Effect of microstructural features on the corrosion behavior of severely deformed Al–Mg–Si alloy

The aim of this study was to determine the influence of severe plastic deformation processing and the changes in microstructure resulting therefrom on the corrosion resistance of an Al–Mg–Si alloy. The alloy was processed using incremental equal channel angular pressing, which caused a reduction in grain size from 15 to 0.9 µm. The grain refinement was accompanied by an increase in the number of grain boundaries and dislocations, and by changes in grain orientation. However, there was no change in the size and number of intermetallic particles, which presumably resulted in a constant number of galvanic couplings. Electrochemical experiments revealed only slight differences between the samples before and after processing. Higher potential transients/oscillations upon immersion and increased corrosion currents in the vicinity of corrosion potential point to slightly higher reactivity of the most refined material. This indicates that intermetallic particles are the most crucial microstructural elements in terms of corrosion resistance. Their impact exceeds that of grain boundaries, in particular, at the stage of corrosion initiation. The development of corrosion attack is controlled more by the microstructure of the matrix as the grain refinement resulted in a less pronounced corrosion attack in comparison with the coarse-grained sample.     

Color–concept associations: A cross‐occupational and ‐cultural study and comparison

This study used a questionnaire survey to examine color–concept associations in two occupational groups from Hebei Province in China: steel workers (n = 139) and managerial staff (n = 74). The color stereotypes held by these two groups were also compared to those held by three other cultural groups studied elsewhere (Hong Kong Chinese, Yunnan Chinese, and Americans). The participants were presented with 16 concepts and asked to choose one of 10 colors to represent each concept. The chi‐square test results showed that each concept was significantly associated with at least one color. Both the steel workers and the managerial staff primarily associated green with “go” and “safe” and red with “stop” and “danger.” The cross‐group comparisons indicated that the steel workers and the managerial staff produced stronger color associations than those produced by the Yunnan Chinese and the Hong Kong Chinese subjects, but weaker than those produced by the US subjects. Our findings build on existing knowledge of population stereotypes for color–concept associations and provide guidelines for the design of color displays and products for global users. © 2013 Wiley Periodicals, Inc. Col Res Appl, 39, 630–635, 2014     

Precedence constrained TSP arising in printed circuit board assembly

Component placement sequencing is a challenging problem that arises in automated assembly of printed circuit boards. While for some placement machines all placement sequences are acceptable, in other cases some sequences are not allowed because of the shape of the placement head. In such cases, while the head moves down to perform a placement, it might damage a previously placed component, and the problem of determining a minimum cost and at the same time acceptable sequence leads to a Precedence Constrained Travelling Salesman Problem formulation. In this study, a solution procedure to such a formulation is developed and its implementation in a real PCB assembly environment is discussed.     

A Stretchable and Flexible Cardiac Tissue–Electronics Hybrid Enabling Multiple Drug Release,Sensing, and Stimulation

Replacement of the damaged scar tissue created by a myocardial infarction is the goal of cardiac tissue engineering. However, once the implanted tissue is in place, monitoring its function is difficult and involves indirect methods, while intervention necessarily requires an invasive procedure and available medical attention. To overcome this, methods of integrating electronic components into engineered tissues have been recently presented. These allow for remote monitoring of tissue function as well as intervention through stimulation and controlled drug release. Here, an improved hybrid microelectronic tissue construct capable of withstanding the dynamic environment of the beating heart without compromising electronic or mechanical functionality is reported. While the reported system is enabled to sense the function of the engineered tissue and provide stimulation for pacing, an electroactive polymer on the electronics enables it to release multiple drugs in parallel. It is envisioned that the integration of microelectronic devices into engineered tissues will provide a better way to monitor patient health from afar, as well as provide facile, more exact methods to control the healing process.     

Tensile stress relaxation in unsaturated granular materials

The mechanics of granular media at low liquid saturation levels remain poorly understood. Macroscopic mechanical properties are affected by microscale forces and processes, such as capillary forces, inter-particle friction, liquid flows, and particle movements. An improved understanding of these microscale mechanisms is important for a range of industrial applications and natural phenomena (e.g. landslides). This study focuses on the transient evolution of the tensile stress of unsaturated granular media under extension. Experimental results suggest that the stress state of the material evolves even after cessation of sample extension. Moreover, we observe that the packing density strongly affects the efficiency of different processes that result in tensile stress relaxation. By comparing the observed relaxation time scales with published data, we conclude that tensile stress relaxation is governed by particle rearrangement and fluid redistribution. An increased packing density inhibits particle rearrangement and only leaves fluid redistribution as the major process that governs tensile stress relaxation.     

A novel energy‐based approach for merging finite elements

A novel approach for merging two intersecting finite elements is presented and demonstrated. The solution mimics concepts from biology and uses principles rooted in continuum mechanics. The problem of attaching (or merging) two coincident finite elements is common when using the plastering technique as part of the advancing front method. This problem is particularly challenging for 3‐D meshes of non‐convex shapes. Some automatic meshing methods require portions of the partially formed mesh to coincide and merge. This problem is generally solved with heuristic rules, which lack generality, and may have difficulties with unforeseen situations. The problem of merging two overlapping polyhedra may also appear in other applications such as computer graphics and CAD software. A new approach to address the problem of merging is presented here. This solution does not utilize heuristic rules, but rather uses an approach based on minimization of strain energy. A fully automatic merging routine has been created that can address, in an optimum way, any situation of two nearby or overlapping elements that are to be merged. This approach, with minor adjustments, is suitable for most types of 3‐D elements. Copyright © 2010 John Wiley & Sons, Ltd.     

Weak Convex Decomposition by Lines‐of‐sight

We define the convexity rank of a set of points to be the portion of mutually visible pairs of points out of the total number of pairs. Based on this definition of weak convexity, we introduce a spectral method that decomposes a given shape into weakly convex regions. The decomposition is applied without explicitly measuring the convexity rank. The method merely amounts to a spectral clustering of a matrix representing the all‐pairs line of sight. Our method can be directly applied on an oriented point cloud and does not require any topological information, nor explicit concavity or convexity measures. We demonstrate the efficiency of our algorithm on a large number of examples and compare them qualitatively with competitive approaches.