A Distributed Routing Method for Dynamic Multicasting

Single point, sender based control does not scale well for multicast delivery. For applications, such as group video or teleconferencing a low total cost multicast tree is required. In this article we present a destination driven algorithm to minimize the total tree cost of multicast tree in a dynamic situation for the whole session duration. In this heuristic approach we considered the staying duration of participants are available at the time of joining. The performance of our algorithm is analyzed through extensive simulation and evaluated against several other existing dynamic multicast routing and also against one well known near optimum heuristic algorithm used for solving Steiner tree problem. We have further tested our algorithm using erroneous information given by the joining participants. Simulation results show that its performance does not degrade that much even when the range of error is considerably high, which proves the robustness of our algorithm.     

Process for cobalt separation and recovery in the presence of nickel from sulphate solutions by Cyanex 272

The present paper deals with the extraction of cobalt from a solution containing cobalt and nickel in a sulphate medium similar to the leach liquor obtained by the dilute sulphuric acid pressure leaching of the Pacific Ocean nodules matte followed by copper extraction. The commercial extractant Cyanex 272 (bis (2, 4, 4-trimethylpentyl) phosphinic acid) is used for this purpose. The leach liquor used for the present study contains Co =1.78 g/L and Ni=16.78 g/L. Before cobalt extraction, impurities, such as copper and iron, are removed from the leach liquor by the precipitation method. Increasing the concentration of Cyanex 272 increased the extraction percentage of cobalt due to the increase of equilibrium pH. Cobalt extraction efficiency of >99.9 % is achieved with 0.20 M Cyanex 272 in two counter-current stages at an aqueous: organic (A:O) phase ratio of 1.5∶1. Complete stripping of cobalt from the loaded organic containing 2.73 g/L Co was carried out at pH 1.4 by a synthetic cobalt spent electrolyte in two stages at an A:O ratio of 1∶2. The enrichment of cobalt during extraction and stripping operations was about 3.5 times. A complete process flowsheet for the separation and recovery of cobalt is presented.     

Improvement of lubrication and cooling in grinding

The presence of air boundary layer around a grinding wheel impedes the proper entry of cutting fluid into grinding zone and thereby lubrication and cooling are hampered. It leads to the thermal damage to the workpiece and rapid wheel wear. This experimental work is aimed at increasing the lubrication and cooling effects in grinding by a novel method of using scraper board. The experiments are conducted, using the scraper board, to find the critical region where the air pressure is zero. The coolant jet has then impinged into the grinding zone which is maintained within the critical region. The requirement of specific energy, surface texture, and mechanical properties of the ground surface are analyzed and compared with the traditional grinding and the grinding at various positions of scraper board. Results show that the grinding ratio improved by 35.6and 119%, surface roughness decreased by 36 and 54.2%, while the requirement of specific energy is reduced by 50.8 and 57.3% when scraper board is positioned at the critical distance in comparison to the 57.5° position and no scraper board, respectively. The results indicate that the introduction of fluid in the present method can improve the process efficiency and the product quality effectively.     

A ROBUST MART ALGORITHM FOR TOMOGRAPHIC APPLICATIONS

The present work is concerned with the development of a robust reconstruction algorithm for applications involving tomography. In an earlier study it was shown that among the ART family of algorithms, the multiplicative algebraic reconstruction algorithm (MART) was the most appropriate for tomographic reconstruction [1]. In the present work, the MART algorithm has been extended so that (a) its performance is now acceptable over a wider range of relaxation factors, (b) the time requirement for convergence to a solution is lower, and (c) its performance is less sensitive to noise in the projection data. Applications considered for evaluating the proposed algorithms are (1) a circular region with holes, (2) a three-dimensional temperature field in a differentially heated fluid layer, and (3) experimental data recorded in a differentially heated fluid layer using an interferometer. The proposed algorithms are seen to be an improvement over those presently available, for all three examples considered.     

Electrophoretic Deposition of Zirconia Thin Film on Nonconducting Substrate for Solid Oxide Fuel Cell Application

Electrophoretic deposition (EPD) of 8 mol% yttria‐stabilized zirconia (YSZ) electrolyte thin film has been carried out onto nonconducting porous NiO‐YSZ cermet anode substrate using a fugitive and electrically conducting polymer interlayer for solid oxide fuel cell (SOFC) application. Such polymer interlayer burnt out during the high‐temperature sintering process (1400°C for 6 h) leaving behind a well adhered, dense, and uniform ceramic YSZ electrolyte film on the top of the porous anode substrate. The EPD kinetics have been studied in depth. It is found that homogeneous and uniform film could be obtained onto the polymer‐coated substrate at an applied voltage of 15 V for 1 min. After the half‐cell (anode + electrolyte) is co‐fired at 1400°C, a suitable cathode composition (La_0.65Sr_0.3MnO₃) thick film paste is screen printed on the top of the sintered YSZ electrolyte. A second stage of sintering of such cathode thick film at 1100°C for 2 h finally yield a single cell SOFC. Such single cell produced a power output of 0.91 W/cm² at 0.7 V when measured at 800°C using hydrogen and oxygen as fuel and oxidant, respectively.     

