Ultra-compact with improved data rate optical encoder based on 2D linear photonic crystal ring resonator

Photonic Network Communications - In the present work, a high-speed optical encoder is proposed based on two-dimensional photonic crystal ring resonator using coupled mode theory and resonance...     

Birds of prey: identifying lexical irregularities in spam on Twitter

Wireless Networks - The advent of spam on social media platforms has lead to a number of problems not only for social media users but also for researchers mining social media data. While there has...     

Formation of acrylamide in microwave-roasted sorghum and associated dietary risk

The effect of microwave roasting parameters (300, 450 and 600 W; 5, 10 and 15 min) on acrylamide content in sorghum grain was determined using High Pressure Liquid Chromatography (HPLC)-photo diode array (PDA) detector coupled with C-18 column. Samples roasted at 300 and 450 W did not possess acrylamide, whereas 600 W (15 min) favoured formation of 2740.19 µg/kg of acrylamide, levels far exceeding the defined European Union (EU) limits. The chronic daily intake (CDI) for acrylamide through consumption of such grain flour was 3.25–9.5-fold higher to Joint FAO/WHO Expert Committee on Food Additives (JECFA) defined high exposure limits. The margin of exposure (MOE) values ranged from 4.3 to 12.76 and from 11.07 to 32.27 for neoplastic and neurological effects, respectively, demonstrating high exposure and serious health concerns associated with dietary intake of this toxicant. This study assesses the risk for the Indian population and highlights the importance of optimising process parameters for food product to minimise such exposure risks.     

In vitro and in vivo degradability,biocompatibility and antimicrobial characteristics of Cu added iron-manganese alloy

In recent years,iron(Fe)based degradable metal is explored as an alternative to permanent fracture fixation devices.In the present work,copper(Cu)is added in Fe-Mn system to enhance the degradation rate and antimicrobial properties.Fe-Mn-xCu(x=0.9,5 and 10 wt.％)alloys are prepared by the melting-casting-forging route.XRD analysis confirms austenite phase stabilization due to the presence of Mn and Cu.As predicted by Thermo-Calc calculations,Cu rich phase precipitations are noticed along the austen-ite grain boundaries.Degradation behaviours of Cu added Fe-Mn alloys are investigated through static immersion and electrochemical polarization where enhanced degradation is found for higher Cu added alloys.When challenged against E.Coli bacteria,the Fe-Mn-Cu alloy media extract shows a significant bac-tericidal effect compare to the base alloy.In vitro cytocompatibility studies,as determined using MG63 and MC3T3-E1 cell lines,indicate increased cell density as a function of time for all the alloys.When implanted in rabbit femur,the newly developed alloy does not show any kind of tissue necrosis around the implants.Better osteogenesis and higher new bone formation are observed with Fe-Mn-10Cu alloy as evident from micro-computed tomography(μ-CT)and fluorochrome labelling.     

Sol-gel auto-combustion synthesis of Ba–Sr hexaferrite ceramic powders

We report the mechanism involved in sol-gel auto-combustion synthesis of Ba–Sr-hexaferrite (Ba_1-xSr_xFe₁₂O₁₉; x = 0, 0.25, 0.5, 0.75 and 1, BSFO) ceramic powders through the analysis of the phases evolved during annealing of the as-synthesized powders, along with their structure and morphological studies. The XRD patterns of the as-synthesized samples indicate the formation of barium/strontium monoferrite ((Ba/Sr)Fe₂O₄) and maghemite (γ-Fe₂O₃) phases along with a minute amount of hematite (α-Fe₂O₃) phase. Annealing of these samples facilitates formation of BSFO phase through the solid state reaction between BaFe₂O₄ and γ-Fe₂O₃ phase. Interestingly, after annealing the samples with x = 0, 0.5 and 1, at 1000 °C for 2 h, we observed that phase pure Ba–Sr hexaferrite structure forms, but for samples with x = 0.25 and 0.75, high amount of hematite (α-Fe₂O₃) phase is observed, especially for x = 0.75. The reason associated with this could be the large difference between the ionic radii of Ba²⁺ and Sr²⁺ ions occupying the oxygen site. Furthermore, our study on annealing dependent phase evolution confirms that, this difference in ionic radii forbids the formation of a single phase Ba–Sr hexaferrite. The growth of clear hexagonal-shaped plate-like particles with varied particle sizes was observed for all the samples. The particle size variation may be due to the influence of the ionic radii difference on the sinterability of the samples. Our study provides a better understanding of synthesis mechanism of Ba–Sr hexaferrite samples.     

