Synthesis of thermoresponsive copolymer/silica-coated magnetite nanoparticle composite and its application for heavy metal ion recovery

To enhance chemical stability and suppress of aggregation of magnetite nanoparticles (MNPs), which are used as a support for thermoresponsive copolymer immobilization, silica coating of the MNPs is applied via the electrooxidation method. Although the resulting silica coated-MNPs also formed aggregates, the size distribution of the aggregate shifted to smaller size range. Because of that, the surface area available for copolymer immobilization increased approximately 6.7 times at maximum as compared with that of the uncoated MNPs. It contributed to the increase of the amount of the immobilized copolymer on the silica-coated MNPs, which is approximately four times larger than that on the uncoated MNPs. Fe₃O₄ dissolution test confirmed enhancement of chemical stability of MNPs. The thermoresponsive copolymer immobilized on the silica-coated MNPs shows the ability to recycle Cu(II) ion from Cu(II) containing solution by changing temperature with significantly shorter time than those in other thermoresponsive adsorbents in gel form.     

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering, the studies related to risk analysis methodology, design, and operational management, physical phenomena, and emergency preparedness and nuclear security, have been progressed. Especially, ‘risk analysis methodology’ and ‘design and operational management’ are the main categories of the field, in which more than half of published articles on Journal of Nuclear Science and Technology are related to these categories.     

Study of the Antioxidative Properties of Several Amino Acid-Type Surfactants and their Synergistic Effect in Mixed Micelle

Cysteine and methionine, two sulfur-containing amino acids (AA), were introduced in their surfactant forms as potential antioxidants. The antioxidative (AOX) properties of lauroyl methionine (C12-Met) and lauroyl cysteine (C12-Cys) was investigated by means of the oxygen radical absorbance capacity assay. Both the surfactants exhibited excellent AOX behavior at the premicellar state and micellar medium. The AOX behavior was found to be comparable for both the surfactants at their premicellar states. However, in micellar medium, C12-Met showed better AOX property than C12-Cys. The AOX power of the surfactants was compared with other previously developed AA-type surfactants. The order of the AOX power was found to be: C12-tryptophan > C12-tyrosine ≈ C12-methionine ≈ C12-cysteine > C12-histidine at the premicellar state and C12-tryptophan > C12-tyrosine > C12-methionine > C12-cysteine > C12-histidine at the micellar state. C12-Cys displayed lower AOX property in micellar medium due to its dimer formation tendency. Based on the HPLC and UPLC-Q-TOF-MS analysis, the dimer formation of C12-Cys was found to be accelerated due to the micellar environment and results into negative synergistic effect on other aromatic AA-type surfactants. However, the presence of C12-His in the micellar solution of C12-Cys resulted no synergistic effect due to stronger H-bonding between the surfactants and resulting less dimer formation.     

The Potential Role of Hepatocyte Growth Factor in Degenerative Disorders of the Synovial Joint and Spine

This paper aims to provide a comprehensive review of the changing role of hepatocyte growth factor (HGF) signaling in the healthy and diseased synovial joint and spine. HGF is a multifunctional growth factor that, like its specific receptor c-Met, is widely expressed in several bone and joint tissues. HGF has profound effects on cell survival and proliferation, matrix metabolism, inflammatory response, and neurotrophic action. HGF plays an important role in normal bone and cartilage turnover. Changes in HGF/c-Met have also been linked to pathophysiological changes in degenerative joint diseases, such as osteoarthritis (OA) and intervertebral disc degeneration (IDD). A therapeutic role of HGF has been proposed in the regeneration of osteoarticular tissues. HGF also influences bone remodeling and peripheral nerve activity. Studies aimed at elucidating the changing role of HGF/c-Met signaling in OA and IDD at different pathophysiological stages, and their specific molecular mechanisms are needed. Such studies will contribute to safe and effective HGF/c-Met signaling-based treatments for OA and IDD.     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Effects of Smart Charging of Multiple Electric Vehicles in Reducing Power Generation Fuel Cost

The high penetration of variable sources of renewable power generation will lead to operational difficulties in supply/demand balancing in the entire power system. The mass deployment of electric vehicles (EVs) and plug‐in hybrid vehicles (PHEVs) will also cause significant changes in electricity demand. Therefore, controlling and managing the charging time of EVs/PHEVs are effective approaches that are imperative for improving balancing in power system operation. We assumed travel patterns for EVs in a model of the future Tokyo power system and analyzed the power system loads, including the charging load of the EVs, under several charging control scenarios. We verified that charging time controls are substantially effective for reducing the fuel costs in the power system. Further, we found that load leveling under a multicar charging management scenario gave the best results in terms of the fuel costs in all cases.     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

二氧化碳地中隔离技术及其岩石力学问题

寻求经济又安全的强有力减排技术关系到日本政府能否履行在京都议定书中所作的承诺。二氧化碳是主要的温室气体，二氧化碳地中隔离是把从集中排放源分离得到的二氧化碳注入地下深处具有适当封闭条件的地层中隔离起来，即把二氧化碳归还原处——地球深部。介绍了二氧化碳地中隔离的概念及国际动态，并基于隔离容量、机理、安全性及成本分析，论述其可行性。     

Palladium‐Catalyzed Three‐Component Reaction of 3‐(Tri‐n‐ butylstannyl)allyl Acetates,Aldehydes, and Triorganoboranes: An Alternative to the Carbonyl Allylation Using α,γ‐Substituted Allylic Tin Reagents

A three‐component reaction of 3‐(tri‐n‐butylstannyl)allyl acetates, aldehydes, and triorganoboranes in the presence of a palladium‐Xantphos catalyst system predominately gave (E)‐anti‐homoallylic alcohols with high diastereoselectivity and good to high levels of alkene stereocontrol. An efficient chirality transfer was observed when an enantioenriched substrate was employed. The reaction was initiated by the formation of an allylic gem‐palladium/stannyl intermediate, which subsequently underwent allylation of the aldehyde by an allyltributyltin followed by a coupling reaction of the in‐situ‐generated (E)‐vinylpalladium acetate with the triorganoborane.