Suppressed Lattice Disorder for Large Emission Enhancement and Structural Robustness in Hybrid Lead Iodide Perovskite Discovered by High-Pressure Isotope Effect

The soft nature of organic–inorganic halide perovskites renders their lattice particularly tunable to external stimuli such as pressure, undoubtedly offering an effective way to modify their structure for extraordinary optoelectronic properties. Here, using the methylammonium lead iodide as a representative exploratory platform, it is observed that the pressure-driven lattice disorder can be significantly suppressed via hydrogen isotope effect, which is crucial for better optical and mechanical properties previously unattainable. By a comprehensive in situ neutron/synchrotron-based analysis and optical characterizations, a remarkable photoluminescence (PL) enhancement by threefold is convinced in deuterated CD₃ND₃PbI₃, which also shows much greater structural robustness with retainable PL after high peak-pressure compression–decompression cycle. With the first-principles calculations, an atomic level understanding of the strong correlation among the organic sublattice and lead iodide octahedral framework and structural photonics is proposed, where the less dynamic CD₃ND₃⁺ cations are vital to maintain the long-range crystalline order through steric and Coulombic interactions. These results also show that CD₃ND₃PbI₃-based solar cell has comparable photovoltaic performance as CH₃NH₃PbI₃-based device but exhibits considerably slower degradation behavior, thus representing a paradigm by suggesting isotope-functionalized perovskite materials for better materials-by-design and more stable photovoltaic application.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Rapid Reconstitution of Biosynthetic Machinery for Fungal Metabolites in Aspergillus oryzae: Total Biosynthesis of Aflatrem

Reconstitution of the biosynthetic machinery for fungal secondary metabolites in Aspergillus oryzae provides an opportunity both for stepwise determination of the biosynthetic pathways and the total biosynthesis of fungal natural products. However, to maximize the utility of the reconstitution system, a simple and rapid strategy for the introduction of heterologous genes into A. oryzae is required. In this study, we demonstrated an effective method for introducing multiple genes involved in the biosynthesis of fungal metabolites by using the expression vectors pUARA2 and pUSA2, each of which contains two cloning sites. The successful introduction of all the aflatrem biosynthetic genes (seven genes in total) after two rounds of transformation enabled the total biosynthesis of aflatrem. This rapid reconstitution strategy will facilitate the functional analysis of the biosynthetic machinery of fungal metabolites.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

The evaluation of the emotion by near-infrared spectroscopy

Our purpose is to develop the technology for evaluating emotion objectively from the oxygenated hemoglobin within a brain. Nowadays, Japan is an aging society. The elderly people who need care will increase from now on increasingly. In the case of the person requiring the care who lost the function to convey an intention especially, the objective judgment to a physical and mental pain is required. Persons requiring care will also increase in number with the increase in this population. We gave subject stimulus of a comfortable or an uncomfortable sound and measured concentration of the oxygenated hemoglobin of a frontal lobe part by near-infrared spectroscopy. Based on the experimental result, a comfortable state or an uncomfortable state was distinguished by concentration of the oxygenated hemoglobin using the bayesian network. As a result, we were able to estimate the subject’s psychological condition.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Controller design of desktop-size NC machine tool with multi-application function

In this paper, a desktop-size NC machine tool is first presented to have multi-application function, such as 3D-machining modes with and without handling a machining force, and profiling-control modes with and without using stick-slip motion. The NC machine tool consists of three single-axis devices with a high resolution of 1???m in position. A ball end mill called router bit or a thin wood-stick tool can be attached to the tip of the z-axis. The proposed machine tool realizes compliant motion required for the profiling control along a desired trajectory. The profiling-control mode can be applied to the lapping process of a metallic LED lens cavity. Next, a control strategy with fine stick-slip motion is further added to the profiling-control system to improve the lapping performance. The fine stick-slip motion is generated orthogonally to the direction of the tool movement. Generally, the stick-slip motion is an undesirable phenomenon to be eliminated in precision machineries. However, the proposed machine tool employs the fine stick-slip motion to partly regulate slight finishing energy. The effectiveness of the machine tool is demonstrated through an actual machining test of a wood material and a lapping test of a metallic LED lens cavity.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.