Enhancement of resistance to galvanic corrosion of ZE41 Mg alloy by equal channel angular pressing

The galvanic corrosion behavior of as-received and ECAPed ZE41 Mg alloy coupled with Al7075 alloy is investigated using zero resistance ammeter in three different corrosive environments, 0, 0.1, and 1 M NaCl, to mimic the conditions experienced in engineering applications. The mechanism of galvanic corrosion for the ZE41 Mg–Al7075 aluminum alloy is explained. It is observed that a robust surface film containing a composite layer of oxide/hydroxide of magnesium and aluminum is established in deionized water (0 M). However, only a single layer of magnesium oxide/hydroxide is detected in chloride-containing environments. Equal channel angular pressing (ECAP) improved the resistance to galvanic corrosion by 58% and 54% when compared with the as-cast counterparts in 0 and 1 M NaCl solution, respectively. In contrast, galvanic corrosion resistance decreased by 26% in 0.1 M NaCl after ECAP while the as-received samples evinced pits unfavorable to be used in engineering applications. ECAP is a promising method to combat galvanic corrosion encountered by ZE41 magnesium alloy used in automobiles and components of military vehicles.     

Enhanced upconversion study of Er3+-Yb3+ codoped NaYF4 phosphors synthesized by the reverse microemulsion method

Herein, nanocrystals of Er³⁺ and Er³⁺, Yb³⁺ co-doped NaYF₄ upconversion (UC) phosphor were prepared via the reverse-microemulsion method. The impact of different concentrations of Er³⁺ ions on the UC emission intensity after 980?nm diode laser excitation is discussed. The structure, morphology and composition of the nanophosphors were confirmed by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and the results showed the presence of NaYF₄ nanocrystals with hexagonal phases of NaYF₄. The UC spectra revealed two emission bands including a green and a red emission band and the CIE coordinate for the samples were estimated. The present research revealed that the reverse-microemulsion approach will be suitable for the synthesis of efficient upconversion nanophosphors.     

High‐performance thermosets with tailored properties derived from methacrylated eugenol and epoxy‐based vinyl ester

A renewable chemical, eugenol, is methacrylated to produce methacrylated eugenol (ME) employing the Steglich esterification reaction without any solvent. The resulting ME is used as a low‐viscosity co‐monomer to replace styrene in a commercial epoxy‐based vinyl ester resin (VE). The volatility and viscosity of ME and styrene are compared. The effect of ME loading and temperature on the viscosity of the VE–ME resin is investigated. Moreover, the thermomechanical properties, curing extent and thermal stability of the fully cured VE–ME thermosets are systematically examined. The results indicate that ME is a monomer with low volatility and low viscosity, and therefore the incorporation of ME monomer in VE resins allows significant reduction of viscosity. Moreover, the viscosity of the VE–ME resin can be tailored by adjusting the ME loadings and processing temperature to meet commercial liquid molding technology requirements. The glass transition temperatures of VE–ME thermosets range from 139 to 199 °C. In addition, more than 95% of the monomer is incorporated and fixed in the crosslinked network structure of VE–ME thermosets. Overall, the developed ME monomer exhibits promising potential for replacing styrene as an effective low‐viscosity co‐monomer. The VE–ME resins show great advantages for use in polymer matrices for high‐performance fiber‐reinforced composites. This work is of great significance to the vinyl ester industry by providing detailed experimental support. © 2018 Society of Chemical Industry     

An optimized hybrid deep learning model using ensemble learning approach for human walking activities recognition

The Journal of Supercomputing - Recent advancements in edge computing devices motivate us to develop a sustainable and reliable technique for multiple gait activities recognition using wearable...