Life time prediction of self-supporting flame-sprayed alumina-rich coatings

Main objective of the presented research is the life time prediction of self-supporting flame-sprayed Al₂O₃- and Al₂O₃ -ZrO₂ -TiO₂-materials under constant load. The characteristic life time and its scatter were derived from stable crack growth tests and Weibull-statistics including the four-point-bending and ball-on-three-balls method. The potential life time was estimated in order to assess room-temperature handling and long term storage of self-supporting flame-sprayed alumina components. In terms of flexural strength, energy release, and subcritical crack growth parameters, distinct differences between both materials were shown. In turn, the characteristic life times only barely deviated from each other. From that the conclusion was drawn that life time performance under constant load application is governed by the characteristic flame-spray microstructure. However, advantages in the flame-spray processing of Al₂O₃ - ZrO₂ -TiO₂ are still given, attributed to its lower melting temperature.     

Sampling of Volatiles in Closed Systems: A Controlled Comparison of Three Solventless Volatile Collection Methods

Journal of Chemical Ecology - Complex inter-organismal communication among plants, insects, and microbes in natural and agricultural ecological systems is typically governed by emitted and...     

Alpha Synuclein only Forms Fibrils In Vitro when Larger than its Critical Size of 70 Monomers

The aggregation of α-synuclein into small soluble aggregates and then fibrils is important in the development and spreading of aggregates through the brain in Parkinson's disease. Fibrillar aggregates can grow by monomer addition and then break into fragments that could spread into neighboring cells. The rate constants for fibril elongation and fragmentation have been measured but it is not known how large an aggregate needs to be before fibril formation is thermodynamically favorable. This critical size is an important parameter controlling at what stage in an aggregation reaction fibrils can form and replicate. We determined this value to be approximately 70 monomers using super-resolution and atomic force microscopy imaging of individual α-synuclein aggregates formed in solution over long time periods. This represents the minimum size for a stable α-synuclein fibril and we hypothesis the formation of aggregates of this size in a cell represents a tipping point at which rapid replication occurs.     

Density of solutions of formaldehyde in water and alcohols

Formaldehyde is an important chemical that is mostly handled in aqueous solutions, which generally also contain methanol; furthermore, also solutions of formaldehyde in other alcohols are used. The density of these solutions is an important thermophysical property. The available models of the density of formaldehyde-containing solutions, however, all have shortcomings, such as a poor accuracy or a limited range of applicability. Therefore, in the present work, a new model of the density in systems of the type (formaldehyde + water + alcohol) was developed. The alcohols that are presently included in the new model are methanol, 1-propanol, and isoprenol; an extension to other alcohols is straightforward. The model was developed using literature data and extensive new density data measured in this work covering binary, ternary, and quarternary solutions of formaldehyde in water, methanol, 1-propanol, and isoprenol at temperatures of $283-333$ K and formaldehyde concentrations of 0.06 − 0.30 g g⁻¹.     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

Extracting safe thread schedules from incomplete model checking results

Model checkers frequently fail to completely verify a concurrent program, even if partial-order reduction is applied. The verification engineer is left in doubt whether the program is safe and the effort toward verifying the program is wasted. We present a technique that uses the results of such incomplete verification attempts to construct a (fair) scheduler that allows the safe execution of the partially verified concurrent program. This scheduler restricts the execution to schedules that have been proven safe (and prevents executions that were found to be erroneous). We evaluate the performance of our technique and show how it can be improved using partial-order reduction. While constraining the scheduler results in a considerable performance penalty in general, we show that in some cases our approach—somewhat surprisingly—even leads to faster executions.