CNS: a new energy efficient transmission scheme for wireless sensor networks

We present in this paper a new energy-efficient communication scheme called CNS (Compression with Null Symbol) that combines the power of data compression and communication through silent symbol. The concept of communication through silent symbol is borrowed from the energy efficient schemes proposed in Sinha (Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009), Ghosh et al. (Proceedings of 27th IEEE international performance computing and communications conference (IPCCC), USA, pp. 85–92, 2008), and Sinha and Sinha (Proceedings of international conference on distributed computing and internet technologies (ICDCIT), LNCS, pp. 139–144, 2008). We show that the average theoretical energy saving at the transmitter by CNS is 62.5%, assuming an ideal channel and for equal likelihood of all possible binary strings of a given length. Next, we propose a transceiver design that uses a hybrid modulation scheme utilizing FSK and ASK so as to keep the cost/complexity of the radio devices low. Considering an additive white gaussian noise (AWGN) channel and a non-coherent detection based receiver, CNS shows a saving in transmitter energy by 30% when compared to binary FSK, for equal likelihood of all possible binary strings of a given length. Simultaneously, there is a saving of 50% at the receiver for all types of data modulation due to halving of the transmitted data duration, compared to binary encoding. In contrast, RBNSiZeComm proposed in Sinha (Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009), TSS proposed in Ghosh et al. (Proceedings of 27th IEEE international performance computing and communications conference (IPCCC), USA, pp. 85–92, 2008) and RZE proposed in Sinha and Sinha (Proceedings of international conference on distributed computing and internet technologies (ICDCIT), LNCS, pp. 139–144, 2008) generate average transmitter energy savings of about 41, 20, and 35.2%, respectively. Also, at the receiver side, while RBNSiZeComm does not generate any saving, TSS and RZE produce about 36.9 and 12.5% savings on an average, respectively. Considering certain data types that may occur in the context of some wireless sensor networks (WSN) based applications (e.g., remote healthcare, agricultural WSNs, etc.), our simulation results demonstrate that for AWGN noisy channels, the transmitter side savings vary from about 33–50% on an average, while for RBNSiZeComm, this saving is about 33–61% on the same data set (Sinha in Proceedings of 6th IEEE consumer communications and networking conference (CCNC), Las Vegas, pp. 1–5, 2009). Thus, taking into account the low cost/complexity of the proposed transceiver, these results clearly establish that CNS can be a suitable candidate for communication in low power wireless sensor networks, such as in remote healthcare applications, body area networks, home automation, WSNs for agriculture and many others.     

Swing-up and stabilization of a cart–pendulum system under restricted cart track length

This paper describes the swing-up and stabilization of a cart–pendulum system with a restricted cart track length and restricted control force using generalized energy control methods. Starting from a pendant position, the pendulum is swung up to the upright unstable equilibrium configuration using energy control principles. An “energy well” is built within the cart track to prevent the cart from going outside the limited length. When sufficient energy is acquired by the pendulum, it goes into a “cruise” mode when the acquired energy is maintained. Finally, when the pendulum is close to the upright configuration, a stabilizing controller is activated around a linear zone about the upright configuration. The proposed scheme has worked well both in simulation and a practical setup and the conditions for stability have been derived using the multiple Lyapunov functions approach.     

Medium-access control protocols for WDM-based optical access networks with passive-star clusters interconnected by a backbone ring

This paper investigates the performance of medium access control (MAC) protocols in a wavelength-division multiplexing (WDM) based optical access network consisting of a backbone ring interconnecting several passive-star-based clusters of optical networking units (ONUs) at customer premises. Each cluster is connected to the backbone through an access node (AN). A scheduler located in each AN, executes two MAC protocols, one for the intracluster traffic and the other for the intercluster traffic. In order to maintain the quality of service, the scheduler in the AN employs, priority-based queuing for the intercluster traffic on pre-assigned wavelengths. For controlling the intracluster traffic, the scheduler employs pre-transmission coordination with ranging and look-ahead functionalities in the MAC protocol. The performance of MAC protocol for intracluster traffic is evaluated through event-driven simulation, while for intercluster traffic the MAC performance is evaluated through analytical modeling of the queuing system employing two dynamic bandwidth management schemes. Performance of the intracluster MAC protocol is shown to be improved by novel use of subcarrier multiplexing on the wavelength used for the control packet transmission. A comparative study of the two intercluster schemes in terms of end-to-end delay is carried out, to understand the effect of priority queuing on the real-time and non-real-time service packets.     

A dynamic multicast routing satisfying multiple QoS constraints

In this paper we propose a QoS‐based routing algorithm for dynamic multicasting. The complexity of the problem can be reduced to a simple shortest path problem by applying a Weighted Fair Queuing (WFQ) service discipline. Using a modified Bellman–Ford algorithm, the proposed routing builds a multicast tree, where a node is added to the existing multicast tree without re‐routing and satisfying QoS constraints. With user defined life‐time of connection this heuristic algorthm builds multicast tree which is near optimum over the whole duration of session. Simulation results show that tree costs are nearly as good as other dynamic multicast routings that does not consider QoS. Copyright © 2003 John Wiley & Sons, Ltd.