily immobilized to NH₂?SiO₂ by forming amide bonds. Meanwhile, the introduced UiO66 MOF which used for the encapsulation of Ru(bpy)₃²⁺, significantly enhanced the ECL efficiency of the proposed sensor, as it possessed a large specific surface area and porosity for the loading of Ru(bpy)₃²⁺. Moreover, a high quenching effect on ECL intensity was obtained in the presence of Pb(II) in the electrolyte. Under the optimal conditions, the quenched ECL intensity showed a good linear relationship within Pb(II) concentration in the range from 1.0×10^?6 to 1.0×10² μM, with a detection limit of 1.0×10^?7 μM (S/N=3). The proposed sensor for Pb(II) detection was simple in operation, rapid in testing, stable in signal, and showed a good anti‐interference ability to some other metal ions. Besides, its application for detecting Pb(II) in a real sample was also investigated here. This work provides a potential platform for metal ions detection in environmental monitoring field.     

Nylon–MOF Composites through Postsynthetic Polymerization

Hybridization of metal–organic frameworks (MOFs) and polymers into composites yields materials that display the exceptional properties of MOFs with the robustness of polymers. However, the realization of MOF–polymer composites requires efficient dispersion and interactions of MOF particles with polymer matrices, which remains a significant challenge. Herein, we report a simple, scalable, bench‐top approach to covalently tethered nylon–MOF polymer composite materials through an interfacial polymerization technique. The copolymerization of a modified UiO‐66‐NH₂ MOF with a growing polyamide fiber (PA‐66) during an interfacial polymerization gave hybrid materials with up to around 29 weight percent MOF. The covalent hybrid material demonstrated nearly an order of magnitude higher catalytic activity for the breakdown of a chemical warfare simulant (dimethyl‐4‐nitrophenyl phosphate, DMNP) compared to MOFs that are non‐covalently, physically entrapped in nylon, thus highlighting the importance of MOF–polymer hybridization.     

Preparation and evaluation of open‐tubular capillary column combining a metal–organic framework and a brush‐shaped polymer for liquid chromatography

In this work, an open‐tubular capillary liquid‐phase column was prepared by modifying chain polymer on the inner surface of capillary and chemical bonding of metal organic frameworks, NH₂‐UiO‐66, to the brushes of chain polymer (poly(glycidyl methacrylate)). Besides advantages of facial preparation and good permeability, the chain polymer effectively increases the modification amount of NH₂‐UiO‐66 nanoparticles to increase the phase ratio of open‐tubular capillary column and enhance the interactions with analytes. The results of scanning electron microscope energy‐dispersive X‐ray spectra indicated that NH₂‐UiO‐66 nanoparticles were successfully bonded to the chain polymer. Because of the hydrophobic interaction and hydrogen bonding interaction between the analytes and the ligand of NH₂‐UiO‐66, different analytes were well separated on the NH₂‐UiO‐66‐modified poly(glycidyl methacrylate) capillary (1.12 m × 25 μm id × 365 μm od) with the high absolute column efficiency reaching 121 477 plates, benefiting from an open‐tubular column and low mass transfer resistance provided by polymer brush and metal–organic framework crystal. The relative standard deviations of the retention time for run‐to‐run, day‐to‐day, and column‐to‐column (n = 3) runs are below 4.28%, exhibiting good repeatability. Finally, the column was successfully applied to separation of flavonoids in licorice.     

Evaluation of UiO‐66 metal organic framework as an effective sorbent for Curcumin's overdose

Metal organic frameworks (MOFs) UiO‐66 (UiO stands for University of Oslo) and NH₂‐UiO‐66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X‐ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), and N₂ adsorption–desorption measurements. FESEM showed NH₂‐UiO‐66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios in the feed were investigated in the present study, and this investigation revealed that when the CUR/MOFs with mass ratio was around 0.4, the absorption capacity of NH₂‐UiO‐66 had tended to maximum. Although, functionalization reduced the specific surface area and free volume, introducing polar amine groups could improve the affinity of NH₂‐UiO‐66 respect to CUR. Kinetic studies showed that the kinetic data are well fitted with the pseudo‐ second‐order model. MTT assay revealed that MOFs at the concentration range of 0–560 μg/ml had no cytotoxic effect on the Human Foreskin Fibroblast normal cell line (HFF‐2). These results suggest that these MOFs could be safe as sorbent for adsorb CUR from the body.